Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3(1),
eminus5(2), or
eminus7(3).
adsl2ChConfProfMaxBerDs OBJECT-TYPE
SYNTAX Adsl2MaxBer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3(1),
eminus5(2), or
eminus7(3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4"
DEFVAL { eminus5 }
View at oid-info.com
Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3(1),
eminus5(2), or
eminus7(3).
Parsed from file rfc4706-ADSL2.mib-2.txt
Company: None
Module: ADSL2-LINE-MIB
Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3(1),
eminus5(2), or
eminus7(3).
adsl2ChConfProfMaxBerDs OBJECT-TYPE SYNTAX Adsl2MaxBer ACCESS read-write STATUS mandatory DESCRIPTION "Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 or 1E-7): eminus3(1), eminus5(2), or eminus7(3)." REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4" DEFVAL { eminus5 } ::= { adsl2ChConfProfileEntry 13 }
Automatically extracted from RFC4706
adsl2ChConfProfMaxBerDs OBJECT-TYPE SYNTAX Adsl2MaxBer MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 or 1E-7): eminus3(1), eminus5(2), or eminus7(3)." REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4" DEFVAL { eminus5 } ::= { adsl2ChConfProfileEntry 13 }
adsl2ChConfProfMaxBerDs OBJECT-TYPE SYNTAX Adsl2MaxBer MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 or 1E-7): eminus3(1), eminus5(2), or eminus7(3)." REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4" DEFVAL { eminus5 } ::= { adsl2ChConfProfileEntry 13 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.238.1.5.2.1.1.1 | adsl2ChConfProfProfileName | 0 | 0 | This object identifies a row in this table. |
1.3.6.1.2.1.10.238.1.5.2.1.1.2 | adsl2ChConfProfMinDataRateDs | 0 | 0 | Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.3 | adsl2ChConfProfMinDataRateUs | 0 | 0 | Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.4 | adsl2ChConfProfMinResDataRateDs | 0 | 0 | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bits/sec… |
1.3.6.1.2.1.10.238.1.5.2.1.1.5 | adsl2ChConfProfMinResDataRateUs | 0 | 0 | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bits/secon… |
1.3.6.1.2.1.10.238.1.5.2.1.1.6 | adsl2ChConfProfMaxDataRateDs | 0 | 0 | Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.7 | adsl2ChConfProfMaxDataRateUs | 0 | 0 | Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.8 | adsl2ChConfProfMinDataRateLowPwrDs | 0 | 0 | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bits/sec… |
1.3.6.1.2.1.10.238.1.5.2.1.1.9 | adsl2ChConfProfMaxDelayDs | 0 | 0 | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream … |
1.3.6.1.2.1.10.238.1.5.2.1.1.10 | adsl2ChConfProfMaxDelayUs | 0 | 0 | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream dire… |
1.3.6.1.2.1.10.238.1.5.2.1.1.11 | adsl2ChConfProfMinProtectionDs | 0 | 0 | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed… |
1.3.6.1.2.1.10.238.1.5.2.1.1.12 | adsl2ChConfProfMinProtectionUs | 0 | 0 | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed i… |
1.3.6.1.2.1.10.238.1.5.2.1.1.14 | adsl2ChConfProfMaxBerUs | 0 | 0 | Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the f… |
1.3.6.1.2.1.10.238.1.5.2.1.1.15 | adsl2ChConfProfUsDataRateDs | 0 | 0 | Data Rate Threshold Up shift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream d… |
1.3.6.1.2.1.10.238.1.5.2.1.1.16 | adsl2ChConfProfDsDataRateDs | 0 | 0 | Data Rate Threshold Down-shift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstrea… |
1.3.6.1.2.1.10.238.1.5.2.1.1.17 | adsl2ChConfProfUsDataRateUs | 0 | 0 | Data Rate Threshold Up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data … |
1.3.6.1.2.1.10.238.1.5.2.1.1.18 | adsl2ChConfProfDsDataRateUs | 0 | 0 | Data Rate Threshold Down-shift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream da… |
1.3.6.1.2.1.10.238.1.5.2.1.1.19 | adsl2ChConfProfImaEnabled | 0 | 0 | IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is an ATM Data… |
1.3.6.1.2.1.10.238.1.5.2.1.1.20 | adsl2ChConfProfRowStatus | 0 | 0 | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting t… |