The object corresponds to cardIndex in the chassis mib.
If value of this object is 0, then the entry is not
associated to cardIndex of the chassis mib.
Parsed from file CISCO-DSP-MGMT-MIB.mib
Module: CISCO-DSP-MGMT-MIB
The object corresponds to cardIndex in the chassis mib.
If value of this object is 0, then the entry is not
associated to cardIndex of the chassis mib.
The object corresponds to cardIndex in the chassis mib.
If value of this object is 0, then the entry is not
associated to cardIndex of the chassis mib.
Parsed from file CISCO-DSP-MGMT-MIB.my.txt
Company: None
Module: CISCO-DSP-MGMT-MIB
The object corresponds to cardIndex in the chassis mib.
If value of this object is 0, then the entry is not
associated to cardIndex of the chassis mib.
cdspCardIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object corresponds to cardIndex in the chassis mib. If value of this object is 0, then the entry is not associated to cardIndex of the chassis mib." ::= { cdspCardStatusEntry 1 }
cdspCardIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The object corresponds to cardIndex in the chassis mib. If value of this object is 0, then the entry is not associated to cardIndex of the chassis mib." ::= { cdspCardStatusEntry 1 }
Vendor: Cisco
Module: CISCO-DSP-MGMT-MIB
[Automatically extracted from oidview.com]
cdspCardIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object corresponds to cardIndex in the chassis mib. If value of this object is 0, then the entry is not associated to cardIndex of the chassis mib." ::= { cdspCardStatusEntry 1 }
cdspCardIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The object corresponds to cardIndex in the chassis mib. If value of this object is 0, then the entry is not associated to cardIndex of the chassis mib." ::= { cdspCardStatusEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.86.1.1.1.1.2 | cdspCardState | 0 | 0 | The object indicates the current state of DSP card being monitored. normal - DSP card in normal condition. warning - DSP card h… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.3 | cdspCardResourceUtilization | 0 | 0 | The object indicates the percentage of current DSP resource utilization of the card. The utilization is a ratio of number of busy… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.4 | cdspCardLastHiWaterUtilization | 0 | 0 | The object indicates the last high water mark of DSP resource utilization. This object is reset to 0 after DSP card is reset. |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.5 | cdspCardLastResetTime | 0 | 0 | The value of sysUpTime when the last DSP card reset occurred. |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.6 | cdspCardMaxChanPerDSP | 0 | 0 | The maximum number of channels allowed in each DSP. The value is chosen in an implementation-dependent manner by the DSP function… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.7 | cdspTotalDsp | 0 | 0 | The total number of DSPs in the card. |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.8 | cdspFailedDsp | 0 | 0 | The number of DSPs in the failed state (i.e cdspOperstate is 'failed') |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.9 | cdspDspSwitchOverThreshold | 0 | 0 | This object specifies the threshold of DSP failures. When 'cdspFailedDsp' reaches the value of this object, the voice gateway swi… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.10 | cdspCongestedDsp | 0 | 0 | The number of DSPs in the congested state (i.e cdspOperstate is 'congested'). |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.11 | cdspNormalDsp | 0 | 0 | The number of DSPs in the normal state (i.e cdspOperstate is 'normal'). |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.12 | cdspNx64Dsp | 0 | 0 | This object specifies the number of DSPs that need to be set aside for making Nx64 calls. The max value of this object is limited… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.13 | cdspCodecTemplateSupported | 0 | 0 | This object indicates the codec template supported in DSP image. The codec template can be: tgw - Codec template for wireline … |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.14 | cdspCardVideoPoolUtilization | 0 | 0 | The object indicates the percentage of current DSP video resource pool utilization of the card. |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.15 | cdspCardVideoPoolUtilizationThreshold | 0 | 0 | This object specifies the threshold of DSP video pool resource usage. When cdspCardVideoPoolUtilization crosses the value of this… |