An entry in this table in association with the corresponding
entry in the mplsTunnelTable represents a GMPLS tunnel.
An entry can be created by a network administrator via SNMP SET
commands, or in response to signaling protocol events.
Parsed from file rfc4802-GMPLS-TE.mib-2.txt
Company: None
Module: GMPLS-TE-STD-MIB
An entry in this table in association with the corresponding
entry in the mplsTunnelTable represents a GMPLS tunnel.
An entry can be created by a network administrator via SNMP SET
commands, or in response to signaling protocol events.
Parsed from file GMPLS-TE-STD-MIB.mib
Module: GMPLS-TE-STD-MIB
Vendor: IETF RFCs
Module: GMPLS-TE-STD-MIB (rfc4802-GMPLS-TE.mib-2)
Type: ENTRY
Access: not-accessible
Syntax: GmplsTunnelEntry
Automatically extracted from www.mibdepot.com
gmplsTunnelEntry OBJECT-TYPE SYNTAX GmplsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table in association with the corresponding entry in the mplsTunnelTable represents a GMPLS tunnel. An entry can be created by a network administrator via SNMP SET commands, or in response to signaling protocol events." INDEX { mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, mplsTunnelEgressLSRId } ::= { gmplsTunnelTable 1 }
gmplsTunnelEntry OBJECT-TYPE SYNTAX GmplsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table in association with the corresponding entry in the mplsTunnelTable represents a GMPLS tunnel. An entry can be created by a network administrator via SNMP SET commands, or in response to signaling protocol events." INDEX { mplsTunnelIndex, mplsTunnelInstance, mplsTunnelIngressLSRId, mplsTunnelEgressLSRId } ::= { gmplsTunnelTable 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.13.2.1.1.1 | gmplsTunnelUnnumIf | 0 | 0 | Denotes whether or not this tunnel corresponds to an unnumbered interface represented by an entry in the interfaces group table (… |
| 1.3.6.1.2.1.10.166.13.2.1.1.2 | gmplsTunnelAttributes | 0 | 0 | This bitmask indicates optional parameters for this tunnel. These bits should be taken in addition to those defined in mplsTunnel… |
| 1.3.6.1.2.1.10.166.13.2.1.1.3 | gmplsTunnelLSPEncoding | 0 | 0 | This object indicates the encoding of the LSP being requested. A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is n… |
| 1.3.6.1.2.1.10.166.13.2.1.1.4 | gmplsTunnelSwitchingType | 0 | 0 | Indicates the type of switching that should be performed on a particular link. This field is needed for links that advertise mor… |
| 1.3.6.1.2.1.10.166.13.2.1.1.5 | gmplsTunnelLinkProtection | 0 | 0 | This bitmask indicates the level of link protection required. A value of zero (no bits set) indicates that any protection may b… |
| 1.3.6.1.2.1.10.166.13.2.1.1.6 | gmplsTunnelGPid | 0 | 0 | This object indicates the payload carried by the LSP. It is only required when GMPLS will be used for this LSP. The values to us… |
| 1.3.6.1.2.1.10.166.13.2.1.1.7 | gmplsTunnelSecondary | 0 | 0 | Indicates that the requested LSP is a secondary LSP. This object is only meaningful if gmplsTunnelLSPEncoding is not set to 'tunn… |
| 1.3.6.1.2.1.10.166.13.2.1.1.8 | gmplsTunnelDirection | 0 | 0 | Whether this tunnel carries forward data only (is unidirectional) or is bidirectional. Values of this object other than 'forward'… |
| 1.3.6.1.2.1.10.166.13.2.1.1.9 | gmplsTunnelPathComp | 0 | 0 | This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries… |
| 1.3.6.1.2.1.10.166.13.2.1.1.10 | gmplsTunnelUpstreamNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelUpstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.11 | gmplsTunnelUpstreamNotifyRecipient | 0 | 0 | Indicates the address of the upstream recipient for Notify messages relating to this tunnel and issued by this LSR. This informa… |
| 1.3.6.1.2.1.10.166.13.2.1.1.12 | gmplsTunnelSendResvNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelSendResvNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.13 | gmplsTunnelSendResvNotifyRecipient | 0 | 0 | Indicates to an upstream LSR the address to which it should send downstream Notify messages relating to this tunnel. This object … |
| 1.3.6.1.2.1.10.166.13.2.1.1.14 | gmplsTunnelDownstreamNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelDownstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.15 | gmplsTunnelDownstreamNotifyRecipient | 0 | 0 | Indicates the address of the downstream recipient for Notify messages relating to this tunnel and issued by this LSR. This infor… |
| 1.3.6.1.2.1.10.166.13.2.1.1.16 | gmplsTunnelSendPathNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelSendPathNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.17 | gmplsTunnelSendPathNotifyRecipient | 0 | 0 | Indicates to a downstream LSR the address to which it should send upstream Notify messages relating to this tunnel. This object i… |
| 1.3.6.1.2.1.10.166.13.2.1.1.18 | gmplsTunnelAdminStatusFlags | 0 | 0 | Determines the setting of the Admin Status flags in the Admin Status object or TLV, as described in RFC 3471. Setting this field… |
| 1.3.6.1.2.1.10.166.13.2.1.1.19 | gmplsTunnelExtraParamsPtr | 0 | 0 | Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, Synchrono… |