Description 1
ON/OFF from supervisor enabling
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.9839.2.1.1.73
ON/OFF from supervisor enabling
Identification
{1 3 6 1 4 1 9839 2 1 1 73}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.1.73.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 6 distinct definitions; some records may not include a definition.
syson OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "ON/OFF from supervisor enabling"
::= { digitalObjects 73 }mal_low2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Probe 2 threshold of low is exeeded"
::= { digitalObjects 73 }mal_ov2 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressor 2 overload"
::= { digitalObjects 73 }digital_out_4 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DigOut 4"
DEFVAL { 0 }
::= { digitalObjects 73 }mal_clock32 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Clock alarm"
::= { digitalObjects 73 }mall_ore_comp3 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maintenance hours threshold exceeded alarm,comp3"
::= { digitalObjects 73 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
ON/OFF from supervisor enabling
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Probe 2 threshold of low is exeeded
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Compressor 2 overload
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
DigOut 4
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Clock alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Maintenance hours threshold exceeded alarm,comp3
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: syson
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"syson",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"ON/OFF from supervisor enabling\"",
"::=",
"{",
"digitalObjects",
"73",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"ON/OFF from supervisor enabling"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: mal_low2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal_low2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Probe 2 threshold of low is exeeded\"",
"::=",
"{",
"digitalObjects",
"73",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Probe 2 threshold of low is exeeded"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-insgrd-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: mal_ov2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal_ov2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor 2 overload\"",
"::=",
"{",
"digitalObjects",
"73",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor 2 overload"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mod_ch-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: digital_out_4
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"digital_out_4",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"DigOut 4\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"73",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"DigOut 4"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: mal_clock32
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal_clock32",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Clock alarm\"",
"::=",
"{",
"digitalObjects",
"73",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Clock alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-screw_compressor-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: mall_ore_comp3
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mall_ore_comp3",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Maintenance hours threshold exceeded alarm,comp3\"",
"::=",
"{",
"digitalObjects",
