OID reference
1.3.6.1.4.1.9839.2.1.2.9
Circuit 2 Evaporating Pressure
Identification
{1 3 6 1 4 1 9839 2 1 2 9}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.2.9.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 20 distinct definitions; some records may not include a definition.
set_inv_dev1 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "°C/°F/bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setpoint selection of the probe 1/valve inverter"
DEFVAL { 25 }
::= { analogObjects 9 }sog_bassa_temp OBJECT-TYPE
SYNTAX Integer32 (-990..32767)
UNITS "bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Low pressure set"
::= { analogObjects 9 }analog_out_1 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Analogue output 1"
::= { analogObjects 9 }v3l OBJECT-TYPE
SYNTAX Integer32 (-2000..32767)
UNITS "bar/… x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Min value of probe 3"
DEFVAL { 0 }
::= { analogObjects 9 }sgl_l_temp OBJECT-TYPE
SYNTAX Integer32 (0..1000)
UNITS "°C x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Low temperature alarm offset"
DEFVAL { 100 }
::= { analogObjects 9 }disch-air-tmp OBJECT-TYPE
SYNTAX Integer32 (-32768..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Temperature of discharge air"
DEFVAL { 0 }
::= { analogObjects 9 }sg_alta_mand OBJECT-TYPE
SYNTAX Integer32 (0..500)
UNITS "bar x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Limit of high delivery pressure"
DEFVAL { 200 }
::= { analogObjects 9 }calibra_b3 OBJECT-TYPE
SYNTAX Integer32 (-120..120)
UNITS "°C/°F x10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Defrosting probe B3 calibration"
DEFVAL { 0 }
::= { analogObjects 9 }sog_bassa_temp OBJECT-TYPE
SYNTAX Integer32 (-990..32767)
UNITS "°C x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Low temperature set"
::= { analogObjects 9 }setpoint_min OBJECT-TYPE
SYNTAX Integer32 (-500..32767)
UNITS "°C/°F x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Miminum setpoint"
DEFVAL { -500 }
::= { analogObjects 9 }voltage_in OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Power supply voltage to the pCO² board"
::= { analogObjects 9 }max-Setpoint-Differential OBJECT-TYPE
SYNTAX Integer32 (-999..999)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Max. Setpoint Differential"
::= { analogObjects 9 }diff_alarm_fan OBJECT-TYPE
SYNTAX Integer32 (1..200)
UNITS "°C/°F x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Differential alarms adn fans"
DEFVAL { 2 }
::= { analogObjects 9 }evapPress2 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "bar"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Circuit 2 Evaporating Pressure"
::= { analogObjects 9 }temp_fine_sbrin OBJECT-TYPE
SYNTAX Integer32 (-500..300)
UNITS "°C x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defrost end temperature"
DEFVAL { 40 }
::= { analogObjects 9 }calibra_s4__9 OBJECT-TYPE
SYNTAX Integer32 (-60..60)
UNITS "°C/°F x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Calibration for elaboration outlet waterprobe at circuit no.2, B4"
DEFVAL { 0 }
::= { analogObjects 9 }aout_1_display OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Speed controller"
::= { analogObjects 9 }diff_alarm_fan OBJECT-TYPE
SYNTAX Integer32 (1..200)
UNITS "°C/°F x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Differential alarms and fans"
DEFVAL { 2 }
::= { analogObjects 9 }defrost_end_temp OBJECT-TYPE
SYNTAX Integer32 (-500..1990)
UNITS "°C/°F x10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "End defrost temperature set point"
DEFVAL { 40 }
::= { analogObjects 9 }t-set-c OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "deg.C x 10"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Heating Set point"
::= { analogObjects 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Setpoint selection of the probe 1/valve inverter
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Low pressure set
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Analogue output 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Min value of probe 3
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Low temperature alarm offset
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Temperature of discharge air
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Limit of high delivery pressure
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
Defrosting probe B3 calibration
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Low temperature set
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 11
Miminum setpoint
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 12
Power supply voltage to the pCO² board
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 13
Max. Setpoint Differential
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 14
Differential alarms adn fans
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 15
Defrost end temperature
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 16
Calibration for elaboration outlet waterprobe at circuit no.2, B4
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 17
Speed controller
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 18
Differential alarms and fans
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 19
End defrost temperature set point
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 20
Heating Set point
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: set_inv_dev1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"set_inv_dev1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462f6261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Setpoint selection of the probe 1/valve inverter\"",
"DEFVAL",
"{",
"25",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"°C/°F/bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Setpoint selection of the probe 1/valve inverter"
],
null,
null,
null,
[
"DEFVAL",
25
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-insgrd-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: sog_bassa_temp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sog_bassa_temp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"990",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"226261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Low pressure set\"",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-990,
