OID reference
1.3.6.1.4.1.9839.2.1.2.21
Cooling Prop.Band
Identification
{1 3 6 1 4 1 9839 2 1 2 21}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.2.21.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 13 distinct definitions; some records may not include a definition.
banda_temp_e OBJECT-TYPE
SYNTAX Integer32 (0..150)
UNITS "°C x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Summer temperature differential"
DEFVAL { 30 }
::= { analogObjects 21 }max_setp1 OBJECT-TYPE
SYNTAX Integer32 (-990..999)
UNITS "°C/°F/bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Selection of the probe 1 maximum setpoint"
DEFVAL { 50 }
::= { analogObjects 21 }r1 OBJECT-TYPE
SYNTAX Integer32 (100..380)
UNITS "°C x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Swimming pool temperature setpoint."
DEFVAL { 280 }
::= { analogObjects 21 }tmin_vel_inv_f7 OBJECT-TYPE
SYNTAX Integer32 (-32767..500)
UNITS "bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Temperature value for min Heating speed. pressure"
DEFVAL { 130 }
::= { analogObjects 21 }coolDiff OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "degrees C"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Cooling Prop.Band"
::= { analogObjects 21 }k_int OBJECT-TYPE
SYNTAX Integer32 (10..10000)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "PID proportinal gain"
DEFVAL { 100 }
::= { analogObjects 21 }diff_hum_r6 OBJECT-TYPE
SYNTAX Integer32 (10..200)
UNITS "%RH x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Humidification differential"
DEFVAL { 40 }
::= { analogObjects 21 }diff_low2 OBJECT-TYPE
SYNTAX Integer32 (0..3600)
UNITS "sec x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Low outlet alarm differential"
DEFVAL { 1200 }
::= { analogObjects 21 }setpoint-FCM OBJECT-TYPE
SYNTAX Integer32 (-999..999)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setpoint FCM"
::= { analogObjects 21 }opt-sns-2-y2 OBJECT-TYPE
SYNTAX Integer32 (-32768..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Analog Sensor 2 Maximum Value"
DEFVAL { 1000 }
::= { analogObjects 21 }anaout2 OBJECT-TYPE
SYNTAX Integer32
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "0-10V Ramp 2 Value (HW Valve/Rad Cooler Ramp)"
::= { analogObjects 21 }s1 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "°C/°F x10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Probe 1"
::= { analogObjects 21 }tmax_vel_inv_f8 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "°C/°F bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Temperature value for max Heating speed.Pressure"
DEFVAL { 90 }
::= { analogObjects 21 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Summer temperature differential
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Selection of the probe 1 maximum setpoint
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Swimming pool temperature setpoint.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Temperature value for min Heating speed. pressure
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
PID proportinal gain
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Humidification differential
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Low outlet alarm differential
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Setpoint FCM
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Analog Sensor 2 Maximum Value
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 11
0-10V Ramp 2 Value (HW Valve/Rad Cooler Ramp)
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 12
Probe 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 13
Temperature value for max Heating speed.Pressure
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: banda_temp_e
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"banda_temp_e",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"150",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Summer temperature differential\"",
"DEFVAL",
"{",
"30",
"}",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
150
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Summer temperature differential"
],
null,
null,
null,
[
"DEFVAL",
30
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-rtop_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: max_setp1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"max_setp1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"990",
".",
".",
"999",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462f6261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Selection of the probe 1 maximum setpoint\"",
"DEFVAL",
"{",
"50",
"}",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-990,
999
]
]
]
],
[
"UNITS",
"°C/°F/bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Selection of the probe 1 maximum setpoint"
],
null,
null,
null,
[
"DEFVAL",
50
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-insgrd-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: r1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"r1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"100",
".",
".",
"380",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Swimming pool temperature setpoint.\"",
"DEFVAL",
"{",
"280",
"}",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
100,
380
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Swimming pool temperature setpoint."
