This value instructs the source node on how to perform path
computation on the explicit route specified by the associated
entries in the gmplsTunnelHopTable.
dynamicFull
The user specifies at least the source and
destination of the path and expects that the Constrained
Shortest Path First (CSPF) will calculate the remainder
of the path.
explicit
The user specifies the entire path for the tunnel to
take. This path may contain strict or loose hops.
Evaluation of the explicit route will be performed
hop by hop through the network.
dynamicPartial
The user specifies at least the source and
destination of the path and expects that the CSPF
will calculate the remainder of the path. The path
computed by CSPF is allowed to be only partially
computed allowing the remainder of the path to be
filled in across the network.
When an entry is present in the gmplsTunnelTable for a
tunnel, gmplsTunnelPathComp MUST be used and any
corresponding mplsTunnelHopEntryPathComp object in the
mplsTunnelHopTable MUST be ignored and SHOULD not be set.
mplsTunnelHopTable and mplsTunnelHopEntryPathComp are part of
MPLS-TE-STD-MIB.
This object should be ignored if the value of
gmplsTunnelLSPEncoding is 'tunnelLspNotGmpls'.
Parsed from file rfc4802-GMPLS-TE.mib-2.txt
Company: None
Module: GMPLS-TE-STD-MIB
This value instructs the source node on how to perform path
computation on the explicit route specified by the associated
entries in the gmplsTunnelHopTable.
dynamicFull
The user specifies at least the source and
destination of the path and expects that the Constrained
Shortest Path First (CSPF) will calculate the remainder
of the path.
explicit
The user specifies the entire path for the tunnel to
take. This path may contain strict or loose hops.
Evaluation of the explicit route will be performed
hop by hop through the network.
dynamicPartial
The user specifies at least the source and
destination of the path and expects that the CSPF
will calculate the remainder of the path. The path
computed by CSPF is allowed to be only partially
computed allowing the remainder of the path to be
filled in across the network.
When an entry is present in the gmplsTunnelTable for a
tunnel, gmplsTunnelPathComp MUST be used and any
corresponding mplsTunnelHopEntryPathComp object in the
mplsTunnelHopTable MUST be ignored and SHOULD not be set.
mplsTunnelHopTable and mplsTunnelHopEntryPathComp are part of
MPLS-TE-STD-MIB.
This object should be ignored if the value of
gmplsTunnelLSPEncoding is 'tunnelLspNotGmpls'.
Parsed from file GMPLS-TE-STD-MIB.mib
Module: GMPLS-TE-STD-MIB
Vendor: IETF RFCs
Module: GMPLS-TE-STD-MIB (rfc4802-GMPLS-TE.mib-2)
Type: TABULAR
Access: read-create
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
gmplsTunnelPathComp OBJECT-TYPE SYNTAX INTEGER { dynamicFull(1), explicit(2), dynamicPartial(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries in the gmplsTunnelHopTable. dynamicFull The user specifies at least the source and destination of the path and expects that the Constrained Shortest Path First (CSPF) will calculate the remainder of the path. explicit The user specifies the entire path for the tunnel to take. This path may contain strict or loose hops. Evaluation of the explicit route will be performed hop by hop through the network. dynamicPartial The user specifies at least the source and destination of the path and expects that the CSPF will calculate the remainder of the path. The path computed by CSPF is allowed to be only partially computed allowing the remainder of the path to be filled in across the network. When an entry is present in the gmplsTunnelTable for a tunnel, gmplsTunnelPathComp MUST be used and any corresponding mplsTunnelHopEntryPathComp object in the mplsTunnelHopTable MUST be ignored and SHOULD not be set. mplsTunnelHopTable and mplsTunnelHopEntryPathComp are part of MPLS-TE-STD-MIB. This object should be ignored if the value of gmplsTunnelLSPEncoding is 'tunnelLspNotGmpls'." REFERENCE "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE) Management Information Base (MIB), RFC 3812." DEFVAL { dynamicFull } ::= { gmplsTunnelEntry 9 }