32767
]
]
]
],
[
"UNITS",
"bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Low pressure set"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_ap-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: analog_out_1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"analog_out_1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Analogue output 1\"",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Analogue output 1"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mod_ch-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: v3l
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"v3l",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"2000",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"226261722fe280a62078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Min value of probe 3\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-2000,
32767
]
]
]
],
[
"UNITS",
"bar/… x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Min value of probe 3"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mio-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: sgl_l_temp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sgl_l_temp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1000",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Low temperature alarm offset\"",
"DEFVAL",
"{",
"100",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1000
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Low temperature alarm offset"
],
null,
null,
null,
[
"DEFVAL",
100
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: disch-air-tmp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"disch-air-tmp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32768",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Temperature of discharge air\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32768,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Temperature of discharge air"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: sg_alta_mand
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sg_alta_mand",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"500",
")",
"UNITS",
[
"literal",
"226261722078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Limit of high delivery pressure\"",
"DEFVAL",
"{",
"200",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
500
]
]
]
],
[
"UNITS",
"bar x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Limit of high delivery pressure"
],
null,
null,
null,
[
"DEFVAL",
200
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cfp_ncp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: calibra_b3
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"calibra_b3",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"120",
".",
".",
"120",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrosting probe B3 calibration\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-120,
120
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrosting probe B3 calibration"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller_cmp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: sog_bassa_temp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sog_bassa_temp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"990",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Low temperature set\"",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-990,
32767
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Low temperature set"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir32un_t-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: setpoint_min
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"setpoint_min",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"500",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Miminum setpoint\"",
"DEFVAL",
"{",
"-",
"500",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-500,
32767
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Miminum setpoint"
],
null,
null,
null,
[
"DEFVAL",
-500
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: voltage_in
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"voltage_in",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Power supply voltage to the pCO² board\"",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Power supply voltage to the pCO² board"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: max-Setpoint-Differential
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"max-Setpoint-Differential",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"999",
".",
".",
"999",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Max. Setpoint Differential\"",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-999,
999
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Max. Setpoint Differential"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: diff_alarm_fan
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"diff_alarm_fan",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"200",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Differential alarms adn fans\"",
"DEFVAL",
"{",
"2",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
200
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Differential alarms adn fans"
],
null,
null,
null,
[
"DEFVAL",
2
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mcella-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: evapPress2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"evapPress2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"2262617222"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Circuit 2 Evaporating Pressure\"",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"bar"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Circuit 2 Evaporating Pressure"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: CAREL-ug40cdz-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'RFC1213-MIB': ['DisplayString'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Same file in Observium Community.
Status in source: current.
