OID reference
1.3.6.1.4.1.9839.2.1.1.75
System On-Off
Identification
{1 3 6 1 4 1 9839 2 1 1 75}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.1.75.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 9 distinct definitions; some records may not include a definition.
mal_ov4 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Compressor 4 overload"
::= { digitalObjects 75 }al-idrofrigo-pump-c-1 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Condensation pump 1 breaker switch alarm"
::= { digitalObjects 75 }mall_ore_comp5 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maintenance hours threshold exceeded alarm,comp5"
::= { digitalObjects 75 }en_binati OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enabling of fans shared"
DEFVAL { 0 }
::= { digitalObjects 75 }si_rampan3v OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "3p warm valve enabling"
::= { digitalObjects 75 }systemOnOff OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "System On-Off"
::= { digitalObjects 75 }mal_ld_transd OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Low pressure alarm from transducer "
::= { digitalObjects 75 }mepromnook OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Not operating Eeprom"
::= { digitalObjects 75 }digital_out_6 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DigOut 6"
DEFVAL { 0 }
::= { digitalObjects 75 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Compressor 4 overload
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Condensation pump 1 breaker switch alarm
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Maintenance hours threshold exceeded alarm,comp5
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Enabling of fans shared
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
3p warm valve enabling
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Low pressure alarm from transducer
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Not operating Eeprom
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
DigOut 6
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: mal_ov4
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal_ov4",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor 4 overload\"",
"::=",
"{",
"digitalObjects",
"75",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor 4 overload"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mod_ch-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: al-idrofrigo-pump-c-1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"al-idrofrigo-pump-c-1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Condensation pump 1 breaker switch alarm\"",
"::=",
"{",
"digitalObjects",
"75",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Condensation pump 1 breaker switch alarm"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: mall_ore_comp5
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mall_ore_comp5",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Maintenance hours threshold exceeded alarm,comp5\"",
"::=",
"{",
"digitalObjects",
"75",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Maintenance hours threshold exceeded alarm,comp5"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: en_binati
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"en_binati",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enabling of fans shared\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"75",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enabling of fans shared"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-rtop_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: si_rampan3v
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"si_rampan3v",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"3p warm valve enabling\"",
"::=",
"{",
"digitalObjects",
"75",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"3p warm valve enabling"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: systemOnOff
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"systemOnOff",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"System On-Off\"",
"::=",
"{",
"digitalObjects",
"75",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"System On-Off"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAREL-ug40cdz-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'RFC1213-MIB': ['DisplayString'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: mal_ld_transd
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mal_ld_transd",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Low pressure alarm from transducer \"",