],
null,
null,
null,
[
"DEFVAL",
280
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-aria-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: tmin_vel_inv_f7
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tmin_vel_inv_f7",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"500",
")",
"UNITS",
[
"literal",
"226261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Temperature value for min Heating speed. pressure\"",
"DEFVAL",
"{",
"130",
"}",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
500
]
]
]
],
[
"UNITS",
"bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Temperature value for min Heating speed. pressure"
],
null,
null,
null,
[
"DEFVAL",
130
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: coolDiff
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"coolDiff",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"2264656772656573204322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Cooling Prop.Band\"",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"degrees C"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Cooling Prop.Band"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAREL-ug40cdz-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'RFC1213-MIB': ['DisplayString'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: k_int
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"k_int",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"10",
".",
".",
"10000",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"PID proportinal gain\"",
"DEFVAL",
"{",
"100",
"}",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
10,
10000
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"PID proportinal gain"
],
null,
null,
null,
[
"DEFVAL",
100
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: diff_hum_r6
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"diff_hum_r6",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"10",
".",
".",
"200",
")",
"UNITS",
[
"literal",
"222552482078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Humidification differential\"",
"DEFVAL",
"{",
"40",
"}",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
10,
200
]
]
]
],
[
"UNITS",
"%RH x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Humidification differential"
],
null,
null,
null,
[
"DEFVAL",
40
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: diff_low2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"diff_low2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"3600",
")",
"UNITS",
[
"literal",
"227365632078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Low outlet alarm differential\"",
"DEFVAL",
"{",
"1200",
"}",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
3600
]
]
]
],
[
"UNITS",
"sec x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Low outlet alarm differential"
],
null,
null,
null,
[
"DEFVAL",
1200
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: setpoint-FCM
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"setpoint-FCM",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"999",
".",
".",
"999",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Setpoint FCM\"",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-999,
999
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Setpoint FCM"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: opt-sns-2-y2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"opt-sns-2-y2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32768",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Analog Sensor 2 Maximum Value\"",
"DEFVAL",
"{",
"1000",
"}",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32768,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Analog Sensor 2 Maximum Value"
],
null,
null,
null,
[
"DEFVAL",
1000
