The charging Information facility. A value
of default for a circuit means use the PLE
default. The value of default for the
default PLE parameters means use noFacility.
The value of noFacility means do not include
a facility.
x25CallParmChargingInfo OBJECT-TYPE
SYNTAX INTEGER {
default (1),
noFacility (2),
noChargingInfo (3),
chargingInfo (4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The charging Information facility. A value
of default for a circuit means use the PLE
default. The value of default for the
default PLE parameters means use noFacility.
The value of noFacility means do not include
a facility."
REFERENCE "See ISO 8208 Section 15.2.2.8"
DEFVAL { noFacility }
View at oid-info.com
The charging Information facility. A value
of default for a circuit means use the PLE
default. The value of default for the
default PLE parameters means use noFacility.
The value of noFacility means do not include
a facility.
Agent variations:
DESCRIPTION
not settable
Parsed from file it-router-12.mib.txt
Company: None
Module: IT-ROUTER-12
The charging Information facility. A value
of default for a circuit means use the PLE
default. The value of default for the
default PLE parameters means use noFacility.
The value of noFacility means do not include
a facility.
Parsed from file ITOUCHHUB.mib
Module: ITOUCHHUB
x25CallParmChargingInfo OBJECT-TYPE SYNTAX INTEGER { default (1), noFacility (2), noChargingInfo (3), chargingInfo (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The charging Information facility. A value of default for a circuit means use the PLE default. The value of default for the default PLE parameters means use noFacility. The value of noFacility means do not include a facility." REFERENCE "See ISO 8208 Section 15.2.2.8" DEFVAL { noFacility } ::= { x25CallParmEntry 17 }
Automatically extracted from RFC1382
x25CallParmChargingInfo OBJECT-TYPE SYNTAX INTEGER { default (1), noFacility (2), noChargingInfo (3), chargingInfo (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The charging Information facility. A value of default for a circuit means use the PLE default. The value of default for the default PLE parameters means use noFacility. The value of noFacility means do not include a facility. Agent variations: DESCRIPTION not settable" REFERENCE "See ISO 8208 Section 15.2.2.8" DEFVAL { noFacility } ::= { x25CallParmEntry 17 }
x25CallParmChargingInfo OBJECT-TYPE SYNTAX INTEGER { default (1), noFacility (2), noChargingInfo (3), chargingInfo (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The charging Information facility. A value of default for a circuit means use the PLE default. The value of default for the default PLE parameters means use noFacility. The value of noFacility means do not include a facility." REFERENCE "See ISO 8208 Section 15.2.2.8" DEFVAL { noFacility } ::= { x25CallParmEntry 17 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.5.9.1.1 | x25CallParmIndex | 0 | 0 | A value that distinguishes this entry from another entry. Entries in this table are referenced from other objects which identify… |
1.3.6.1.2.1.10.5.9.1.2 | x25CallParmStatus | 0 | 0 | The status of this call parameter entry. See RFC 1271 for details of usage. |
1.3.6.1.2.1.10.5.9.1.3 | x25CallParmRefCount | 0 | 0 | The number of references know by a management station to exist to this set of call parameters. This is the number of other object… |
1.3.6.1.2.1.10.5.9.1.4 | x25CallParmInPacketSize | 0 | 0 | The maximum receive packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of… |
1.3.6.1.2.1.10.5.9.1.5 | x25CallParmOutPacketSize | 0 | 0 | The maximum transmit packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size o… |
1.3.6.1.2.1.10.5.9.1.6 | x25CallParmInWindowSize | 0 | 0 | The receive window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE d… |
