Objects in TIMETRA-PORT-MIB

OID records

OIDNameDescription
1.3.6.1.4.1.6527.3.1.2.2.4.14.1.14tmnxBundleShortSequencetmnxBundleShortSequence command specifies that the MLPPP bundle
should use short (12 bit) sequence numbers. Instead of the
standard long (24 bits) sequence numbe…
1.3.6.1.4.1.6527.3.1.2.2.4.2.1.46tmnxPortSFPVendorPartNumThe vendor part number contains ASCII characters,
defining the vendor part number or product name.
A value of all zero indicates that the vendor PN
is unspecified.
1.3.6.1.4.1.6527.3.1.2.2.4.22.1.17tmnxBundleMemberImaFeRxUnuseSecstmnxBundleMemberImaFeRxUnuseSecs indicates the number
of unavailable seconds at the far-end receive link
state machine.
1.3.6.1.4.1.6527.3.1.1.2.2.1.4.2tmnxPortComp7450V4v0The compliance statement for revision 4.0 of TIMETRA-PORT-MIB on
the Alcatel 7450 SR series systems.
1.3.6.1.4.1.6527.3.1.2.2.4.4.1tmnxPortEtherEntryEach row entry represents an Ethernet port on a IOM card in a
chassis in the system. Entries cannot be created and
deleted via SNMP SET operations. Before an I…
1.3.6.1.4.1.6527.3.1.2.2.4.14.1.19tmnxBundlePrimaryMemberPortIDtmnxBundlePrimaryMemberPortID indicates the TmnxPortID of the primary
member of this bundle. The value of this object will be zero if
there are no members config…
1.3.6.1.4.1.6527.3.1.2.2.4.2.1.17tmnxPortConnectorTypeThe type of connector installed on this port.
1.3.6.1.4.1.6527.3.1.3.2.2.0.21tmnxEqPortBndlBadEndPtDiscrGenerated when the port detected mismatched peer endpoint
discriminator for the bundle.
1.3.6.1.4.1.6527.3.1.2.2.4.11.1tmnxDS3ChannelEntryEach row entry represents a DS3 channel. Entries can be created
and deleted via SNMP SET operations. The tmnxDS3ChannelEntry
contains attributes that are applic…
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10tmnxDS0ChanGroupAcctPolicyIdThe value of tmnxDS0ChanGroupAcctPolicyId specifies an existing accounting
policy to use for the ds0 channel-group. Accounting policies can only
be associated wi…
1.3.6.1.4.1.6527.3.1.2.2.7.5tmnxPortNotifyDS3AlarmReasonUsed by tmnx DS3 Port Notifications, the value of
tmnxPortNotifyDS3AlarmReason indicates the reason a DS3 interface
alarm has been raised.
1.3.6.1.4.1.6527.3.1.2.2.4.4.1.3tmnxPortEtherSpeedThe tmnxPortEtherSpeed variable specifies the link speed of the
Ethernet interface if tmnxPortEtherAutoNegotiate has a value of
'false' or 'limited'. If tmnxPor…
1.3.6.1.4.1.6527.3.1.2.2.4.17.1.13tmnxPortIngrMdaQos06StatDropPktstmnxPortIngrMdaQos06StatDropPkts indicates the number of
packets dropped on the oversubscribed MDA for given Qos
classifier result because of an overload conditi…
1.3.6.1.4.1.6527.3.1.2.2.4.14.1.16tmnxBundleFragmentThresholdThe value of tmnxBundleFragmentThreshold specifies the maximum length
of a fragment transmitted across the multilink bundle. Values supported
within each bundle …
1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10tmnxDS3ChannelBitErrorInsertionRatetmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a
BERT test. The number of error corresponds to 10^(-rate). A rate of 7
will cause an error …
1.3.6.1.4.1.6527.3.1.2.2.4.18.1.4tmnxSonetGroupNametmnxSonetGroupName is the textual name for this sonet group.