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: anaout2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"anaout2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"0-10V Ramp 2 Value (HW Valve/Rad Cooler Ramp)\"",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"0-10V Ramp 2 Value (HW Valve/Rad Cooler Ramp)"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: s1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"s1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Probe 1\"",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Probe 1"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mio-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: tmax_vel_inv_f8
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tmax_vel_inv_f8",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b046206261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Temperature value for max Heating speed.Pressure\"",
"DEFVAL",
"{",
"90",
"}",
"::=",
"{",
"analogObjects",
"21",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"°C/°F bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Temperature value for max Heating speed.Pressure"
],
null,
null,
null,
[
"DEFVAL",
90
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller_cmp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.2.1 | roomTemp, setpoint-antifreeze1, ret-air-tmp, probeb3_rp, temp-amb, temp_ambiente, asp_conv, calibrazione_sonda_3, probeoffset_3, probe1, ing_sonda_0, probe_circ1, sonda_b1, ain_1, temp_aria_amb, temp, probe_0, h1, sonda_s1 | 0 | 0 | Room Temperature |
| 1.3.6.1.4.1.9839.2.1.2.2 | outdoorTemp, setpoint-antifreeze2, minmax-24hr-retair-maximum, probeb1_rn, temp-ext, temp_evap, press_mand_conv, calibr_sonda_ambiente, probeoffset_1, probe2, ing_sonda_1, probe_circ2, sonda_b2, ain_2, temp_aria_est, umid, probe_1, l1, sonda_s2_r6 | 0 | 0 | Ambient Temperature |
| 1.3.6.1.4.1.9839.2.1.2.3 | deliveryTemp, setpoint-Compensation, minmax-24hr-retair-minumum, probeb2_ro, temp-mand, set_point, set_comp, calibrazione_sonda_defrost, probeoffset_2, thrshitempprobe1, set_point1, setp_air_temp, sonda_b3, ain_3, acqua, probe_cal__c, h2, out_inv_fan, sonda_s3_r7, probe3 | 0 | 0 | Delivery Air Temperature |
| 1.3.6.1.4.1.9839.2.1.2.4 | cwTemp, hysteresis-Compensation, temp-setpoint, probeb4_rr, temp-circ, offset_probe, diff_comp, differenziale_alrm_ventole, fan_alarm_hyst, thrshitempprobe2, set_point2, inverter_fan, ain_4, aria_acqua_in, l2, inverter_comp1, sonda_s4_r8 | 0 | 0 | Chilled Water Temperature |
| 1.3.6.1.4.1.9839.2.1.2.5 | hwTemp, max-Compensation, temp-deadband, real_setp, temp-ac, control_delta, sg_bassa_asp, alrm_alta_temp, alarm_condenser, thrslotempprobe1, differenziale1, inverter_dev1, i_scala_press, ain_5, umid_ambiente, setpoint_valigia, temp_aria_man, h3, alarm_max_delta, set_comp, sonda_s5_r9 | 0 | 0 | Hot Water Temperature |
| 1.3.6.1.4.1.9839.2.1.2.6 | roomRH, setpoint-Differential, humidity-ain-offs, umid-amb, set_point_min, set_vent_off1, alrm_bassa_temp, alarm_condenser_delta, thrslotempprobe2, differenziale2, set_circuit1, f_scala_press, ain_6, umid_esterna, setpoint_poltrona, zona_morta, l3, alarm_min_delta, diff_comp, calibra_s1__6 | 0 | 0 | Room Relative Humidity |
| 1.3.6.1.4.1.9839.2.1.2.7 | cwoTemp, high-Limit, return-ain-offs, t-set, set_point_max, diff_vent, temp_ventole_on, zona_morta, set_c1_mask, calibra_b1, ain_7, setpoint_luna, banda_hum, h4, defrost_end_temp, set_fan, calibra_s2__7, temp_setp_st | 0 | 0 | Chilled Water Outlet Temperature |
| 1.3.6.1.4.1.9839.2.1.2.8 | evapPress1, low-Limit, cw-tmp, t-diff, defrost_end_temperature, sg_alta_asp, set_point_temperatura, offset_sonda, reduced_set, calibra_b2, ain_8, diffheat, set_hum_a, l4, fan_on_temp, diff_fan, calibra_s3__8, probe1_cal__c | 0 | 0 | Circuit 1 Evaporating Pressure |
| 1.3.6.1.4.1.9839.2.1.2.9 | evapPress2, max-Setpoint-Differential, disch-air-tmp, t-set-c, diff_alarm_fan, sg_alta_mand, temp_fine_sbrin, defrost_end_temp, sog_bassa_temp, set_inv_dev1, calibra_b3, analog_out_1, aout_1_display, sgl_l_temp, v3l, setpoint_min, voltage_in, calibra_s4__9 | 0 | 0 | Circuit 2 Evaporating Pressure |