"::=",
"{",
"digitalObjects",
"75",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Low pressure alarm from transducer"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-screw_compressor-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: mepromnook
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mepromnook",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Not operating Eeprom\"",
"::=",
"{",
"digitalObjects",
"75",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Not operating Eeprom"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-insgrd-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: digital_out_6
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"digital_out_6",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"DigOut 6\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"digitalObjects",
"75",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"DigOut 6"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.1.51 | alarmRHS, manual-reset-static-press-Alarm, glb-al, glb_al, all_ext_del, a1_e1, mal_maint_dev10, sel_rele_all_hf, cooling_heating, en_stampante, mal_oil_level, s_epromnook, a1_id, din107, def_ext_da | 0 | 0 | Alarm: Room Humidity Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.52 | alarmCWOTS, enable-static-press-Warning, lead-comp, or-al-2lev, all_ext_ist, a1_e2, mal_maint_dev11, en_freecool, mal_low_pres, buzz_output, a2_hi, din108, anti_def_db | 0 | 0 | Alarm: Chilled Water Outlet T. Sensor Failed/Disconnected |
| 1.3.6.1.4.1.9839.2.1.1.53 | alarmC1Hours, manual-reset-static-press-Warning, wtrvlv-dir, range-t-ext, all_ha, a1_e3, mal_m_invdev1, cond_config, en_freeheat, mal_hp_transd, pro_pi, rele1_output, a2_lo, mall_term_klix1, end_def_de | 0 | 0 | ServiceAlarm: Compressor 1 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.54 | alarmC2Hours, enable-diff-press-Alarm, ups-on-alm, range-t-circ, all_hf, a1_ia, mal_broke_pr1, mal_serious, a2_ha, mall_term_klix2, sup_probe_a6 | 0 | 0 | ServiceAlarm: Compressor 2 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.55 | alarmC3Hours, manual-reset-diff-press-Alarm, pwrup-alm, range-t-man, all_sonda_amb, a1_da, mal_broke_pr2, ab_estate_inv_h6, en_compensazio, mal_fan1, si_sond_umid, a2_hf, mall_term_klix3, reset_alarm_p5 | 0 | 0 | ServiceAlarm: Compressor 3 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.56 | alarmC4Hours, enable-pressure-recovery, seetag-cust-alm1, range-t-ac, all_sonda_def, a1_ea, mal_broke_pr3, rotaz_compr_r5, inverter_steps, off_ventp_defr, mal_fan2, si_sond_acqua, a2_ed, mall_term_klix4, set_2_param_p6 | 0 | 0 | ServiceAlarm: Compressor 4 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.57 | alarmFilterHours, enable-Flow-Rate-Alarm, seetag-cust-alm2, umid-al, all_sonda_prod, a1_re, mal_pres_hpres, inverter, en_sbrin_cont, mal_pump_evap, si_sond_aria, mall_term_klix5, low_press_alarm_p7 | 0 | 0 | ServiceAlarm: Air Filter hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.58 | alarmHeat1Hours, manual-reset-Flow-Rate-Alarm, seetag-cust-alm3, range-u-amb, all_sonda_reg, a1_id, mal_pres_lpres, fc_valve_type, autostart, mal_master_offl, si_sond_acquain, mall_term_klix6 | 0 | 0 | ServiceAlarm: Heater 1 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.59 | alarmHeat2Hours, enable-Flow-Rate-recovery, seetag-cust-alm4, all_tem_min_s1, a2_hi, mal_block_dev1, not_fc_vlv_type, en_remoto, mal_unit2_offl, si_sond_ariain, mall_pres_h1 | 0 | 0 | ServiceAlarm: Heater 1 hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.60 | alarmHumHours, enable-pCOWeb, shortcycle-alm-en, k-syson, mal_block_dev2, unloads_logic, mal_unit3_offl, bin_sta, mall_pres_h2, def_cmd | 0 | 0 | ServiceAlarm: Humidifier hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.61 | alarmUnitHours, fc-single-chiller, superv-off, xs-res-al, a2_ha, mal_block_dev3, valve4way_logic, mal_unit4_offl, si_rampap, mall_pres_h3 | 0 | 0 | ServiceAlarm: Unit hour counter threshold |
| 1.3.6.1.4.1.9839.2.1.1.62 | alarmDI2, BMS-heartbeat, a2_hf, mal_block_dev4, mal_b1, es, mall_pres_h4 | 0 | 0 | Alarm by Digital Input 2 |
| 1.3.6.1.4.1.9839.2.1.1.63 | alarmDI4, sleep-mode, mal_block_dev5, mal_b2, si_comp_es, mall_pres_h5 | 0 | 0 | Alarm by Digital Input 4 |
| 1.3.6.1.4.1.9839.2.1.1.64 | alarmDI6, test-sm, a4_hc, mal_block_dev6, abil_rotaz, mal_b3, si_rampan, mall_pres_h6 | 0 | 0 | Alarm by Digital Input 6 |