"73",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Maintenance hours threshold exceeded alarm,comp3"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.1.51 | alarmRHS, manual-reset-static-press-Alarm, glb-al, glb_al, all_ext_del, a1_e1, mal_maint_dev10, sel_rele_all_hf, cooling_heating, en_stampante, mal_oil_level, s_epromnook, a1_id, din107, def_ext_da | 0 | 0 | Alarm: Room Humidity Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.52 | alarmCWOTS, enable-static-press-Warning, lead-comp, or-al-2lev, all_ext_ist, a1_e2, mal_maint_dev11, en_freecool, mal_low_pres, buzz_output, a2_hi, din108, anti_def_db | 0 | 0 | Alarm: Chilled Water Outlet T. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.53 | alarmC1Hours, manual-reset-static-press-Warning, wtrvlv-dir, range-t-ext, all_ha, a1_e3, mal_m_invdev1, cond_config, en_freeheat, mal_hp_transd, pro_pi, rele1_output, a2_lo, mall_term_klix1, end_def_de | 0 | 0 | ServiceAlarm: Compressor 1 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.54 | alarmC2Hours, enable-diff-press-Alarm, ups-on-alm, range-t-circ, all_hf, a1_ia, mal_broke_pr1, mal_serious, a2_ha, mall_term_klix2, sup_probe_a6 | 0 | 0 | ServiceAlarm: Compressor 2 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.55 | alarmC3Hours, manual-reset-diff-press-Alarm, pwrup-alm, range-t-man, all_sonda_amb, a1_da, mal_broke_pr2, ab_estate_inv_h6, en_compensazio, mal_fan1, si_sond_umid, a2_hf, mall_term_klix3, reset_alarm_p5 | 0 | 0 | ServiceAlarm: Compressor 3 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.56 | alarmC4Hours, enable-pressure-recovery, seetag-cust-alm1, range-t-ac, all_sonda_def, a1_ea, mal_broke_pr3, rotaz_compr_r5, inverter_steps, off_ventp_defr, mal_fan2, si_sond_acqua, a2_ed, mall_term_klix4, set_2_param_p6 | 0 | 0 | ServiceAlarm: Compressor 4 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.57 | alarmFilterHours, enable-Flow-Rate-Alarm, seetag-cust-alm2, umid-al, all_sonda_prod, a1_re, mal_pres_hpres, inverter, en_sbrin_cont, mal_pump_evap, si_sond_aria, mall_term_klix5, low_press_alarm_p7 | 0 | 0 | ServiceAlarm: Air Filter hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.58 | alarmHeat1Hours, manual-reset-Flow-Rate-Alarm, seetag-cust-alm3, range-u-amb, all_sonda_reg, a1_id, mal_pres_lpres, fc_valve_type, autostart, mal_master_offl, si_sond_acquain, mall_term_klix6 | 0 | 0 | ServiceAlarm: Heater 1 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.59 | alarmHeat2Hours, enable-Flow-Rate-recovery, seetag-cust-alm4, all_tem_min_s1, a2_hi, mal_block_dev1, not_fc_vlv_type, en_remoto, mal_unit2_offl, si_sond_ariain, mall_pres_h1 | 0 | 0 | ServiceAlarm: Heater 1 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.60 | alarmHumHours, enable-pCOWeb, shortcycle-alm-en, k-syson, mal_block_dev2, unloads_logic, mal_unit3_offl, bin_sta, mall_pres_h2, def_cmd | 0 | 0 | ServiceAlarm: Humidifier hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.61 | alarmUnitHours, fc-single-chiller, superv-off, xs-res-al, a2_ha, mal_block_dev3, valve4way_logic, mal_unit4_offl, si_rampap, mall_pres_h3 | 0 | 0 | ServiceAlarm: Unit hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.62 | alarmDI2, BMS-heartbeat, a2_hf, mal_block_dev4, mal_b1, es, mall_pres_h4 | 0 | 0 | Alarm by Digital Input 2 |
| 1.3.6.1.4.1.9839.2.1.1.63 | alarmDI4, sleep-mode, mal_block_dev5, mal_b2, si_comp_es, mall_pres_h5 | 0 | 0 | Alarm by Digital Input 4 |
| 1.3.6.1.4.1.9839.2.1.1.64 | alarmDI6, test-sm, a4_hc, mal_block_dev6, abil_rotaz, mal_b3, si_rampan, mall_pres_h6 | 0 | 0 | Alarm by Digital Input 6 |
| 1.3.6.1.4.1.9839.2.1.1.65 | alarmHum, ab-mediath, a4_pd, mal_block_dev7, sys_on, mal_b4, si_parz, mall_dif_olio1 | 0 | 0 | Humidifier General Alarm |
| 1.3.6.1.4.1.9839.2.1.1.66 | alarmGeneral, ustdby1-2, a4_bp, mal_block_dev8, mal_b5, si_rot2, mall_dif_olio2 | 0 | 0 | General Alarm |
| 1.3.6.1.4.1.9839.2.1.1.67 | alarm2ndLevel, emerg, mal_block_dev9, mal_b6, si_comp1_deu, mall_dif_olio3 | 0 | 0 | Standby Unit Switchover Alarm |
| 1.3.6.1.4.1.9839.2.1.1.68 | alarmA, mal_block_dev10, mal_b7, si_comp2_deu, mall_dif_olio4 | 0 | 0 | Type A Alarm |
| 1.3.6.1.4.1.9839.2.1.1.69 | alarmB, mal_block_dev11, mal_b8, mall_dif_olio5 | 0 | 0 | Type B Alarm |
