OID reference
1.3.6.1.4.1.9839.2.1.2.5
Hot Water Temperature
Identification
{1 3 6 1 4 1 9839 2 1 2 5}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.2.5.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 23 distinct definitions; some records may not include a definition.
alarm_condenser OBJECT-TYPE
SYNTAX Integer32 (0..1990)
UNITS "°C/°F x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Alarm high temperature condensator"
DEFVAL { 0 }
::= { analogObjects 5 }umid_ambiente OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "°C x10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Recirculated air relative humidity"
::= { analogObjects 5 }ain_5 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Analogue input 5"
::= { analogObjects 5 }i_scala_press OBJECT-TYPE
SYNTAX Integer32 (0..32767)
UNITS "bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Min. value current input"
DEFVAL { 0 }
::= { analogObjects 5 }setpoint_valigia OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "°C x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Unoccupied mode temperature setpoint."
::= { analogObjects 5 }temp-ac OBJECT-TYPE
SYNTAX Integer32
UNITS "deg.C x 10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hot Water Temperature"
::= { analogObjects 5 }ain_5 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "V/A/°C x10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Voltage / Current / External setpoint"
::= { analogObjects 5 }differenziale1 OBJECT-TYPE
SYNTAX Integer32 (1..999)
UNITS "bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Differential St1"
DEFVAL { 20 }
::= { analogObjects 5 }set_comp OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Compressor set-point"
DEFVAL { 10 }
::= { analogObjects 5 }inverter_dev1 OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "V x10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Display of the state of the device 1/valve"
::= { analogObjects 5 }h3 OBJECT-TYPE
SYNTAX Integer32 (-32767..10000)
UNITS "°C/°F x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "High threshold of alarm for the probe 3"
DEFVAL { 1000 }
::= { analogObjects 5 }alrm_alta_temp OBJECT-TYPE
SYNTAX Integer32 (0..200)
UNITS "°C x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "High temp alarm:indicates the max variation from the set-point"
DEFVAL { 0 }
::= { analogObjects 5 }sg_bassa_asp OBJECT-TYPE
SYNTAX Integer32 (-100..500)
UNITS "bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Limit of low suction pressure"
DEFVAL { 0 }
::= { analogObjects 5 }alarm_max_delta OBJECT-TYPE
SYNTAX Integer32 (0..1990)
UNITS "°C/°F x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "High temperature alarm delta"
DEFVAL { 0 }
::= { analogObjects 5 }differenziale1 OBJECT-TYPE
SYNTAX Integer32 (1..999)
UNITS "°C x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Differential 1"
DEFVAL { 20 }
::= { analogObjects 5 }temp-deadband OBJECT-TYPE
SYNTAX Integer32 (0..99)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Amount from setpoint before a comp is staged on"
DEFVAL { 0 }
::= { analogObjects 5 }hwTemp OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "degrees C"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hot Water Temperature"
::= { analogObjects 5 }sonda_s5_r9 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "bar x10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature/pressure defrosting 2,B5"
DEFVAL { 0 }
::= { analogObjects 5 }max-Compensation OBJECT-TYPE
SYNTAX Integer32 (-999..999)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Max. Compensation"
::= { analogObjects 5 }temp_aria_man OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Supply Air Temper."