| 1.3.6.1.4.1.9839.2.1.1.65 | alarmHum, ab-mediath, a4_pd, mal_block_dev7, sys_on, mal_b4, si_parz, mall_dif_olio1 | 0 | 0 | Humidifier General Alarm |
| 1.3.6.1.4.1.9839.2.1.1.66 | alarmGeneral, ustdby1-2, a4_bp, mal_block_dev8, mal_b5, si_rot2, mall_dif_olio2 | 0 | 0 | General Alarm |
| 1.3.6.1.4.1.9839.2.1.1.67 | alarm2ndLevel, emerg, mal_block_dev9, mal_b6, si_comp1_deu, mall_dif_olio3 | 0 | 0 | Standby Unit Switchover Alarm |
| 1.3.6.1.4.1.9839.2.1.1.68 | alarmA, mal_block_dev10, mal_b7, si_comp2_deu, mall_dif_olio4 | 0 | 0 | Type A Alarm |
| 1.3.6.1.4.1.9839.2.1.1.69 | alarmB, mal_block_dev11, mal_b8, mall_dif_olio5 | 0 | 0 | Type B Alarm |
| 1.3.6.1.4.1.9839.2.1.1.70 | alarmC, mal_high1, glb_al, mal_pump_cond_h, mall_dif_olio6 | 0 | 0 | Type C Alarm |
| 1.3.6.1.4.1.9839.2.1.1.71 | selDXCW, digital_out_2, mal_low1, man_freeze, mal_comp_hour, si_fasce, mall_ore_comp1 | 0 | 0 | DX/CW Switch on TC Units |
| 1.3.6.1.4.1.9839.2.1.1.72 | selSW, mal_high2, mal_ov1, mal_pump_cond, mall_ore_comp2 | 0 | 0 | Summer/Winter Switchover |
| 1.3.6.1.4.1.9839.2.1.1.73 | digital_out_4, mal_low2, mal_ov2, mal_clock32, syson, mall_ore_comp3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.74 | mal_n_devices, mal_ov3, syson1, mal_phase, si_rampap3v, mall_ore_comp4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.76 | resetAlarm, al-idrofrigo-pump-c-2, digital_out_7, mal_clock, mal_cflow, en_sond_text, mal_voltage, manuale, mall_ore_comp6 | 0 | 0 | Alarm Reset |
| 1.3.6.1.4.1.9839.2.1.1.77 | resetHrsFilt, digital_out_8, syson, mal_eflow, en_sond_uext, mal_current, start_off, mall_term_vent1 | 0 | 0 | Filter Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.78 | resetHrC1, digital_out_9, mal_hp1, en_sond_def1, mal_pump_ev_h, mall_term_vent2 | 0 | 0 | Compressor 1 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.79 | resetHrC2, mal_hp2, en_sond_def2, mall_term_vent3 | 0 | 0 | Compressor 2 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.80 | resetHrC3, al-idrofrigo-fl-C, mal_od1, mal_disch_temp, alarm_e06, mall_term_vent4 | 0 | 0 | Compressor 3 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.81 | resetHrC4, mal_od2, mal_diff_pres, alarm_e08, mal_liquid_level | 0 | 0 | Compressor 4 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.82 | resetStC1, mal_lp1, mal_alco1_67_r, alarm_e09, mall_pres_lpres | 0 | 0 | Compressor 1 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.83 | resetStC2, mal_lp2, mal_alco1_68_r, alarm_e10, mall_pres_hpres | 0 | 0 | Compressor 2 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.84 | resetStC3, mal_hpt1, mal_alco1_69_r, alarm_e11, mal_low2 | 0 | 0 | Compressor 3 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.85 | resetStC4, mal_hpt2, mal_alco1_70_r, alarm_e12, mall_alta_mand | 0 | 0 | Compressor 4 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.86 | resetHrH1, mal_serious, tipo_cont, mal_alco1_71_r, mal_low_press | 0 | 0 | Heater 1 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.87 | resetHrH2, mal_f1_overload, mal_alco1_72_r, mal_high_press | 0 | 0 | Heater 2 Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.88 | resetStH1, sl_alm_1, mal_f2_overload, mal_alco1_73_r, mal_n_input | 0 | 0 | Heater 1 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.89 | resetStH2, mal_f3_overload, mal_alco1_74_r, mal_n_devices | 0 | 0 | Heater 2 Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.90 | resetHrHU, mal_fan, mal_alco1_75_r, mall_ora | 0 | 0 | Humidifier Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.91 | resetStHU, mal_cpump, mal_alco1_760_r, mal_broke_pr1 | 0 | 0 | Humidifier Starting Counter Reset |
| 1.3.6.1.4.1.9839.2.1.1.92 | resetHrACU, mal_pump, mal_alco1_97_r, mal_broke_pr2 | 0 | 0 | Unit Run Hours Reset |
| 1.3.6.1.4.1.9839.2.1.1.93 | mal_unit1_offl, glb_al | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.94 | mal_unit2_offl | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.95 | sleepmode, sv_mst_defrost_end, mal_unit3_offl | 0 | 0 | Setback Mode (Sleep Mode) |
| 1.3.6.1.4.1.9839.2.1.1.96 | smtest, sv_mst_defrost_start, mal_unit4_offl | 0 | 0 | Sleep Mode Test |
| 1.3.6.1.4.1.9839.2.1.1.97 | enablemeanT, sw_door_brk, mal_b1 | 0 | 0 | Local/Mean Usage of Values |
| 1.3.6.1.4.1.9839.2.1.1.98 | mal_b2 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.99 | mal_b3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.100 | c11-on, mal_b4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.1.101 | c12-on, mal_b5, syson | 0 | 0 |