The number of DSPs in the congested state (i.e
cdspOperstate is 'congested').
Parsed from file CISCO-DSP-MGMT-MIB.mib
Module: CISCO-DSP-MGMT-MIB
The number of DSPs in the congested state (i.e
cdspOperstate is 'congested').
The number of DSPs in the congested state (i.e
cdspOperstate is 'congested').
Parsed from file CISCO-DSP-MGMT-MIB.my.txt
Company: None
Module: CISCO-DSP-MGMT-MIB
The number of DSPs in the congested state (i.e
cdspOperstate is 'congested').
cdspCongestedDsp OBJECT-TYPE SYNTAX Gauge32 (0..2048) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DSPs in the congested state (i.e cdspOperstate is 'congested')." ::= { cdspCardStatusEntry 10 }
cdspCongestedDsp OBJECT-TYPE SYNTAX Gauge(0..2048) ACCESS read-only STATUS mandatory DESCRIPTION "The number of DSPs in the congested state (i.e cdspOperstate is 'congested')." ::= { cdspCardStatusEntry 10 }
Vendor: Cisco
Module: CISCO-DSP-MGMT-MIB
[Automatically extracted from oidview.com]
cdspCongestedDsp OBJECT-TYPE SYNTAX Gauge32 (0..2048) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DSPs in the congested state (i.e cdspOperstate is 'congested')." ::= { cdspCardStatusEntry 10 }
cdspCongestedDsp OBJECT-TYPE SYNTAX Gauge32 (0..2048) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DSPs in the congested state (i.e cdspOperstate is 'congested')." ::= { cdspCardStatusEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.86.1.1.1.1.1 | cdspCardIndex | 0 | 0 | The object corresponds to cardIndex in the chassis mib. If value of this object is 0, then the entry is not associated to cardInd… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.2 | cdspCardState | 0 | 0 | The object indicates the current state of DSP card being monitored. normal - DSP card in normal condition. warning - DSP card h… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.3 | cdspCardResourceUtilization | 0 | 0 | The object indicates the percentage of current DSP resource utilization of the card. The utilization is a ratio of number of busy… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.4 | cdspCardLastHiWaterUtilization | 0 | 0 | The object indicates the last high water mark of DSP resource utilization. This object is reset to 0 after DSP card is reset. |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.5 | cdspCardLastResetTime | 0 | 0 | The value of sysUpTime when the last DSP card reset occurred. |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.6 | cdspCardMaxChanPerDSP | 0 | 0 | The maximum number of channels allowed in each DSP. The value is chosen in an implementation-dependent manner by the DSP function… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.7 | cdspTotalDsp | 0 | 0 | The total number of DSPs in the card. |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.8 | cdspFailedDsp | 0 | 0 | The number of DSPs in the failed state (i.e cdspOperstate is 'failed') |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.9 | cdspDspSwitchOverThreshold | 0 | 0 | This object specifies the threshold of DSP failures. When 'cdspFailedDsp' reaches the value of this object, the voice gateway swi… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.11 | cdspNormalDsp | 0 | 0 | The number of DSPs in the normal state (i.e cdspOperstate is 'normal'). |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.12 | cdspNx64Dsp | 0 | 0 | This object specifies the number of DSPs that need to be set aside for making Nx64 calls. The max value of this object is limited… |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.13 | cdspCodecTemplateSupported | 0 | 0 | This object indicates the codec template supported in DSP image. The codec template can be: tgw - Codec template for wireline … |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.14 | cdspCardVideoPoolUtilization | 0 | 0 | The object indicates the percentage of current DSP video resource pool utilization of the card. |
| 1.3.6.1.4.1.9.9.86.1.1.1.1.15 | cdspCardVideoPoolUtilizationThreshold | 0 | 0 | This object specifies the threshold of DSP video pool resource usage. When cdspCardVideoPoolUtilization crosses the value of this… |