Names: temp_fine_sbrin
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"temp_fine_sbrin",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"500",
".",
".",
"300",
")",
"UNITS",
[
"literal",
"22c2b0432078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Defrost end temperature\"",
"DEFVAL",
"{",
"40",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-500,
300
]
]
]
],
[
"UNITS",
"°C x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Defrost end temperature"
],
null,
null,
null,
[
"DEFVAL",
40
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: calibra_s4__9
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"calibra_s4__9",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"60",
".",
".",
"60",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Calibration for elaboration outlet waterprobe at circuit no.2, B4\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-60,
60
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Calibration for elaboration outlet waterprobe at circuit no.2, B4"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: aout_1_display
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"aout_1_display",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Speed controller\"",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Speed controller"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-screw_compressor-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: diff_alarm_fan
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"diff_alarm_fan",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"200",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Differential alarms and fans\"",
"DEFVAL",
"{",
"2",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
200
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Differential alarms and fans"
],
null,
null,
null,
[
"DEFVAL",
2
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-ir_32-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: defrost_end_temp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"defrost_end_temp",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"500",
".",
".",
"1990",
")",
"UNITS",
[
"literal",
"22c2b0432fc2b0462078313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"End defrost temperature set point\"",
"DEFVAL",
"{",
"40",
"}",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-500,
1990
]
]
]
],
[
"UNITS",
"°C/°F x10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"End defrost temperature set point"
],
null,
null,
null,
[
"DEFVAL",
40
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercellasplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: t-set-c
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"t-set-c",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"226465672e43207820313022"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Heating Set point\"",
"::=",
"{",
"analogObjects",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"deg.C x 10"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Heating Set point"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: UNCDZ-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.2.1 | roomTemp, setpoint-antifreeze1, ret-air-tmp, probeb3_rp, temp-amb, temp_ambiente, asp_conv, calibrazione_sonda_3, probeoffset_3, probe1, ing_sonda_0, probe_circ1, sonda_b1, ain_1, temp_aria_amb, temp, probe_0, h1, sonda_s1 | 0 | 0 | Room Temperature |