::= { analogObjects 5 }thrslotempprobe1 OBJECT-TYPE
SYNTAX Integer32 (-500..100)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Threshold alarm low temperature probe 1"
::= { analogObjects 5 }control_delta OBJECT-TYPE
SYNTAX Integer32 (1..199)
UNITS "°C/°F x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Differential"
DEFVAL { 20 }
::= { analogObjects 5 }real_setp OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "°C x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set point"
DEFVAL { 200 }
::= { analogObjects 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Alarm high temperature condensator
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Recirculated air relative humidity
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Analogue input 5
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Min. value current input
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Unoccupied mode temperature setpoint.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Voltage / Current / External setpoint
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Differential St1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Compressor set-point
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Display of the state of the device 1/valve
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 11
High threshold of alarm for the probe 3
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 12
High temp alarm:indicates the max variation from the set-point
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 13
Limit of low suction pressure
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 14
High temperature alarm delta
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 15
Differential 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 16
Amount from setpoint before a comp is staged on
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 17
Temperature/pressure defrosting 2,B5
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 18
Max. Compensation
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 19
Supply Air Temper.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 20
Threshold alarm low temperature probe 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 21
Differential
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 22
Set point
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: alarm_condenser
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alarm_condenser",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1990",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Alarm high temperature condensator\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1990
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alarm high temperature condensator"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercellasplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: umid_ambiente
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"umid_ambiente",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Recirculated air relative humidity\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Recirculated air relative humidity"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-rtop_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: ain_5
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ain_5",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Analogue input 5\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Analogue input 5"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mod_ch-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: i_scala_press
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"i_scala_press",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"226261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Min. value current input\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
32767
]
]
]
],
[
"UNITS",
"bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Min. value current input"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller_cmp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: setpoint_valigia
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"setpoint_valigia",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Unoccupied mode temperature setpoint.\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Unoccupied mode temperature setpoint."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-aria-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: temp-ac