1.3.6.1.4.1.6527.3.1.3.2.2.0.34tmnxEqPortIngressRateCfgNotCompatibleGenerated when a supported MDA is inserted into a slot of an
IOM, the MDA is compatible with the currently provisioned MDA,
but the currently configured ingress …
1.3.6.1.4.1.6527.3.1.2.2.7.3tmnxPortNotifySonetPathAlarmReasonUsed by tmnx sonet path Notifications, the value of
tmnxPortNotifySonetPathAlarmReason indicates the reason a sonet path
alarm has been raised.
1.3.6.1.4.1.6527.3.1.2.2.4.2.1.27tmnxPortTransceiverLaserWaveLenThe light wavelength transmitted by the transceiver's laser.
A value of zero indicates that the port is not equipped with
the transceiver.
1.3.6.1.4.1.6527.3.1.2.2.4.24.1tmnxPortSchedOverrideEntryEach row represents a particular port-scheduler override. Entries
are created and deleted by the user.
1.3.6.1.4.1.6527.3.1.2.2.4.14.1.10tmnxBundleOperMTUtmnxBundleOperMTU indicates the operational MTU of the bundle.
1.3.6.1.4.1.6527.3.1.2.2.4.21.1.24tmnxBundleImaGrpBetaValuetmnxBundleImaGrpBetaValue specifies the number of
consecutive errored ICP cells that need to be detected
before moving from the IMA Sync State to the IMA Hunt
Sta…
1.3.6.1.4.1.6527.3.1.2.2.9.1tmnxFRDlcmiTableThe tmnxFRDlcmiTable has an entry for each port in the
system that is configured for Frame Relay. It contains
the parameters for the Data Link Connection Managem…
1.3.6.1.4.1.6527.3.1.1.2.2.2.54tmnxPortGroupV6v0The group of objects supporting management of physical port
capabilities for revision 6.0 on Alcatel 7x50 SR series systems.
1.3.6.1.4.1.6527.3.1.2.2.4.15.1.1tmnxBundleMemberRowStatustmnxBundleMemberRowStatus controls the creation and deletion of
row entries in the tmnxBundleMemberTable.
tmnxPortPortID identifies the port to be associated wit…
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.15tmnxDS0ChanGroupSignalPatternThe value of tmnxDS0ChanGroupSignalPattern specifies the idle signal
fill pattern when the CAS CEM channel group experiences an underrun
and tmnxDS0ChanGroupSign…
1.3.6.1.4.1.6527.3.1.2.2.4.4.1.4tmnxPortEtherAutoNegotiateWhen the value of tmnxPortEtherAutoNegotiate is 'true', the Ethernet
interface will automatically negotiate link parameters with the far
end (including speed and…
1.3.6.1.4.1.6527.3.1.2.2.4.14.1.7tmnxBundleMRRUtmnxBundleMRRU is used to configure the
Max Received Reconstructed Unit (MRRU). This is the maximum frame that
can be reconstructed from multilink fragments.
This…
1.3.6.1.4.1.6527.3.1.2.2.4.8.1tmnxPortConnectTypeEntryEach row entry represents an Alcatel 7x50 SR series port
Connector model. Rows in this table are created by the agent
at initialization and cannot be created or…
1.3.6.1.4.1.6527.3.1.2.2.4.2.1.12tmnxPortEncapTypeThe type of encapsulation protocol configured on this
port's network interface. If tmnxPortEncapType has a value
of 'nullEncap', frames received will not carry …
1.3.6.1.4.1.6527.3.1.2.2.4.22.1.18tmnxBundleMemberImaNeTxNumFailstmnxBundleMemberImaNeTxNumFails indicates the number
of times that a near-end transmit alarm is set on the
IMA link.
1.3.6.1.4.1.6527.3.1.2.2.4.14.1.2tmnxBundleRowStatustmnxBundleRowStatus controls the creation and deletion of
row entries in the tmnxBundleTable.

The manager has to first calculate the tmnxBundleBundleID
based on t…
1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2tmnxDS0ChanGroupTimeSlotstmnxDS0ChanGroupTimeSlots is a bitmap which is used to
add/remove DS0 timeslots from a channel group.