| 1.3.6.1.4.1.9839.2.1.2.2 | outdoorTemp, setpoint-antifreeze2, minmax-24hr-retair-maximum, probeb1_rn, temp-ext, temp_evap, press_mand_conv, calibr_sonda_ambiente, probeoffset_1, probe2, ing_sonda_1, probe_circ2, sonda_b2, ain_2, temp_aria_est, umid, probe_1, l1, sonda_s2_r6 | 0 | 0 | Ambient Temperature |
| 1.3.6.1.4.1.9839.2.1.2.3 | deliveryTemp, setpoint-Compensation, minmax-24hr-retair-minumum, probeb2_ro, temp-mand, set_point, set_comp, calibrazione_sonda_defrost, probeoffset_2, thrshitempprobe1, set_point1, setp_air_temp, sonda_b3, ain_3, acqua, probe_cal__c, h2, out_inv_fan, sonda_s3_r7, probe3 | 0 | 0 | Delivery Air Temperature |
| 1.3.6.1.4.1.9839.2.1.2.4 | cwTemp, hysteresis-Compensation, temp-setpoint, probeb4_rr, temp-circ, offset_probe, diff_comp, differenziale_alrm_ventole, fan_alarm_hyst, thrshitempprobe2, set_point2, inverter_fan, ain_4, aria_acqua_in, l2, inverter_comp1, sonda_s4_r8 | 0 | 0 | Chilled Water Temperature |
| 1.3.6.1.4.1.9839.2.1.2.5 | hwTemp, max-Compensation, temp-deadband, real_setp, temp-ac, control_delta, sg_bassa_asp, alrm_alta_temp, alarm_condenser, thrslotempprobe1, differenziale1, inverter_dev1, i_scala_press, ain_5, umid_ambiente, setpoint_valigia, temp_aria_man, h3, alarm_max_delta, set_comp, sonda_s5_r9 | 0 | 0 | Hot Water Temperature |
| 1.3.6.1.4.1.9839.2.1.2.6 | roomRH, setpoint-Differential, humidity-ain-offs, umid-amb, set_point_min, set_vent_off1, alrm_bassa_temp, alarm_condenser_delta, thrslotempprobe2, differenziale2, set_circuit1, f_scala_press, ain_6, umid_esterna, setpoint_poltrona, zona_morta, l3, alarm_min_delta, diff_comp, calibra_s1__6 | 0 | 0 | Room Relative Humidity |
| 1.3.6.1.4.1.9839.2.1.2.7 | cwoTemp, high-Limit, return-ain-offs, t-set, set_point_max, diff_vent, temp_ventole_on, zona_morta, set_c1_mask, calibra_b1, ain_7, setpoint_luna, banda_hum, h4, defrost_end_temp, set_fan, calibra_s2__7, temp_setp_st | 0 | 0 | Chilled Water Outlet Temperature |
| 1.3.6.1.4.1.9839.2.1.2.8 | evapPress1, low-Limit, cw-tmp, t-diff, defrost_end_temperature, sg_alta_asp, set_point_temperatura, offset_sonda, reduced_set, calibra_b2, ain_8, diffheat, set_hum_a, l4, fan_on_temp, diff_fan, calibra_s3__8, probe1_cal__c | 0 | 0 | Circuit 1 Evaporating Pressure |
| 1.3.6.1.4.1.9839.2.1.2.10 | suctTemp1, min-Setpoint-Differential, discharge-ain-offs, t-diff-c, sgl_alarm_min_rel, ins_comp, min_assegnaz_consentita_utente, fan_on_temp, sog_alta_temp, set_inv_fan, setp_estate, analog_out_2, sgl_h_temp, v3h, setpoint_max, max_set_co, calibra_s5__a | 0 | 0 | Circuit 1 Suction Temperature |
| 1.3.6.1.4.1.9839.2.1.2.11 | suctTemp2, setpoint-ASB-Inverter-pumps, cw-ain-offs, sum_setp_r1, ht-set, sgl_alarl_max_rel, dis_comp, max_assegnaz_consentita_utente, fan_on_cond, differenz_all, comp_setp, diff_estate, s_temp_setpoint, sgl_l_umid, v4l, setpoint_night, min_set_co, setp_est_r1 | 0 | 0 | Circuit 2 Suction Temperature |
| 1.3.6.1.4.1.9839.2.1.2.12 | evapTemp1, setpoint-DIFF-Inverter-pumps, engsaver-setpoint, win_setp_r9, lt-set, set_fan_off_rel, variaz_autom_setpoint_notturno, fan_cond_hyst, tempo_di_pwm, set_circuit2, setp_inverno, w_temp_setpoint, sgl_h_umid, v4h, reghyst, max_set_fa, differ_est_r2 | 0 | 0 | Circuit 1 Evap.Temperature |