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"temp-ac",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"226465672e43207820313022"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Hot Water Temperature\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"deg.C x 10"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Hot Water Temperature"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: hwTemp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwTemp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"2264656772656573204322"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Hot Water Temperature\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"degrees C"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Hot Water Temperature"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAREL-ug40cdz-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'RFC1213-MIB': ['DisplayString'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: ain_5
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ain_5",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22562f412fc2b0432078313022"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Voltage / Current / External setpoint\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"V/A/°C x10"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Voltage / Current / External setpoint"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-screw_compressor-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: differenziale1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"differenziale1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"999",
")",
"UNITS",
[
"literal",
"226261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Differential St1\"",
"DEFVAL",
"{",
"20",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
999
]
]
]
],
[
"UNITS",
"bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Differential St1"
],
null,
null,
null,
[
"DEFVAL",
20
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_ap-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: set_comp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"set_comp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"226261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Compressor set-point\"",
"DEFVAL",
"{",
"10",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Compressor set-point"
],
null,
null,
null,
[
"DEFVAL",
10
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: inverter_dev1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"inverter_dev1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"22562078313022"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Display of the state of the device 1/valve\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
[
"UNITS",
"V x10"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Display of the state of the device 1/valve"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-insgrd-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: h3
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"h3",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"10000",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"High threshold of alarm for the probe 3\"",
"DEFVAL",
"{",
"1000",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
10000
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"High threshold of alarm for the probe 3"
],
null,
null,
null,
[
"DEFVAL",
1000
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mio-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: alrm_alta_temp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alrm_alta_temp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"200",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"High temp alarm:indicates the max variation from the set-point\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
200
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"High temp alarm:indicates the max variation from the set-point"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: sg_bassa_asp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sg_bassa_asp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"100",
".",
".",
"500",
")",
"UNITS",
[
"literal",
"226261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Limit of low suction pressure\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-100,
500
]
]
]
],
[
"UNITS",
"bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Limit of low suction pressure"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cfp_ncp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: alarm_max_delta
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"alarm_max_delta",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1990",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"High temperature alarm delta\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1990
