This bitmask indicates optional parameters for this tunnel.
These bits should be taken in addition to those defined in
mplsTunnelSessionAttributes in order to determine the full set
of options to be signaled (for example SESSION_ATTRIBUTES flags
in RSVP-TE). The following describes these bitfields:
labelRecordingDesired
This flag is set to indicate that label information should be
included when doing a route record. This bit is not valid
unless the recordRoute bit is set.
Parsed from file rfc4802-GMPLS-TE.mib-2.txt
Company: None
Module: GMPLS-TE-STD-MIB
This bitmask indicates optional parameters for this tunnel.
These bits should be taken in addition to those defined in
mplsTunnelSessionAttributes in order to determine the full set
of options to be signaled (for example SESSION_ATTRIBUTES flags
in RSVP-TE). The following describes these bitfields:
labelRecordingDesired
This flag is set to indicate that label information should be
included when doing a route record. This bit is not valid
unless the recordRoute bit is set.
Parsed from file GMPLS-TE-STD-MIB.mib
Module: GMPLS-TE-STD-MIB
Vendor: IETF RFCs
Module: GMPLS-TE-STD-MIB (rfc4802-GMPLS-TE.mib-2)
Type: TABULAR
Access: read-create
Syntax: BITS
Automatically extracted from www.mibdepot.com
gmplsTunnelAttributes OBJECT-TYPE SYNTAX BITS { labelRecordingDesired(0) } MAX-ACCESS read-create STATUS current DESCRIPTION "This bitmask indicates optional parameters for this tunnel. These bits should be taken in addition to those defined in mplsTunnelSessionAttributes in order to determine the full set of options to be signaled (for example SESSION_ATTRIBUTES flags in RSVP-TE). The following describes these bitfields: labelRecordingDesired This flag is set to indicate that label information should be included when doing a route record. This bit is not valid unless the recordRoute bit is set." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209, sections 4.4.3, 4.7.1, and 4.7.2." DEFVAL { { } } ::= { gmplsTunnelEntry 2 }
gmplsTunnelAttributes OBJECT-TYPE SYNTAX BITS { labelRecordingDesired(0) } MAX-ACCESS read-create STATUS current DESCRIPTION "This bitmask indicates optional parameters for this tunnel. These bits should be taken in addition to those defined in mplsTunnelSessionAttributes in order to determine the full set of options to be signaled (for example SESSION_ATTRIBUTES flags in RSVP-TE). The following describes these bitfields: labelRecordingDesired This flag is set to indicate that label information should be included when doing a route record. This bit is not valid unless the recordRoute bit is set." REFERENCE "1. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209, sections 4.4.3, 4.7.1, and 4.7.2." DEFVAL { { } } ::= { gmplsTunnelEntry 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.13.2.1.1.1 | gmplsTunnelUnnumIf | 0 | 0 | Denotes whether or not this tunnel corresponds to an unnumbered interface represented by an entry in the interfaces group table (… |
| 1.3.6.1.2.1.10.166.13.2.1.1.3 | gmplsTunnelLSPEncoding | 0 | 0 | This object indicates the encoding of the LSP being requested. A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is n… |
| 1.3.6.1.2.1.10.166.13.2.1.1.4 | gmplsTunnelSwitchingType | 0 | 0 | Indicates the type of switching that should be performed on a particular link. This field is needed for links that advertise mor… |
| 1.3.6.1.2.1.10.166.13.2.1.1.5 | gmplsTunnelLinkProtection | 0 | 0 | This bitmask indicates the level of link protection required. A value of zero (no bits set) indicates that any protection may b… |
| 1.3.6.1.2.1.10.166.13.2.1.1.6 | gmplsTunnelGPid | 0 | 0 | This object indicates the payload carried by the LSP. It is only required when GMPLS will be used for this LSP. The values to us… |
| 1.3.6.1.2.1.10.166.13.2.1.1.7 | gmplsTunnelSecondary | 0 | 0 | Indicates that the requested LSP is a secondary LSP. This object is only meaningful if gmplsTunnelLSPEncoding is not set to 'tunn… |
| 1.3.6.1.2.1.10.166.13.2.1.1.8 | gmplsTunnelDirection | 0 | 0 | Whether this tunnel carries forward data only (is unidirectional) or is bidirectional. Values of this object other than 'forward'… |
| 1.3.6.1.2.1.10.166.13.2.1.1.9 | gmplsTunnelPathComp | 0 | 0 | This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries… |
| 1.3.6.1.2.1.10.166.13.2.1.1.10 | gmplsTunnelUpstreamNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelUpstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.11 | gmplsTunnelUpstreamNotifyRecipient | 0 | 0 | Indicates the address of the upstream recipient for Notify messages relating to this tunnel and issued by this LSR. This informa… |
| 1.3.6.1.2.1.10.166.13.2.1.1.12 | gmplsTunnelSendResvNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelSendResvNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.13 | gmplsTunnelSendResvNotifyRecipient | 0 | 0 | Indicates to an upstream LSR the address to which it should send downstream Notify messages relating to this tunnel. This object … |
| 1.3.6.1.2.1.10.166.13.2.1.1.14 | gmplsTunnelDownstreamNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelDownstreamNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.15 | gmplsTunnelDownstreamNotifyRecipient | 0 | 0 | Indicates the address of the downstream recipient for Notify messages relating to this tunnel and issued by this LSR. This infor… |
| 1.3.6.1.2.1.10.166.13.2.1.1.16 | gmplsTunnelSendPathNotifyRecipientType | 0 | 0 | This object is used to aid in interpretation of gmplsTunnelSendPathNotifyRecipient. |
| 1.3.6.1.2.1.10.166.13.2.1.1.17 | gmplsTunnelSendPathNotifyRecipient | 0 | 0 | Indicates to a downstream LSR the address to which it should send upstream Notify messages relating to this tunnel. This object i… |
| 1.3.6.1.2.1.10.166.13.2.1.1.18 | gmplsTunnelAdminStatusFlags | 0 | 0 | Determines the setting of the Admin Status flags in the Admin Status object or TLV, as described in RFC 3471. Setting this field… |
| 1.3.6.1.2.1.10.166.13.2.1.1.19 | gmplsTunnelExtraParamsPtr | 0 | 0 | Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, Synchrono… |