frPVCEndptRowStatus OBJECT-TYPE SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create new rows in this
table, modify existing rows, and to delete
existing rows. To create a new PVC, the entries
for the PVC segment end-points in the
frPVCEndptTable must first be created. Next, the
frPVCConnectTable is used to associate the frame
relay PVC segment end-points. In order for the
manager to have the necessary error diagnostics,
the frPVCEndptRowStatus object must initially be
set to `createAndWait(5). While the
frPVCEndptRowStatus object is in the
`createAndWait(5) state, the manager can set each
columnar object and get the necessary error
diagnostics. The frPVCEndptRowStatus object may
not be set to `active(1) unless the following
columnar objects exist in this row:
frPVCEndptInMaxFrameSize, frPVCEndptInBc,
frPVCEndptInBe, frPVCEndptInCIR,
frPVCEndptOutMaxFrameSize, frPVCEndptOutBc,
frPVCEndptOutBe, and frPVCEndptOutCIR."
View at oid-info.com
This object is used to create new rows in this
table, modify existing rows, and to delete
existing rows. To create a new PVC, the entries
for the PVC segment end-points in the
frPVCEndptTable must first be created. Next, the
frPVCConnectTable is used to associate the Frame
Relay PVC segment end-points. In order for the
manager to have the necessary error diagnostics,
the frPVCEndptRowStatus object must initially be
set to `createAndWait'. While the
frPVCEndptRowStatus object is in the
`createAndWait' state, the manager can set each
columnar object and get the necessary error
diagnostics. The frPVCEndptRowStatus object may
not be set to `active' unless the following
columnar objects exist in this row:
frPVCEndptInMaxFrameSize, frPVCEndptInBc,
frPVCEndptInBe, frPVCEndptInCIR,
frPVCEndptOutMaxFrameSize, frPVCEndptOutBc,
frPVCEndptOutBe, and frPVCEndptOutCIR.
Parsed from file rfc1604.mib.txt
Company: None
Module: FRNETSERV-MIB
This object is used to create new rows in this
table, modify existing rows, and to delete
existing rows. To create a new PVC, the entries
for the PVC segment end-points in the
frPVCEndptTable must first be created. Next, the
frPVCConnectTable is used to associate the frame
relay PVC segment end-points. In order for the
manager to have the necessary error diagnostics,
the frPVCEndptRowStatus object must initially be
set to `createAndWait(5)'. While the
frPVCEndptRowStatus object is in the
`createAndWait(5)' state, the manager can set each
columnar object and get the necessary error
diagnostics. The frPVCEndptRowStatus object may
not be set to `active(1)' unless the following
columnar objects exist in this row:
frPVCEndptInMaxFrameSize, frPVCEndptInBc,
frPVCEndptInBe, frPVCEndptInCIR,
frPVCEndptOutMaxFrameSize, frPVCEndptOutBc,
frPVCEndptOutBe, and frPVCEndptOutCIR.
Parsed from file FRNETSERV-MIB.mib
Module: FRNETSERV-MIB
Automatically extracted from RFC2954
frPVCEndptRowStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to create new rows in this table, modify existing rows, and to delete existing rows. To create a new PVC, the entries for the PVC segment end-points in the frPVCEndptTable must first be created. Next, the frPVCConnectTable is used to associate the Frame Relay PVC segment end-points. In order for the manager to have the necessary error diagnostics, the frPVCEndptRowStatus object must initially be set to `createAndWait'. While the frPVCEndptRowStatus object is in the `createAndWait' state, the manager can set each columnar object and get the necessary error diagnostics. The frPVCEndptRowStatus object may not be set to `active' unless the following columnar objects exist in this row: frPVCEndptInMaxFrameSize, frPVCEndptInBc, frPVCEndptInBe, frPVCEndptInCIR, frPVCEndptOutMaxFrameSize, frPVCEndptOutBc, frPVCEndptOutBe, and frPVCEndptOutCIR." ::= { frPVCEndptEntry 11 }
frPVCEndptRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create new rows in this table, modify existing rows, and to delete existing rows. To create a new PVC, the entries for the PVC segment end-points in the frPVCEndptTable must first be created. Next, the frPVCConnectTable is used to associate the frame relay PVC segment end-points. In order for the manager to have the necessary error diagnostics, the frPVCEndptRowStatus object must initially be set to `createAndWait(5)'. While the frPVCEndptRowStatus object is in the `createAndWait(5)' state, the manager can set each columnar object and get the necessary error diagnostics. The frPVCEndptRowStatus object may not be set to `active(1)' unless the following columnar objects exist in this row: frPVCEndptInMaxFrameSize, frPVCEndptInBc, frPVCEndptInBe, frPVCEndptInCIR, frPVCEndptOutMaxFrameSize, frPVCEndptOutBc, frPVCEndptOutBe, and frPVCEndptOutCIR." ::= { frPVCEndptEntry 11 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.44.1.3.1.1 | frPVCEndptDLCIIndex | 0 | 0 | The value of this object is equal to the DLCI value for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.2 | frPVCEndptInMaxFrameSize | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this PVC end-point in the ingress… |