| 1.3.6.1.4.1.9839.2.1.1.70 | alarmC, mal_high1, glb_al, mal_pump_cond_h, mall_dif_olio6 | 0 | 0 | Type C Alarm |
| 1.3.6.1.4.1.9839.2.1.1.71 | selDXCW, digital_out_2, mal_low1, man_freeze, mal_comp_hour, si_fasce, mall_ore_comp1 | 0 | 0 | DX/CW Switch on TC Units |
| 1.3.6.1.4.1.9839.2.1.1.72 | selSW, mal_high2, mal_ov1, mal_pump_cond, mall_ore_comp2 | 0 | 0 | Summer/Winter Switchover |
| 1.3.6.1.4.1.9839.2.1.1.74 | mal_n_devices, mal_ov3, syson1, mal_phase, si_rampap3v, mall_ore_comp4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.75 | systemOnOff, al-idrofrigo-pump-c-1, digital_out_6, mepromnook, mal_ov4, en_binati, mal_ld_transd, si_rampan3v, mall_ore_comp5 | 0 | 0 | System On-Off |
| 1.3.6.1.4.1.9839.2.1.1.76 | resetAlarm, al-idrofrigo-pump-c-2, digital_out_7, mal_clock, mal_cflow, en_sond_text, mal_voltage, manuale, mall_ore_comp6 | 0 | 0 | Alarm Reset |
| 1.3.6.1.4.1.9839.2.1.1.77 | resetHrsFilt, digital_out_8, syson, mal_eflow, en_sond_uext, mal_current, start_off, mall_term_vent1 | 0 | 0 | Filter Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.78 | resetHrC1, digital_out_9, mal_hp1, en_sond_def1, mal_pump_ev_h, mall_term_vent2 | 0 | 0 | Compressor 1 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.79 | resetHrC2, mal_hp2, en_sond_def2, mall_term_vent3 | 0 | 0 | Compressor 2 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.80 | resetHrC3, al-idrofrigo-fl-C, mal_od1, mal_disch_temp, alarm_e06, mall_term_vent4 | 0 | 0 | Compressor 3 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.81 | resetHrC4, mal_od2, mal_diff_pres, alarm_e08, mal_liquid_level | 0 | 0 | Compressor 4 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.82 | resetStC1, mal_lp1, mal_alco1_67_r, alarm_e09, mall_pres_lpres | 0 | 0 | Compressor 1 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.83 | resetStC2, mal_lp2, mal_alco1_68_r, alarm_e10, mall_pres_hpres | 0 | 0 | Compressor 2 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.84 | resetStC3, mal_hpt1, mal_alco1_69_r, alarm_e11, mal_low2 | 0 | 0 | Compressor 3 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.85 | resetStC4, mal_hpt2, mal_alco1_70_r, alarm_e12, mall_alta_mand | 0 | 0 | Compressor 4 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.86 | resetHrH1, mal_serious, tipo_cont, mal_alco1_71_r, mal_low_press | 0 | 0 | Heater 1 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.87 | resetHrH2, mal_f1_overload, mal_alco1_72_r, mal_high_press | 0 | 0 | Heater 2 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.88 | resetStH1, sl_alm_1, mal_f2_overload, mal_alco1_73_r, mal_n_input | 0 | 0 | Heater 1 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.89 | resetStH2, mal_f3_overload, mal_alco1_74_r, mal_n_devices | 0 | 0 | Heater 2 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.90 | resetHrHU, mal_fan, mal_alco1_75_r, mall_ora | 0 | 0 | Humidifier Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.91 | resetStHU, mal_cpump, mal_alco1_760_r, mal_broke_pr1 | 0 | 0 | Humidifier Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.92 | resetHrACU, mal_pump, mal_alco1_97_r, mal_broke_pr2 | 0 | 0 | Unit Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.93 | mal_unit1_offl, glb_al | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.94 | mal_unit2_offl | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.95 | sleepmode, sv_mst_defrost_end, mal_unit3_offl | 0 | 0 | Setback Mode (Sleep Mode) |
| 1.3.6.1.4.1.9839.2.1.1.96 | smtest, sv_mst_defrost_start, mal_unit4_offl | 0 | 0 | Sleep Mode Test |
| 1.3.6.1.4.1.9839.2.1.1.97 | enablemeanT, sw_door_brk, mal_b1 | 0 | 0 | Local/Mean Usage of Values |
| 1.3.6.1.4.1.9839.2.1.1.98 | mal_b2 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.99 | mal_b3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.100 | c11-on, mal_b4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.101 | c12-on, mal_b5, syson | 0 | 0 |