frPVCEndptRcvdSigStatus OBJECT-TYPE SYNTAX INTEGER {
deleted(1),
active(2),
inactive(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the PVC
status received via the local in-channel signaling
procedures for this PVC end-point. This object is
only pertinent for interfaces that perform the
bidirectional procedures.
Each value has the following meaning:
deleted(1): This PVC is not listed in the full
status reports received from the
user device. The object retains
this value for as long as the PVC
is not listed in the full status
reports
active(2): This PVC is reported as active, or
operational, by the user device.
inactive(3): This PVC is reported as inactive,
or non-operational, by the user
device.
none(4): This interface is only using the
network-side in-channel signaling
procedures, so this object does
not apply."
View at oid-info.com
The value of this object identifies the PVC
status received via the local in-channel signaling
procedures for this PVC end-point. This object is
only pertinent for interfaces that perform the
bidirectional procedures. For user-to-network
network side procedures, the value of this object
should be none.
Parsed from file rfc1604.mib.txt
Company: None
Module: FRNETSERV-MIB
The value of this object identifies the PVC
status received via the local in-channel signaling
procedures for this PVC end-point. This object is
only pertinent for interfaces that perform the
bidirectional procedures.
Each value has the following meaning:
deleted(1): This PVC is not listed in the full
status reports received from the
user device. The object retains
this value for as long as the PVC
is not listed in the full status
reports
active(2): This PVC is reported as active, or
operational, by the user device.
inactive(3): This PVC is reported as inactive,
or non-operational, by the user
device.
none(4): This interface is only using the
network-side in-channel signaling
procedures, so this object does
not apply.
Parsed from file FRNETSERV-MIB.mib
Module: FRNETSERV-MIB
Automatically extracted from RFC2954
frPVCEndptRcvdSigStatus OBJECT-TYPE SYNTAX INTEGER { deleted(1), active(2), inactive(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the PVC status received via the local in-channel signaling procedures for this PVC end-point. This object is only pertinent for interfaces that perform the bidirectional procedures. For user-to-network network side procedures, the value of this object should be none." ::= { frPVCEndptEntry 12 }
frPVCEndptRcvdSigStatus OBJECT-TYPE SYNTAX INTEGER { deleted(1), active(2), inactive(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object identifies the PVC status received via the local in-channel signaling procedures for this PVC end-point. This object is only pertinent for interfaces that perform the bidirectional procedures. Each value has the following meaning: deleted(1): This PVC is not listed in the full status reports received from the user device. The object retains this value for as long as the PVC is not listed in the full status reports active(2): This PVC is reported as active, or operational, by the user device. inactive(3): This PVC is reported as inactive, or non-operational, by the user device. none(4): This interface is only using the network-side in-channel signaling procedures, so this object does not apply." ::= { frPVCEndptEntry 12 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.44.1.3.1.1 | frPVCEndptDLCIIndex | 0 | 0 | The value of this object is equal to the DLCI value for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.2 | frPVCEndptInMaxFrameSize | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this PVC end-point in the ingress… |
| 1.3.6.1.2.1.10.44.1.3.1.3 | frPVCEndptInBc | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the ing… |
| 1.3.6.1.2.1.10.44.1.3.1.4 | frPVCEndptInBe | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC end-point in the ingres… |
| 1.3.6.1.2.1.10.44.1.3.1.5 | frPVCEndptInCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC en… |
| 1.3.6.1.2.1.10.44.1.3.1.6 | frPVCEndptOutMaxFrameSize | 0 | 0 | The value of this object is the size in octets of the largest frame relay information field for this PVC end-point in the egress … |