| 1.3.6.1.4.1.9839.2.1.2.10 | suctTemp1, min-Setpoint-Differential, discharge-ain-offs, t-diff-c, sgl_alarm_min_rel, ins_comp, min_assegnaz_consentita_utente, fan_on_temp, sog_alta_temp, set_inv_fan, setp_estate, analog_out_2, sgl_h_temp, v3h, setpoint_max, max_set_co, calibra_s5__a | 0 | 0 | Circuit 1 Suction Temperature |
| 1.3.6.1.4.1.9839.2.1.2.11 | suctTemp2, setpoint-ASB-Inverter-pumps, cw-ain-offs, sum_setp_r1, ht-set, sgl_alarl_max_rel, dis_comp, max_assegnaz_consentita_utente, fan_on_cond, differenz_all, comp_setp, diff_estate, s_temp_setpoint, sgl_l_umid, v4l, setpoint_night, min_set_co, setp_est_r1 | 0 | 0 | Circuit 2 Suction Temperature |
| 1.3.6.1.4.1.9839.2.1.2.12 | evapTemp1, setpoint-DIFF-Inverter-pumps, engsaver-setpoint, win_setp_r9, lt-set, set_fan_off_rel, variaz_autom_setpoint_notturno, fan_cond_hyst, tempo_di_pwm, set_circuit2, setp_inverno, w_temp_setpoint, sgl_h_umid, v4h, reghyst, max_set_fa, differ_est_r2 | 0 | 0 | Circuit 1 Evap.Temperature |
| 1.3.6.1.4.1.9839.2.1.2.13 | evapTemp2, pressure-Out, opt1-analog, min_setp_t_ra, t-set-sm, delta_set_point, temperatura_rilev_max, setpoint_min, val_minimo_av, diff_circuit1, diff_inverno, cond_setpoint, set_temp_a, o1, max_store_value, min_set_fa, setp_inv_r3 | 0 | 0 | Circuit 2 Evap.Temperature |
| 1.3.6.1.4.1.9839.2.1.2.14 | ssh1, proportional-Band-Inverter-Pumps-PID, opt2-analog, max_setp_t_rb, t-set-c-sm, temperatura_rilev_min, setpoint_max, val_massimo_av, diff_circuit2, min_set_est, in_temp_setp, in_temp_band, o2, min_store_value, thresh_high1, differ_inv_r4 | 0 | 0 | Circuit 1 Superheat |
| 1.3.6.1.4.1.9839.2.1.2.15 | ssh2, integral-Time-Inverter-Pumps-PID, opt3-analog, sum_diff_r2, t-cw-dh, differenziale_regolatore, setpoint_night, set1_min_ok, thresh_low1, max_set_est, set_temp_ariae, o3, setpoint, diff_high1, set_min_est_ra, probe3_cal__8 | 0 | 0 | Circuit 2 Superheat |
| 1.3.6.1.4.1.9839.2.1.2.16 | coolRamp, derivative-Time-Inverter-Pumps-PID, opt4-analog, win_diff_r3, htset-cw, temp_minima_s1, reghyst, set1_max_ok, thresh_low2, min_set_inv, set_temp_ariai, o4, thresh_low1, set_max_est_rb | 0 | 0 | Cooling Valve Ramp |
| 1.3.6.1.4.1.9839.2.1.2.17 | heatRamp, hysteresis-Thermal-redundance, opt-sns-1-y1, n_zone_r4, t-set-cw, max_store_value, set2_min_ok, thresh_high1, max_set_inv, set_umid_est, banda_temp, ds1, diff_low1, set_min_inv_rc, probe2_cal__d | 0 | 0 | Heating Valve Ramp |
| 1.3.6.1.4.1.9839.2.1.2.18 | fanSpeed, min-Opening-3Way-Valve-Hydraulic, opt-sns-1-y2, hum_setp_r5, t-rc-es, tmp_evap_satura, min_store_value, set2_max_ok, thresh_high2, tmin_vel_est_f5, set_umid_inv, sgl_l_free, ds2, set_max_inv_rd | 0 | 0 | Evapor. Fan Speed |
| 1.3.6.1.4.1.9839.2.1.2.19 | opt-sns-1-ain-offs, max-Opening-3Way-Valve-Hydraulic, min_setp_h_rc, t-rc-est, setpoint, autorita, min_setp1, tmax_vel_est_f6, lim_sup_temp, sgl_h_free, ds3, diff_high2, tmin_vel_est_f5, temp_diff_rd | 0 | 0 | Analog Sensor 1 Calibration |
| 1.3.6.1.4.1.9839.2.1.2.20 | coolSetP, proportional-Band-3Way-Valve-Hydrauli-PID, opt-sns-2-y1, max_setp_h_rd, rampa-valv, superheat_set, min_setp2, tmin_vel_inv_f7, lim_inf_temp, ds4, thresh_low2, tmax_vel_est_f6 | 0 | 0 | Cooling Set Point |
| 1.3.6.1.4.1.9839.2.1.2.22 | cool2SetP, hysteresis-FCM, opt-sns-2-ain-offs, diff_dehum_r7, steam-production, td_int, max_setp2, toff_fan_est_f9, banda_temp_i, s2, tmax_vel_inv_f8 | 0 | 0 | Cooling 2nd Set Point |
| 1.3.6.1.4.1.9839.2.1.2.23 | heatSetP, max-Out-Speed-FCM, opt-sns-3-y1, n_zone_h_r8, t-set-lm, lim_inf_int, diff_inv_dev1, toff_fan_inv_fa, lim_sup_umid, r8, s3, toff_fan_est_f9, aut_ngt_set_r4 | 0 | 0 | Heating Set point |
| 1.3.6.1.4.1.9839.2.1.2.24 | heat2SetP, min-Out-Speed-FCM, opt-sns-3-y2, authority_rg, delta-lm, offset_sh, diff_inv_fan, parametro_d3, lim_inf_umid, s4, toff_fan_inv_fa | 0 | 0 | Heating 2nd Set point |