1.3.6.1.2.1.10.5.9.1.7 | x25CallParmOutWindowSize | 0 | 0 | The transmit window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE… |
1.3.6.1.2.1.10.5.9.1.8 | x25CallParmAcceptReverseCharging | 0 | 0 | An enumeration defining if the PLE will accept or refuse charges. A value of default for a circuit means use the PLE default valu… |
1.3.6.1.2.1.10.5.9.1.9 | x25CallParmProposeReverseCharging | 0 | 0 | An enumeration defining if the PLE should propose reverse or local charging. The value of default for a circuit means use the PLE… |
1.3.6.1.2.1.10.5.9.1.10 | x25CallParmFastSelect | 0 | 0 | Expresses preference for use of fast select facility. The value of default for a circuit is the PLE default. A value of default … |
1.3.6.1.2.1.10.5.9.1.11 | x25CallParmInThruPutClasSize | 0 | 0 | The incoming throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault f… |
1.3.6.1.2.1.10.5.9.1.12 | x25CallParmOutThruPutClasSize | 0 | 0 | The outgoing throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault f… |
1.3.6.1.2.1.10.5.9.1.13 | x25CallParmCug | 0 | 0 | The Closed User Group to specify. This consists of two or four octets containing the characters 0 through 9. A zero length strin… |
1.3.6.1.2.1.10.5.9.1.14 | x25CallParmCugoa | 0 | 0 | The Closed User Group with Outgoing Access to specify. This consists of two or four octets containing the characters 0 through 9.… |
1.3.6.1.2.1.10.5.9.1.15 | x25CallParmBcug | 0 | 0 | The Bilateral Closed User Group to specify. This consists of two octets containing the characters 0 through 9. A string length o… |
1.3.6.1.2.1.10.5.9.1.16 | x25CallParmNui | 0 | 0 | The Network User Identifier facility. This is binary value to be included immediately after the length field. The PLE will supp… |
1.3.6.1.2.1.10.5.9.1.18 | x25CallParmRpoa | 0 | 0 | The RPOA facility. The octet string contains n * 4 sequences of the characters 0-9 to specify a facility with n entries. The octe… |
1.3.6.1.2.1.10.5.9.1.19 | x25CallParmTrnstDly | 0 | 0 | The Transit Delay Selection and Indication value. A value of 65536 indicates no facility requested. A value of 65537 for a circu… |
1.3.6.1.2.1.10.5.9.1.20 | x25CallParmCallingExt | 0 | 0 | The Calling Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the faci… |
1.3.6.1.2.1.10.5.9.1.21 | x25CallParmCalledExt | 0 | 0 | The Called Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facil… |
1.3.6.1.2.1.10.5.9.1.22 | x25CallParmInMinThuPutCls | 0 | 0 | The minimum input throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use t… |
1.3.6.1.2.1.10.5.9.1.23 | x25CallParmOutMinThuPutCls | 0 | 0 | The minimum output throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use … |
1.3.6.1.2.1.10.5.9.1.24 | x25CallParmEndTrnsDly | 0 | 0 | The End-to-End Transit Delay to negotiate. An octet string of length 2, 4, or 6 contains the facility encoded as specified in ISO/… |
1.3.6.1.2.1.10.5.9.1.25 | x25CallParmPriority | 0 | 0 | The priority facility to negotiate. The octet string encoded as specified in ISO/IEC 8208 section 15.3.2.5. A zero length strin… |
1.3.6.1.2.1.10.5.9.1.26 | x25CallParmProtection | 0 | 0 | A string contains the following: A hex string containing the value for the protection facility. This will be converted from hex t… |
1.3.6.1.2.1.10.5.9.1.27 | x25CallParmExptData | 0 | 0 | The Expedited Data facility to negotiate. A value of default for a circuit means use the PLE default value. The entry for the PLE… |
1.3.6.1.2.1.10.5.9.1.28 | x25CallParmUserData | 0 | 0 | The call user data as placed in the packet. A zero length string indicates no call user data. If both the circuit call parameter… |
1.3.6.1.2.1.10.5.9.1.29 | x25CallParmCallingNetworkFacilities | 0 | 0 | The calling network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not i… |
1.3.6.1.2.1.10.5.9.1.30 | x25CallParmCalledNetworkFacilities | 0 | 0 | The called network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not in… |