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"High temperature alarm delta"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: differenziale1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"differenziale1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"999",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Differential 1\"",
"DEFVAL",
"{",
"20",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
999
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Differential 1"
],
null,
null,
null,
[
"DEFVAL",
20
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_t-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: temp-deadband
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"temp-deadband",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"99",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Amount from setpoint before a comp is staged on\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
99
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Amount from setpoint before a comp is staged on"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: sonda_s5_r9
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sonda_s5_r9",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"226261722078313022"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Temperature/pressure defrosting 2,B5\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"bar x10"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Temperature/pressure defrosting 2,B5"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: max-Compensation
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"max-Compensation",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"999",
".",
".",
"999",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Max. Compensation\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-999,
999
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Max. Compensation"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: temp_aria_man
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"temp_aria_man",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Supply Air Temper.\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Supply Air Temper."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: thrslotempprobe1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"thrslotempprobe1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"500",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Threshold alarm low temperature probe 1\"",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-500,
100
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Threshold alarm low temperature probe 1"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-wlprobe-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: control_delta
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"control_delta",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"199",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Differential\"",
"DEFVAL",
"{",
"20",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
199
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Differential"
],
null,
null,
null,
[
"DEFVAL",
20
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mcella-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir_32-MIB
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: real_setp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"real_setp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Set point\"",
"DEFVAL",
"{",
"200",
"}",
"::=",
"{",
"analogObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Set point"
],
null,
null,
null,
[
"DEFVAL",
200
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.2.1 | roomTemp, setpoint-antifreeze1, ret-air-tmp, probeb3_rp, temp-amb, temp_ambiente, asp_conv, calibrazione_sonda_3, probeoffset_3, probe1, ing_sonda_0, probe_circ1, sonda_b1, ain_1, temp_aria_amb, temp, probe_0, h1, sonda_s1 | 0 | 0 | Room Temperature |
| 1.3.6.1.4.1.9839.2.1.2.2 | outdoorTemp, setpoint-antifreeze2, minmax-24hr-retair-maximum, probeb1_rn, temp-ext, temp_evap, press_mand_conv, calibr_sonda_ambiente, probeoffset_1, probe2, ing_sonda_1, probe_circ2, sonda_b2, ain_2, temp_aria_est, umid, probe_1, l1, sonda_s2_r6 | 0 | 0 | Ambient Temperature |
| 1.3.6.1.4.1.9839.2.1.2.3 | deliveryTemp, setpoint-Compensation, minmax-24hr-retair-minumum, probeb2_ro, temp-mand, set_point, set_comp, calibrazione_sonda_defrost, probeoffset_2, thrshitempprobe1, set_point1, setp_air_temp, sonda_b3, ain_3, acqua, probe_cal__c, h2, out_inv_fan, sonda_s3_r7, probe3 | 0 | 0 | Delivery Air Temperature |