gmplsTunnelPathComp OBJECT-TYPE SYNTAX INTEGER { dynamicFull(1), explicit(2), dynamicPartial(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries in the gmplsTunnelHopTable. dynamicFull The user specifies at least the source and destination of the path and expects that the Constrained Shortest Path First (CSPF) will calculate the remainder of the path. explicit The user specifies the entire path for the tunnel to take. This path may contain strict or loose hops. Evaluation of the explicit route will be performed hop by hop through the network. dynamicPartial The user specifies at least the source and destination of the path and expects that the CSPF will calculate the remainder of the path. The path computed by CSPF is allowed to be only partially computed allowing the remainder of the path to be filled in across the network. When an entry is present in the gmplsTunnelTable for a tunnel, gmplsTunnelPathComp MUST be used and any corresponding mplsTunnelHopEntryPathComp object in the mplsTunnelHopTable MUST be ignored and SHOULD not be set. mplsTunnelHopTable and mplsTunnelHopEntryPathComp are part of MPLS-TE-STD-MIB. This object should be ignored if the value of gmplsTunnelLSPEncoding is 'tunnelLspNotGmpls'." REFERENCE "1. Multiprotocol Label Switching (MPLS) Traffic Engineering (TE) Management Information Base (MIB), RFC 3812." DEFVAL { dynamicFull } ::= { gmplsTunnelEntry 9 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.13.2.1.1.1 | gmplsTunnelUnnumIf | 0 | 0 | Denotes whether or not this tunnel corresponds to an unnumbered interface represented by an entry in the interfaces group table (… |
| 1.3.6.1.2.1.10.166.13.2.1.1.2 | gmplsTunnelAttributes | 0 | 0 | This bitmask indicates optional parameters for this tunnel. These bits should be taken in addition to those defined in mplsTunnel… |
| 1.3.6.1.2.1.10.166.13.2.1.1.3 | gmplsTunnelLSPEncoding | 0 | 0 | This object indicates the encoding of the LSP being requested. A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is n… |
| 1.3.6.1.2.1.10.166.13.2.1.1.4 | gmplsTunnelSwitchingType | 0 | 0 | Indicates the type of switching that should be performed on a particular link. This field is needed for links that advertise mor… |
| 1.3.6.1.2.1.10.166.13.2.1.1.5 | gmplsTunnelLinkProtection | 0 | 0 | This bitmask indicates the level of link protection required. A value of zero (no bits set) indicates that any protection may b… |
| 1.3.6.1.2.1.10.166.13.2.1.1.6 | gmplsTunnelGPid | 0 | 0 | This object indicates the payload carried by the LSP. It is only required when GMPLS will be used for this LSP. The values to us… |
| 1.3.6.1.2.1.10.166.13.2.1.1.7 | gmplsTunnelSecondary | 0 | 0 | Indicates that the requested LSP is a secondary LSP. This object is only meaningful if gmplsTunnelLSPEncoding is not set to 'tunn… |
| 1.3.6.1.2.1.10.166.13.2.1.1.8 | gmplsTunnelDirection | 0 | 0 | Whether this tunnel carries forward data only (is unidirectional) or is bidirectional. Values of this object other than 'forward'… |
| 1.3.6.1.2.1.10.166.13.2.1.1.10 | gmplsTunnelUpstreamNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelUpstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.11 | gmplsTunnelUpstreamNotifyRecipient | 0 | 0 | Indicates the address of the upstream recipient for Notify messages relating to this tunnel and issued by this LSR. This informa… |
| 1.3.6.1.2.1.10.166.13.2.1.1.12 | gmplsTunnelSendResvNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelSendResvNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.13 | gmplsTunnelSendResvNotifyRecipient | 0 | 0 | Indicates to an upstream LSR the address to which it should send downstream Notify messages relating to this tunnel. This object … |
| 1.3.6.1.2.1.10.166.13.2.1.1.14 | gmplsTunnelDownstreamNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelDownstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.15 | gmplsTunnelDownstreamNotifyRecipient | 0 | 0 | Indicates the address of the downstream recipient for Notify messages relating to this tunnel and issued by this LSR. This infor… |
| 1.3.6.1.2.1.10.166.13.2.1.1.16 | gmplsTunnelSendPathNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelSendPathNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.17 | gmplsTunnelSendPathNotifyRecipient | 0 | 0 | Indicates to a downstream LSR the address to which it should send upstream Notify messages relating to this tunnel. This object i… |
| 1.3.6.1.2.1.10.166.13.2.1.1.18 | gmplsTunnelAdminStatusFlags | 0 | 0 | Determines the setting of the Admin Status flags in the Admin Status object or TLV, as described in RFC 3471. Setting this field… |
| 1.3.6.1.2.1.10.166.13.2.1.1.19 | gmplsTunnelExtraParamsPtr | 0 | 0 | Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, Synchrono… |