| 1.3.6.1.2.1.10.44.1.3.1.7 | frPVCEndptOutBc | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (measured in bits) for this PVC end-point in the egr… |
| 1.3.6.1.2.1.10.44.1.3.1.8 | frPVCEndptOutBe | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (measured in bits) for this PVC end-point in the egress… |
| 1.3.6.1.2.1.10.44.1.3.1.9 | frPVCEndptOutCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (measured in bits per second) for this PVC en… |
| 1.3.6.1.2.1.10.44.1.3.1.10 | frPVCEndptConnectIdentifier | 0 | 0 | This object is used to associate PVC end-points as being part of one PVC segment connection. This value of this object is equal … |
| 1.3.6.1.2.1.10.44.1.3.1.11 | frPVCEndptRowStatus | 0 | 0 | This object is used to create new rows in this table, modify existing rows, and to delete existing rows. To create a new PVC, th… |
| 1.3.6.1.2.1.10.44.1.3.1.13 | frPVCEndptInFrames | 0 | 0 | The number of frames received by the network (ingress) for this PVC end-point. This includes any frames discarded by the network … |
| 1.3.6.1.2.1.10.44.1.3.1.14 | frPVCEndptOutFrames | 0 | 0 | The number of frames sent by the network (egress) regardless of whether they are Bc or Be frames for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.15 | frPVCEndptInDEFrames | 0 | 0 | The number of frames received by the network (ingress) with the DE bit set to (1) for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.16 | frPVCEndptInExcessFrames | 0 | 0 | The number of frames received by the network (ingress) for this PVC end-point which were treated as excess traffic. Frames which… |
| 1.3.6.1.2.1.10.44.1.3.1.17 | frPVCEndptOutExcessFrames | 0 | 0 | The number of frames sent by the network (egress) for this PVC end-point which were treated as excess traffic. (The DE bit may b… |
| 1.3.6.1.2.1.10.44.1.3.1.18 | frPVCEndptInDiscards | 0 | 0 | The number of frames received by the the network (ingress) that were discarded due to traffic enforcement for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.19 | frPVCEndptInOctets | 0 | 0 | The number of octets received by the network (ingress) for this PVC end-point. This counter should only count octets from the be… |
| 1.3.6.1.2.1.10.44.1.3.1.20 | frPVCEndptOutOctets | 0 | 0 | The number of octets sent by the network (egress) for this PVC end-point. This counter should only count octets from the beginni… |
| 1.3.6.1.2.1.10.44.1.3.1.21 | frPVCEndptInDiscardsDESet | 0 | 0 | The number of frames received by the network (ingress) that were discarded with the DE bit set due to traffic enforcement for thi… |
| 1.3.6.1.2.1.10.44.1.3.1.22 | frPVCEndptInFramesFECNSet | 0 | 0 | The number of frames received by the network (ingress) that have the FECN bit set for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.23 | frPVCEndptOutFramesFECNSet | 0 | 0 | The number of frames sent by the network (egress) that have the FECN bit set for this PVC end- point. |
| 1.3.6.1.2.1.10.44.1.3.1.24 | frPVCEndptInFramesBECNSet | 0 | 0 | The number of frames received by the network (ingress) that have the BECN bit set for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.25 | frPVCEndptOutFramesBECNSet | 0 | 0 | The number of frames sent by the network (egress) that have the BECN bit set for this PVC end- point. |
| 1.3.6.1.2.1.10.44.1.3.1.26 | frPVCEndptInCongDiscards | 0 | 0 | The number of frames received by the network (ingress) that were discarded due to input buffer congestion, rather than traffic en… |
| 1.3.6.1.2.1.10.44.1.3.1.27 | frPVCEndptInDECongDiscards | 0 | 0 | The number of frames counted by frPVCEndptInCongDiscards with the DE bit set to (1). |
| 1.3.6.1.2.1.10.44.1.3.1.28 | frPVCEndptOutCongDiscards | 0 | 0 | The number of frames sent by the network (egress) that were discarded due to output buffer congestion for this PVC end-point. |
| 1.3.6.1.2.1.10.44.1.3.1.29 | frPVCEndptOutDECongDiscards | 0 | 0 | The number of frames counted by frPVCEndptOutCongDiscards with the DE bit set to (1). |
| 1.3.6.1.2.1.10.44.1.3.1.30 | frPVCEndptOutDEFrames | 0 | 0 | The number of frames sent by the network (egress) with the DE bit set to (1) for this PVC end- point. |
| 1.3.6.1.2.1.10.44.1.3.1.31 | frPVCEndptAtmIwfConnIndex | 0 | 0 | This object contains the index value of the FR/ATM cross-connect table entry used to link the frame relay PVC with an ATM PVC. Eac… |