| 1.3.6.1.4.1.9839.2.1.2.4 | cwTemp, hysteresis-Compensation, temp-setpoint, probeb4_rr, temp-circ, offset_probe, diff_comp, differenziale_alrm_ventole, fan_alarm_hyst, thrshitempprobe2, set_point2, inverter_fan, ain_4, aria_acqua_in, l2, inverter_comp1, sonda_s4_r8 | 0 | 0 | Chilled Water Temperature |
| 1.3.6.1.4.1.9839.2.1.2.6 | roomRH, setpoint-Differential, humidity-ain-offs, umid-amb, set_point_min, set_vent_off1, alrm_bassa_temp, alarm_condenser_delta, thrslotempprobe2, differenziale2, set_circuit1, f_scala_press, ain_6, umid_esterna, setpoint_poltrona, zona_morta, l3, alarm_min_delta, diff_comp, calibra_s1__6 | 0 | 0 | Room Relative Humidity |
| 1.3.6.1.4.1.9839.2.1.2.7 | cwoTemp, high-Limit, return-ain-offs, t-set, set_point_max, diff_vent, temp_ventole_on, zona_morta, set_c1_mask, calibra_b1, ain_7, setpoint_luna, banda_hum, h4, defrost_end_temp, set_fan, calibra_s2__7, temp_setp_st | 0 | 0 | Chilled Water Outlet Temperature |
| 1.3.6.1.4.1.9839.2.1.2.8 | evapPress1, low-Limit, cw-tmp, t-diff, defrost_end_temperature, sg_alta_asp, set_point_temperatura, offset_sonda, reduced_set, calibra_b2, ain_8, diffheat, set_hum_a, l4, fan_on_temp, diff_fan, calibra_s3__8, probe1_cal__c | 0 | 0 | Circuit 1 Evaporating Pressure |
| 1.3.6.1.4.1.9839.2.1.2.9 | evapPress2, max-Setpoint-Differential, disch-air-tmp, t-set-c, diff_alarm_fan, sg_alta_mand, temp_fine_sbrin, defrost_end_temp, sog_bassa_temp, set_inv_dev1, calibra_b3, analog_out_1, aout_1_display, sgl_l_temp, v3l, setpoint_min, voltage_in, calibra_s4__9 | 0 | 0 | Circuit 2 Evaporating Pressure |
| 1.3.6.1.4.1.9839.2.1.2.10 | suctTemp1, min-Setpoint-Differential, discharge-ain-offs, t-diff-c, sgl_alarm_min_rel, ins_comp, min_assegnaz_consentita_utente, fan_on_temp, sog_alta_temp, set_inv_fan, setp_estate, analog_out_2, sgl_h_temp, v3h, setpoint_max, max_set_co, calibra_s5__a | 0 | 0 | Circuit 1 Suction Temperature |
| 1.3.6.1.4.1.9839.2.1.2.11 | suctTemp2, setpoint-ASB-Inverter-pumps, cw-ain-offs, sum_setp_r1, ht-set, sgl_alarl_max_rel, dis_comp, max_assegnaz_consentita_utente, fan_on_cond, differenz_all, comp_setp, diff_estate, s_temp_setpoint, sgl_l_umid, v4l, setpoint_night, min_set_co, setp_est_r1 | 0 | 0 | Circuit 2 Suction Temperature |
| 1.3.6.1.4.1.9839.2.1.2.12 | evapTemp1, setpoint-DIFF-Inverter-pumps, engsaver-setpoint, win_setp_r9, lt-set, set_fan_off_rel, variaz_autom_setpoint_notturno, fan_cond_hyst, tempo_di_pwm, set_circuit2, setp_inverno, w_temp_setpoint, sgl_h_umid, v4h, reghyst, max_set_fa, differ_est_r2 | 0 | 0 | Circuit 1 Evap.Temperature |
| 1.3.6.1.4.1.9839.2.1.2.13 | evapTemp2, pressure-Out, opt1-analog, min_setp_t_ra, t-set-sm, delta_set_point, temperatura_rilev_max, setpoint_min, val_minimo_av, diff_circuit1, diff_inverno, cond_setpoint, set_temp_a, o1, max_store_value, min_set_fa, setp_inv_r3 | 0 | 0 | Circuit 2 Evap.Temperature |
| 1.3.6.1.4.1.9839.2.1.2.14 | ssh1, proportional-Band-Inverter-Pumps-PID, opt2-analog, max_setp_t_rb, t-set-c-sm, temperatura_rilev_min, setpoint_max, val_massimo_av, diff_circuit2, min_set_est, in_temp_setp, in_temp_band, o2, min_store_value, thresh_high1, differ_inv_r4 | 0 | 0 | Circuit 1 Superheat |
| 1.3.6.1.4.1.9839.2.1.2.15 | ssh2, integral-Time-Inverter-Pumps-PID, opt3-analog, sum_diff_r2, t-cw-dh, differenziale_regolatore, setpoint_night, set1_min_ok, thresh_low1, max_set_est, set_temp_ariae, o3, setpoint, diff_high1, set_min_est_ra, probe3_cal__8 | 0 | 0 | Circuit 2 Superheat |
| 1.3.6.1.4.1.9839.2.1.2.16 | coolRamp, derivative-Time-Inverter-Pumps-PID, opt4-analog, win_diff_r3, htset-cw, temp_minima_s1, reghyst, set1_max_ok, thresh_low2, min_set_inv, set_temp_ariai, o4, thresh_low1, set_max_est_rb | 0 | 0 | Cooling Valve Ramp |
| 1.3.6.1.4.1.9839.2.1.2.17 | heatRamp, hysteresis-Thermal-redundance, opt-sns-1-y1, n_zone_r4, t-set-cw, max_store_value, set2_min_ok, thresh_high1, max_set_inv, set_umid_est, banda_temp, ds1, diff_low1, set_min_inv_rc, probe2_cal__d | 0 | 0 | Heating Valve Ramp |
| 1.3.6.1.4.1.9839.2.1.2.18 | fanSpeed, min-Opening-3Way-Valve-Hydraulic, opt-sns-1-y2, hum_setp_r5, t-rc-es, tmp_evap_satura, min_store_value, set2_max_ok, thresh_high2, tmin_vel_est_f5, set_umid_inv, sgl_l_free, ds2, set_max_inv_rd | 0 | 0 | Evapor. Fan Speed |
| 1.3.6.1.4.1.9839.2.1.2.19 | opt-sns-1-ain-offs, max-Opening-3Way-Valve-Hydraulic, min_setp_h_rc, t-rc-est, setpoint, autorita, min_setp1, tmax_vel_est_f6, lim_sup_temp, sgl_h_free, ds3, diff_high2, tmin_vel_est_f5, temp_diff_rd | 0 | 0 | Analog Sensor 1 Calibration |
| 1.3.6.1.4.1.9839.2.1.2.20 | coolSetP, proportional-Band-3Way-Valve-Hydrauli-PID, opt-sns-2-y1, max_setp_h_rd, rampa-valv, superheat_set, min_setp2, tmin_vel_inv_f7, lim_inf_temp, ds4, thresh_low2, tmax_vel_est_f6 | 0 | 0 | Cooling Set Point |