| 1.3.6.1.2.1.10.44.1.3.1.3 | frPVCEndptInBc | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the ing… |
| 1.3.6.1.2.1.10.44.1.3.1.4 | frPVCEndptInBe | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC end-point in the ingres… |
| 1.3.6.1.2.1.10.44.1.3.1.5 | frPVCEndptInCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC en… |
| 1.3.6.1.2.1.10.44.1.3.1.6 | frPVCEndptOutMaxFrameSize | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this PVC end-point in the egress … |
| 1.3.6.1.2.1.10.44.1.3.1.7 | frPVCEndptOutBc | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the egr… |
| 1.3.6.1.2.1.10.44.1.3.1.8 | frPVCEndptOutBe | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC end-point in the egress… |
| 1.3.6.1.2.1.10.44.1.3.1.9 | frPVCEndptOutCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC en… |
| 1.3.6.1.2.1.10.44.1.3.1.10 | frPVCEndptConnectIdentifier | 0 | 0 | This object is used to associate PVC end-points as being part of one PVC segment connection. This value of this object is equal … |
| 1.3.6.1.2.1.10.44.1.3.1.12 | frPVCEndptRcvdSigStatus | 0 | 0 | The value of this object identifies the PVC status received via the local in-channel signaling procedures for this PVC end-point.… |
| 1.3.6.1.2.1.10.44.1.3.1.13 | frPVCEndptInFrames | 0 | 0 | The number of frames received by the network (ingress) for this PVC end-point. This includes any frames discarded by the network … |
| 1.3.6.1.2.1.10.44.1.3.1.14 | frPVCEndptOutFrames | 0 | 0 | The number of frames sent by the network (egress) regardless of whether they are Bc or Be frames for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.15 | frPVCEndptInDEFrames | 0 | 0 | The number of frames received by the network (ingress) with the DE bit set to (1) for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.16 | frPVCEndptInExcessFrames | 0 | 0 | The number of frames received by the network (ingress) for this PVC end-point which were treated as excess traffic. Frames which… |
| 1.3.6.1.2.1.10.44.1.3.1.17 | frPVCEndptOutExcessFrames | 0 | 0 | The number of frames sent by the network (egress) for this PVC end-point which were treated as excess traffic. (The DE bit may b… |
| 1.3.6.1.2.1.10.44.1.3.1.18 | frPVCEndptInDiscards | 0 | 0 | The number of frames received by the the network (ingress) that were discarded due to traffic enforcement for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.19 | frPVCEndptInOctets | 0 | 0 | The number of octets received by the network (ingress) for this PVC end-point. This counter should only count octets from the be… |
| 1.3.6.1.2.1.10.44.1.3.1.20 | frPVCEndptOutOctets | 0 | 0 | The number of octets sent by the network (egress) for this PVC end-point. This counter should only count octets from the beginni… |
| 1.3.6.1.2.1.10.44.1.3.1.21 | frPVCEndptInDiscardsDESet | 0 | 0 | The number of frames received by the network (ingress) that were discarded with the DE bit set due to traffic enforcement for thi… |
| 1.3.6.1.2.1.10.44.1.3.1.22 | frPVCEndptInFramesFECNSet | 0 | 0 | The number of frames received by the network (ingress) that have the FECN bit set for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.23 | frPVCEndptOutFramesFECNSet | 0 | 0 | The number of frames sent by the network (egress) that have the FECN bit set for this PVC end- point. |
| 1.3.6.1.2.1.10.44.1.3.1.24 | frPVCEndptInFramesBECNSet | 0 | 0 | The number of frames received by the network (ingress) that have the BECN bit set for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.25 | frPVCEndptOutFramesBECNSet | 0 | 0 | The number of frames sent by the network (egress) that have the BECN bit set for this PVC end- point. |
| 1.3.6.1.2.1.10.44.1.3.1.26 | frPVCEndptInCongDiscards | 0 | 0 | The number of frames received by the network (ingress) that were discarded due to input buffer congestion, rather than traffic en… |
| 1.3.6.1.2.1.10.44.1.3.1.27 | frPVCEndptInDECongDiscards | 0 | 0 | The number of frames counted by frPVCEndptInCongDiscards with the DE bit set to (1). |
| 1.3.6.1.2.1.10.44.1.3.1.28 | frPVCEndptOutCongDiscards | 0 | 0 | The number of frames sent by the network (egress) that were discarded due to output buffer congestion for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.29 | frPVCEndptOutDECongDiscards | 0 | 0 | The number of frames counted by frPVCEndptOutCongDiscards with the DE bit set to (1). |
| 1.3.6.1.2.1.10.44.1.3.1.30 | frPVCEndptOutDEFrames | 0 | 0 | The number of frames sent by the network (egress) with the DE bit set to (1) for this PVC end- point. |
| 1.3.6.1.2.1.10.44.1.3.1.31 | frPVCEndptAtmIwfConnIndex | 0 | 0 | This object contains the index value of the FR/ATM cross-connect table entry used to link the frame relay PVC with an ATM PVC. Eac… |