| 1.3.6.1.4.1.9839.2.1.2.13 | evapTemp2, pressure-Out, opt1-analog, min_setp_t_ra, t-set-sm, delta_set_point, temperatura_rilev_max, setpoint_min, val_minimo_av, diff_circuit1, diff_inverno, cond_setpoint, set_temp_a, o1, max_store_value, min_set_fa, setp_inv_r3 | 0 | 0 | Circuit 2 Evap.Temperature |
| 1.3.6.1.4.1.9839.2.1.2.14 | ssh1, proportional-Band-Inverter-Pumps-PID, opt2-analog, max_setp_t_rb, t-set-c-sm, temperatura_rilev_min, setpoint_max, val_massimo_av, diff_circuit2, min_set_est, in_temp_setp, in_temp_band, o2, min_store_value, thresh_high1, differ_inv_r4 | 0 | 0 | Circuit 1 Superheat |
| 1.3.6.1.4.1.9839.2.1.2.15 | ssh2, integral-Time-Inverter-Pumps-PID, opt3-analog, sum_diff_r2, t-cw-dh, differenziale_regolatore, setpoint_night, set1_min_ok, thresh_low1, max_set_est, set_temp_ariae, o3, setpoint, diff_high1, set_min_est_ra, probe3_cal__8 | 0 | 0 | Circuit 2 Superheat |
| 1.3.6.1.4.1.9839.2.1.2.16 | coolRamp, derivative-Time-Inverter-Pumps-PID, opt4-analog, win_diff_r3, htset-cw, temp_minima_s1, reghyst, set1_max_ok, thresh_low2, min_set_inv, set_temp_ariai, o4, thresh_low1, set_max_est_rb | 0 | 0 | Cooling Valve Ramp |
| 1.3.6.1.4.1.9839.2.1.2.17 | heatRamp, hysteresis-Thermal-redundance, opt-sns-1-y1, n_zone_r4, t-set-cw, max_store_value, set2_min_ok, thresh_high1, max_set_inv, set_umid_est, banda_temp, ds1, diff_low1, set_min_inv_rc, probe2_cal__d | 0 | 0 | Heating Valve Ramp |
| 1.3.6.1.4.1.9839.2.1.2.18 | fanSpeed, min-Opening-3Way-Valve-Hydraulic, opt-sns-1-y2, hum_setp_r5, t-rc-es, tmp_evap_satura, min_store_value, set2_max_ok, thresh_high2, tmin_vel_est_f5, set_umid_inv, sgl_l_free, ds2, set_max_inv_rd | 0 | 0 | Evapor. Fan Speed |
| 1.3.6.1.4.1.9839.2.1.2.19 | opt-sns-1-ain-offs, max-Opening-3Way-Valve-Hydraulic, min_setp_h_rc, t-rc-est, setpoint, autorita, min_setp1, tmax_vel_est_f6, lim_sup_temp, sgl_h_free, ds3, diff_high2, tmin_vel_est_f5, temp_diff_rd | 0 | 0 | Analog Sensor 1 Calibration |
| 1.3.6.1.4.1.9839.2.1.2.20 | coolSetP, proportional-Band-3Way-Valve-Hydrauli-PID, opt-sns-2-y1, max_setp_h_rd, rampa-valv, superheat_set, min_setp2, tmin_vel_inv_f7, lim_inf_temp, ds4, thresh_low2, tmax_vel_est_f6 | 0 | 0 | Cooling Set Point |
| 1.3.6.1.4.1.9839.2.1.2.21 | coolDiff, setpoint-FCM, opt-sns-2-y2, diff_hum_r6, anaout2, k_int, max_setp1, tmax_vel_inv_f8, banda_temp_e, r1, s1, diff_low2, tmin_vel_inv_f7 | 0 | 0 | Cooling Prop.Band |
| 1.3.6.1.4.1.9839.2.1.2.22 | cool2SetP, hysteresis-FCM, opt-sns-2-ain-offs, diff_dehum_r7, steam-production, td_int, max_setp2, toff_fan_est_f9, banda_temp_i, s2, tmax_vel_inv_f8 | 0 | 0 | Cooling 2nd Set Point |
| 1.3.6.1.4.1.9839.2.1.2.23 | heatSetP, max-Out-Speed-FCM, opt-sns-3-y1, n_zone_h_r8, t-set-lm, lim_inf_int, diff_inv_dev1, toff_fan_inv_fa, lim_sup_umid, r8, s3, toff_fan_est_f9, aut_ngt_set_r4 | 0 | 0 | Heating Set point |
| 1.3.6.1.4.1.9839.2.1.2.24 | heat2SetP, min-Out-Speed-FCM, opt-sns-3-y2, authority_rg, delta-lm, offset_sh, diff_inv_fan, parametro_d3, lim_inf_umid, s4, toff_fan_inv_fa | 0 | 0 | Heating 2nd Set point |
| 1.3.6.1.4.1.9839.2.1.2.25 | heatDiff, hysteresis-Cut-off-FCM, opt-sns-3-ain-offs, s_setp_b2_rh, parametro_d4, diff_umid_e, r12, tp_start_def_d3 | 0 | 0 | Heating Prop.Band |