The description for TmnxDs0ChannelList contains details of …
1.3.6.1.4.1.6527.3.1.2.2.4.9.1tmnxPortFCStatsEntryEach row entry represents a set of ingress and egress packet and
octet statistics for the given network port and forwarding class.
Rows in this table are created…
1.3.6.1.4.1.6527.3.1.2.2.12.3tmnxCiscoHDLCStatsTableThe tmnxCiscoHDLCStatsTable has an entry for each port in the
system that is configured for Cisco HDLC encapsulation. It contains
Cisco HDLC protocol statistics …
1.3.6.1.4.1.6527.3.1.2.2.4.6.1.14tmnxSonetPathMonC2ByteThe tmnxSonetPathC2Byte variable reports the value in the SONET/SDH
C2 header byte.
1.3.6.1.4.1.6527.3.1.2.2.4.2.1.61tmnxPortEgrNamedPoolPlcyThe value of tmnxPortEgrNamedPoolPlcy specifies a named pool
policy associated with an port egress context. The policy
governs the way named pools are created at…
1.3.6.1.4.1.6527.3.1.2.2.4.12.1tmnxDS1EntryEach row entry represents a DS1 channel on a IOM card
in a chassis in the system. DS1 channel entries for DS3
ports cannot be created and deleted via SNMP SET o…
1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7tmnxDS1BitErrorInsertionRatetmnxDS1BitErrorInsertionRate is used to insert bit errors for a
BERT test. The number of error corresponds to 10^(-rate). A rate of 7
will cause an error rate of…
1.3.6.1.4.1.6527.3.1.1.2.2.2.53tmnxDigitalDiagMonitorGroupThe group of objects supporting the management of
Digital Diagnostic Monitoring SFP/XFPs for revision 6.0 on
Alcatel 7x50 SR series systems.
1.3.6.1.4.1.6527.3.1.1.2.2.2.11tmnxPortObsoleteGroupThe group of objects in TIMETRA-PORT-MIB which are obsoleted.
1.3.6.1.4.1.6527.3.1.2.2.4.8tmnxPortConnectTypeTableThe Port Connector type table has an entry for each Alcatel
7x50 SR series port connector model.
1.3.6.1.4.1.6527.3.1.2.2.4.2.1.57tmnxPortEgrPortSchedPlcyThe value of tmnxPortEgrPortSchedPlcy specifies the egress QoS
port-scheduler policy for this port. This object must correspond
to the index of a row in TIMETRA-…
1.3.6.1.4.1.6527.3.1.2.2.4.15.1.4tmnxBundleMemberUpTimetmnxBundleMemberUpTime indicates the time since the bundle member is
active as indicated by tmnxBundleMemberActive.
1.3.6.1.4.1.6527.3.1.1.2.2.2.28tmnxObsoleteGroupV3v0The group of objects obsoleted in the 7x50 SR series 3.0 release
1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4tmnxSonetReportAlarmThe value of tmnxSonetReportAlarm determines when and if to
generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear
notifications for this port:
loc(1) R…
1.3.6.1.4.1.6527.3.1.2.2.4.26.1tmnxBundleMlpppEntryEach row entry contains data on an MLPPP Bundle.
1.3.6.1.4.1.6527.3.1.2.2.4.31.1.50tmnxDDMExtCalTemperatureSlopeThe value of tmnxDDMExtCalTemperatureSlope indicates the
T(Slope) value as specified in Table 3.16 in the SFF
Committee Standard's document SFF-8472 Rev 10.2.
1.3.6.1.4.1.6527.3.1.2.2.4.10.1tmnxDS3EntryEach row entry represents a physical DS3 port on a
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries …
1.3.6.1.4.1.6527.3.1.2.2.4.4.1.17tmnxPortEtherPkts1519toMaxThe total number of packets received that were longer than 1518 octets
but less than the maximum frame size for the particular medium, usually
12287 octets (excl…