This object identifies a row in this table.
This object identifies a row in this table.
Parsed from file rfc4706-ADSL2.mib-2.txt
Company: None
Module: ADSL2-LINE-MIB
This object identifies a row in this table.
adsl2ChConfProfProfileName OBJECT-TYPE SYNTAX SnmpAdminString(SIZE(1..32)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This object identifies a row in this table." ::= { adsl2ChConfProfileEntry 1 }
Vendor: Cisco Systems
Module: ADSL2-LINE-MIB (ADSL2-LINE-MIB-V1SMI.my)
Type: TABULAR
Access: not-accessible
Syntax: SnmpAdminString
(
1..32 )
Automatically extracted from www.mibdepot.com
adsl2ChConfProfProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." ::= { adsl2ChConfProfileEntry 1 }
adsl2ChConfProfProfileName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies a row in this table." ::= { adsl2ChConfProfileEntry 1 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.238.1.5.2.1.1.2 | adsl2ChConfProfMinDataRateDs | 0 | 0 | Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.3 | adsl2ChConfProfMinDataRateUs | 0 | 0 | Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.4 | adsl2ChConfProfMinResDataRateDs | 0 | 0 | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bits/sec… |
1.3.6.1.2.1.10.238.1.5.2.1.1.5 | adsl2ChConfProfMinResDataRateUs | 0 | 0 | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bits/secon… |
1.3.6.1.2.1.10.238.1.5.2.1.1.6 | adsl2ChConfProfMaxDataRateDs | 0 | 0 | Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.7 | adsl2ChConfProfMaxDataRateUs | 0 | 0 | Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.8 | adsl2ChConfProfMinDataRateLowPwrDs | 0 | 0 | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bits/sec… |
1.3.6.1.2.1.10.238.1.5.2.1.1.9 | adsl2ChConfProfMaxDelayDs | 0 | 0 | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream … |
1.3.6.1.2.1.10.238.1.5.2.1.1.10 | adsl2ChConfProfMaxDelayUs | 0 | 0 | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream dire… |
1.3.6.1.2.1.10.238.1.5.2.1.1.11 | adsl2ChConfProfMinProtectionDs | 0 | 0 | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed… |
1.3.6.1.2.1.10.238.1.5.2.1.1.12 | adsl2ChConfProfMinProtectionUs | 0 | 0 | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed i… |
1.3.6.1.2.1.10.238.1.5.2.1.1.13 | adsl2ChConfProfMaxBerDs | 0 | 0 | Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the… |
1.3.6.1.2.1.10.238.1.5.2.1.1.14 | adsl2ChConfProfMaxBerUs | 0 | 0 | Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the f… |
1.3.6.1.2.1.10.238.1.5.2.1.1.15 | adsl2ChConfProfUsDataRateDs | 0 | 0 | Data Rate Threshold Up shift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream d… |
1.3.6.1.2.1.10.238.1.5.2.1.1.16 | adsl2ChConfProfDsDataRateDs | 0 | 0 | Data Rate Threshold Down-shift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstrea… |
1.3.6.1.2.1.10.238.1.5.2.1.1.17 | adsl2ChConfProfUsDataRateUs | 0 | 0 | Data Rate Threshold Up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data … |
1.3.6.1.2.1.10.238.1.5.2.1.1.18 | adsl2ChConfProfDsDataRateUs | 0 | 0 | Data Rate Threshold Down-shift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream da… |
1.3.6.1.2.1.10.238.1.5.2.1.1.19 | adsl2ChConfProfImaEnabled | 0 | 0 | IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is an ATM Data… |
1.3.6.1.2.1.10.238.1.5.2.1.1.20 | adsl2ChConfProfRowStatus | 0 | 0 | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting t… |