| 1.3.6.1.4.1.9839.2.1.2.26 | thrsHT, max-Pressure-Alarm-FCM, opt-sns-4-y1, w_setp_b2_ri, set_al_agelo_a1, diff_umid_i, r13, probe_1, tp_end_def_d4 | 0 | 0 | High Room Temperature Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.2.27 | thrsLT, hysteresis-Max-Pressure-Alarm-FCM, opt-sns-4-y2, diff_freec_rl, dif_al_agelo_a2, probe_2, set_vent_inv, set_al_agelo_a1, t_max_tm_rt_rh | 0 | 0 | Low Room Temperature Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.2.28 | smCoolSetp, max-Out-FCM, opt-sns-4-ain-offs, min_t_freec_rn, set_res_gelo_a4, offset_fcool, probe_3, diff_vent_inv, dif_al_agelo_a2, t_min_tm_rt_rl | 0 | 0 | Setback Mode: Cooling Setpoint |
| 1.3.6.1.4.1.9839.2.1.2.29 | smHeatSetp, min-Pressure-Alarm-FCM, delta_p6, dif_res_gelo_a5, diff_fcool, probe_virtual, set_res_gelo_a4 | 0 | 0 | Setback Mode: Heating Setpoint |
| 1.3.6.1.4.1.9839.2.1.2.30 | cwDehumSetp, hysteresis-Min-Pressure-Alarm-FCM, delta_p7, probe_1, lim_set_gelo_a7, offset_fheat, r9, power_supply_voltage, dif_res_gelo_a5 | 0 | 0 | CW Setpoint to Start Dehumidification |
| 1.3.6.1.4.1.9839.2.1.2.31 | cwHtThrsh, min-Out-FCM, delta_p8, probe_2, set_res_risc_a8, diff_fheat, r2 | 0 | 0 | CW High Temperature Alarm Threshold |
| 1.3.6.1.4.1.9839.2.1.2.32 | cwModeSetp, delta-Freecooling, delta_p9, dif_res_risc_a9, set_mandata, r4, seinverter | 0 | 0 | CW Setpoint to start CW Operating Mode (Only TC Units) |
| 1.3.6.1.4.1.9839.2.1.2.33 | radcoolSpES, hysteresis-Freecooling, diff_pd, set_all_at_pb, ban_mandata, c5, diff_inv | 0 | 0 | Radcooler Setpoint in Energy Saving Mode |
| 1.3.6.1.4.1.9839.2.1.2.34 | radcoolSpDX, proportional-Band-Freecooling-PID, min_fan_s_f5, sonda_b4, set_esterno, c6 | 0 | 0 | Radcooler Setpoint in DX Mode |
| 1.3.6.1.4.1.9839.2.1.2.35 | delTempLimit, offset-Freecooling-PID, max_fan_s_f6, diff_esterno_e | 0 | 0 | Delivery Temperature Low Limit Setpoint |
| 1.3.6.1.4.1.9839.2.1.2.36 | dtAutChgMLT, temperature-Overlap-Freecooling, probeconvl, max_comp_e | 0 | 0 | Delta Temperature for Automatic Mean/Local Changeover |
| 1.3.6.1.4.1.9839.2.1.2.37 | min-out-freecooling, probeconvh, set_min, f3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.38 | neutral-zone-K-costant, calibrazione_sonda_b1, set_stop, c7 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.39 | neutral-zone-V-variable, calibrazione_sonda_b2, zona_morta, f4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.40 | proportional-Band-freecooling-Valve-PID, calibrazione_sonda_b3, zona_morta_u, p3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.41 | offset-Freecooling-Valve-PID, calibrazione_sonda_b4, sg_alta_in_e, p4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.42 | temperature-A-B, sg_bassa_in_e | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.43 | delta-Thermal-Excusion-Freecoling, sg_alta_in_i | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.44 | hysteresis-Thermal-Excusion-Freecoling, sg_bassa_in_i, d3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.45 | alarm-Setpoint-Static-Pressure-Hydraulic-circuit, d4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.46 | warnig-Setpoint-Static-Pressure-Hydraulic-circuit, d11, vis_temp_def_d | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.47 | alarm-Setpoint-Differential-Pressure-Hydraulic-circuit, vis_temp_3_da | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.48 | alarm-Setpoint-Flow-Rate-Hydraulic-circuit, tar_defrost1 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.49 | tar_defrost2, fan_alrm_dif_a0 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.50 | tempertaure-Cut-off-FCM | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.2.51 | r28 | 0 | 0 |