Indicates to a downstream LSR the address to which it should
send upstream Notify messages relating to this tunnel.
This object is only valid when signaling a tunnel using RSVP.
It is also not valid at the tail end of the tunnel since no Path
messages are sent from that LSR for this tunnel.
If set to 0, no Notify Request object will be included in the
outgoing Path messages.
This object is interpreted in the context of the value of
gmplsTunnelSendPathNotifyRecipientType. If this object is set to
0, the value of gmplsTunnelSendPathNotifyRecipientType MUST be
set to unknown(0).
Parsed from file rfc4802-GMPLS-TE.mib-2.txt
Company: None
Module: GMPLS-TE-STD-MIB
Indicates to a downstream LSR the address to which it should
send upstream Notify messages relating to this tunnel.
This object is only valid when signaling a tunnel using RSVP.
It is also not valid at the tail end of the tunnel since no Path
messages are sent from that LSR for this tunnel.
If set to 0, no Notify Request object will be included in the
outgoing Path messages.
This object is interpreted in the context of the value of
gmplsTunnelSendPathNotifyRecipientType. If this object is set to
0, the value of gmplsTunnelSendPathNotifyRecipientType MUST be
set to unknown(0).
Parsed from file GMPLS-TE-STD-MIB.mib
Module: GMPLS-TE-STD-MIB
Vendor: IETF RFCs
Module: GMPLS-TE-STD-MIB (rfc4802-GMPLS-TE.mib-2)
Type: TABULAR
Access: read-create
Syntax: InetAddress
Automatically extracted from www.mibdepot.com
gmplsTunnelSendPathNotifyRecipient OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates to a downstream LSR the address to which it should send upstream Notify messages relating to this tunnel. This object is only valid when signaling a tunnel using RSVP. It is also not valid at the tail end of the tunnel since no Path messages are sent from that LSR for this tunnel. If set to 0, no Notify Request object will be included in the outgoing Path messages. This object is interpreted in the context of the value of gmplsTunnelSendPathNotifyRecipientType. If this object is set to 0, the value of gmplsTunnelSendPathNotifyRecipientType MUST be set to unknown(0)." REFERENCE "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473, section 4.2. " DEFVAL { '00000000'H } ::= { gmplsTunnelEntry 17 }
gmplsTunnelSendPathNotifyRecipient OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates to a downstream LSR the address to which it should send upstream Notify messages relating to this tunnel. This object is only valid when signaling a tunnel using RSVP. It is also not valid at the tail end of the tunnel since no Path messages are sent from that LSR for this tunnel. If set to 0, no Notify Request object will be included in the outgoing Path messages. This object is interpreted in the context of the value of gmplsTunnelSendPathNotifyRecipientType. If this object is set to 0, the value of gmplsTunnelSendPathNotifyRecipientType MUST be set to unknown(0)." REFERENCE "1. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473, section 4.2. " DEFVAL { '00000000'H } ::= { gmplsTunnelEntry 17 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.13.2.1.1.1 | gmplsTunnelUnnumIf | 0 | 0 | Denotes whether or not this tunnel corresponds to an unnumbered interface represented by an entry in the interfaces group table (… |
| 1.3.6.1.2.1.10.166.13.2.1.1.2 | gmplsTunnelAttributes | 0 | 0 | This bitmask indicates optional parameters for this tunnel. These bits should be taken in addition to those defined in mplsTunnel… |
| 1.3.6.1.2.1.10.166.13.2.1.1.3 | gmplsTunnelLSPEncoding | 0 | 0 | This object indicates the encoding of the LSP being requested. A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is n… |
| 1.3.6.1.2.1.10.166.13.2.1.1.4 | gmplsTunnelSwitchingType | 0 | 0 | Indicates the type of switching that should be performed on a particular link. This field is needed for links that advertise mor… |
| 1.3.6.1.2.1.10.166.13.2.1.1.5 | gmplsTunnelLinkProtection | 0 | 0 | This bitmask indicates the level of link protection required. A value of zero (no bits set) indicates that any protection may b… |
| 1.3.6.1.2.1.10.166.13.2.1.1.6 | gmplsTunnelGPid | 0 | 0 | This object indicates the payload carried by the LSP. It is only required when GMPLS will be used for this LSP. The values to us… |
| 1.3.6.1.2.1.10.166.13.2.1.1.7 | gmplsTunnelSecondary | 0 | 0 | Indicates that the requested LSP is a secondary LSP. This object is only meaningful if gmplsTunnelLSPEncoding is not set to 'tunn… |
| 1.3.6.1.2.1.10.166.13.2.1.1.8 | gmplsTunnelDirection | 0 | 0 | Whether this tunnel carries forward data only (is unidirectional) or is bidirectional. Values of this object other than 'forward'… |
| 1.3.6.1.2.1.10.166.13.2.1.1.9 | gmplsTunnelPathComp | 0 | 0 | This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries… |
| 1.3.6.1.2.1.10.166.13.2.1.1.10 | gmplsTunnelUpstreamNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelUpstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.11 | gmplsTunnelUpstreamNotifyRecipient | 0 | 0 | Indicates the address of the upstream recipient for Notify messages relating to this tunnel and issued by this LSR. This informa… |
| 1.3.6.1.2.1.10.166.13.2.1.1.12 | gmplsTunnelSendResvNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelSendResvNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.13 | gmplsTunnelSendResvNotifyRecipient | 0 | 0 | Indicates to an upstream LSR the address to which it should send downstream Notify messages relating to this tunnel. This object … |
| 1.3.6.1.2.1.10.166.13.2.1.1.14 | gmplsTunnelDownstreamNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelDownstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.15 | gmplsTunnelDownstreamNotifyRecipient | 0 | 0 | Indicates the address of the downstream recipient for Notify messages relating to this tunnel and issued by this LSR. This infor… |
| 1.3.6.1.2.1.10.166.13.2.1.1.16 | gmplsTunnelSendPathNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelSendPathNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.18 | gmplsTunnelAdminStatusFlags | 0 | 0 | Determines the setting of the Admin Status flags in the Admin Status object or TLV, as described in RFC 3471. Setting this field… |
| 1.3.6.1.2.1.10.166.13.2.1.1.19 | gmplsTunnelExtraParamsPtr | 0 | 0 | Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, Synchrono… |