| 1.3.6.1.4.1.9839.2.1.2.21 | coolDiff, setpoint-FCM, opt-sns-2-y2, diff_hum_r6, anaout2, k_int, max_setp1, tmax_vel_inv_f8, banda_temp_e, r1, s1, diff_low2, tmin_vel_inv_f7 | 0 | 0 | Cooling Prop.Band |
| 1.3.6.1.4.1.9839.2.1.2.22 | cool2SetP, hysteresis-FCM, opt-sns-2-ain-offs, diff_dehum_r7, steam-production, td_int, max_setp2, toff_fan_est_f9, banda_temp_i, s2, tmax_vel_inv_f8 | 0 | 0 | Cooling 2nd Set Point |
| 1.3.6.1.4.1.9839.2.1.2.23 | heatSetP, max-Out-Speed-FCM, opt-sns-3-y1, n_zone_h_r8, t-set-lm, lim_inf_int, diff_inv_dev1, toff_fan_inv_fa, lim_sup_umid, r8, s3, toff_fan_est_f9, aut_ngt_set_r4 | 0 | 0 | Heating Set point |
| 1.3.6.1.4.1.9839.2.1.2.24 | heat2SetP, min-Out-Speed-FCM, opt-sns-3-y2, authority_rg, delta-lm, offset_sh, diff_inv_fan, parametro_d3, lim_inf_umid, s4, toff_fan_inv_fa | 0 | 0 | Heating 2nd Set point |
| 1.3.6.1.4.1.9839.2.1.2.25 | heatDiff, hysteresis-Cut-off-FCM, opt-sns-3-ain-offs, s_setp_b2_rh, parametro_d4, diff_umid_e, r12, tp_start_def_d3 | 0 | 0 | Heating Prop.Band |
| 1.3.6.1.4.1.9839.2.1.2.26 | thrsHT, max-Pressure-Alarm-FCM, opt-sns-4-y1, w_setp_b2_ri, set_al_agelo_a1, diff_umid_i, r13, probe_1, tp_end_def_d4 | 0 | 0 | High Room Temperature Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.2.27 | thrsLT, hysteresis-Max-Pressure-Alarm-FCM, opt-sns-4-y2, diff_freec_rl, dif_al_agelo_a2, probe_2, set_vent_inv, set_al_agelo_a1, t_max_tm_rt_rh | 0 | 0 | Low Room Temperature Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.2.28 | smCoolSetp, max-Out-FCM, opt-sns-4-ain-offs, min_t_freec_rn, set_res_gelo_a4, offset_fcool, probe_3, diff_vent_inv, dif_al_agelo_a2, t_min_tm_rt_rl | 0 | 0 | Setback Mode: Cooling Setpoint |
| 1.3.6.1.4.1.9839.2.1.2.29 | smHeatSetp, min-Pressure-Alarm-FCM, delta_p6, dif_res_gelo_a5, diff_fcool, probe_virtual, set_res_gelo_a4 | 0 | 0 | Setback Mode: Heating Setpoint |
| 1.3.6.1.4.1.9839.2.1.2.30 | cwDehumSetp, hysteresis-Min-Pressure-Alarm-FCM, delta_p7, probe_1, lim_set_gelo_a7, offset_fheat, r9, power_supply_voltage, dif_res_gelo_a5 | 0 | 0 | CW Setpoint to Start Dehumidification |
| 1.3.6.1.4.1.9839.2.1.2.31 | cwHtThrsh, min-Out-FCM, delta_p8, probe_2, set_res_risc_a8, diff_fheat, r2 | 0 | 0 | CW High Temperature Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.2.32 | cwModeSetp, delta-Freecooling, delta_p9, dif_res_risc_a9, set_mandata, r4, seinverter | 0 | 0 | CW Setpoint to start CW Operating Mode (Only TC Units) |
| 1.3.6.1.4.1.9839.2.1.2.33 | radcoolSpES, hysteresis-Freecooling, diff_pd, set_all_at_pb, ban_mandata, c5, diff_inv | 0 | 0 | Radcooler Setpoint in Energy Saving Mode |
| 1.3.6.1.4.1.9839.2.1.2.34 | radcoolSpDX, proportional-Band-Freecooling-PID, min_fan_s_f5, sonda_b4, set_esterno, c6 | 0 | 0 | Radcooler Setpoint in DX Mode |
| 1.3.6.1.4.1.9839.2.1.2.35 | delTempLimit, offset-Freecooling-PID, max_fan_s_f6, diff_esterno_e | 0 | 0 | Delivery Temperature Low Limit Setpoint |
| 1.3.6.1.4.1.9839.2.1.2.36 | dtAutChgMLT, temperature-Overlap-Freecooling, probeconvl, max_comp_e | 0 | 0 | Delta Temperature for Automatic Mean/Local Changeover |
| 1.3.6.1.4.1.9839.2.1.2.37 | min-out-freecooling, probeconvh, set_min, f3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.38 | neutral-zone-K-costant, calibrazione_sonda_b1, set_stop, c7 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.39 | neutral-zone-V-variable, calibrazione_sonda_b2, zona_morta, f4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.40 | proportional-Band-freecooling-Valve-PID, calibrazione_sonda_b3, zona_morta_u, p3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.41 | offset-Freecooling-Valve-PID, calibrazione_sonda_b4, sg_alta_in_e, p4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.42 | temperature-A-B, sg_bassa_in_e | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.43 | delta-Thermal-Excusion-Freecoling, sg_alta_in_i | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.44 | hysteresis-Thermal-Excusion-Freecoling, sg_bassa_in_i, d3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.45 | alarm-Setpoint-Static-Pressure-Hydraulic-circuit, d4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.46 | warnig-Setpoint-Static-Pressure-Hydraulic-circuit, d11, vis_temp_def_d | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.47 | alarm-Setpoint-Differential-Pressure-Hydraulic-circuit, vis_temp_3_da | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.48 | alarm-Setpoint-Flow-Rate-Hydraulic-circuit, tar_defrost1 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.49 | tar_defrost2, fan_alrm_dif_a0 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.50 | tempertaure-Cut-off-FCM | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.51 | r28 | 0 | 0 |