| 1.3.6.1.4.1.9839.2.1.2.25 | heatDiff, hysteresis-Cut-off-FCM, opt-sns-3-ain-offs, s_setp_b2_rh, parametro_d4, diff_umid_e, r12, tp_start_def_d3 | 0 | 0 | Heating Prop.Band |
| 1.3.6.1.4.1.9839.2.1.2.26 | thrsHT, max-Pressure-Alarm-FCM, opt-sns-4-y1, w_setp_b2_ri, set_al_agelo_a1, diff_umid_i, r13, probe_1, tp_end_def_d4 | 0 | 0 | High Room Temperature Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.2.27 | thrsLT, hysteresis-Max-Pressure-Alarm-FCM, opt-sns-4-y2, diff_freec_rl, dif_al_agelo_a2, probe_2, set_vent_inv, set_al_agelo_a1, t_max_tm_rt_rh | 0 | 0 | Low Room Temperature Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.2.28 | smCoolSetp, max-Out-FCM, opt-sns-4-ain-offs, min_t_freec_rn, set_res_gelo_a4, offset_fcool, probe_3, diff_vent_inv, dif_al_agelo_a2, t_min_tm_rt_rl | 0 | 0 | Setback Mode: Cooling Setpoint |
| 1.3.6.1.4.1.9839.2.1.2.29 | smHeatSetp, min-Pressure-Alarm-FCM, delta_p6, dif_res_gelo_a5, diff_fcool, probe_virtual, set_res_gelo_a4 | 0 | 0 | Setback Mode: Heating Setpoint |
| 1.3.6.1.4.1.9839.2.1.2.30 | cwDehumSetp, hysteresis-Min-Pressure-Alarm-FCM, delta_p7, probe_1, lim_set_gelo_a7, offset_fheat, r9, power_supply_voltage, dif_res_gelo_a5 | 0 | 0 | CW Setpoint to Start Dehumidification |
| 1.3.6.1.4.1.9839.2.1.2.31 | cwHtThrsh, min-Out-FCM, delta_p8, probe_2, set_res_risc_a8, diff_fheat, r2 | 0 | 0 | CW High Temperature Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.2.32 | cwModeSetp, delta-Freecooling, delta_p9, dif_res_risc_a9, set_mandata, r4, seinverter | 0 | 0 | CW Setpoint to start CW Operating Mode (Only TC Units) |
| 1.3.6.1.4.1.9839.2.1.2.33 | radcoolSpES, hysteresis-Freecooling, diff_pd, set_all_at_pb, ban_mandata, c5, diff_inv | 0 | 0 | Radcooler Setpoint in Energy Saving Mode |
| 1.3.6.1.4.1.9839.2.1.2.34 | radcoolSpDX, proportional-Band-Freecooling-PID, min_fan_s_f5, sonda_b4, set_esterno, c6 | 0 | 0 | Radcooler Setpoint in DX Mode |
| 1.3.6.1.4.1.9839.2.1.2.35 | delTempLimit, offset-Freecooling-PID, max_fan_s_f6, diff_esterno_e | 0 | 0 | Delivery Temperature Low Limit Setpoint |
| 1.3.6.1.4.1.9839.2.1.2.36 | dtAutChgMLT, temperature-Overlap-Freecooling, probeconvl, max_comp_e | 0 | 0 | Delta Temperature for Automatic Mean/Local Changeover |
| 1.3.6.1.4.1.9839.2.1.2.37 | min-out-freecooling, probeconvh, set_min, f3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.38 | neutral-zone-K-costant, calibrazione_sonda_b1, set_stop, c7 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.39 | neutral-zone-V-variable, calibrazione_sonda_b2, zona_morta, f4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.40 | proportional-Band-freecooling-Valve-PID, calibrazione_sonda_b3, zona_morta_u, p3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.41 | offset-Freecooling-Valve-PID, calibrazione_sonda_b4, sg_alta_in_e, p4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.42 | temperature-A-B, sg_bassa_in_e | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.43 | delta-Thermal-Excusion-Freecoling, sg_alta_in_i | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.44 | hysteresis-Thermal-Excusion-Freecoling, sg_bassa_in_i, d3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.45 | alarm-Setpoint-Static-Pressure-Hydraulic-circuit, d4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.46 | warnig-Setpoint-Static-Pressure-Hydraulic-circuit, d11, vis_temp_def_d | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.47 | alarm-Setpoint-Differential-Pressure-Hydraulic-circuit, vis_temp_3_da | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.48 | alarm-Setpoint-Flow-Rate-Hydraulic-circuit, tar_defrost1 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.49 | tar_defrost2, fan_alrm_dif_a0 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.50 | tempertaure-Cut-off-FCM | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.51 | r28 | 0 | 0 |