The Transit Delay Selection and Indication
value. A value of 65536 indicates no
facility requested. A value of 65537 for a
circuit means use the PLE default (the PLE
default parameters entry may not use the
value 65537). The value 65535 may only be
used to indicate the value in use by a
circuit.
x25CallParmTrnstDly OBJECT-TYPE
SYNTAX INTEGER (0..65537)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Transit Delay Selection and Indication
value. A value of 65536 indicates no
facility requested. A value of 65537 for a
circuit means use the PLE default (the PLE
default parameters entry may not use the
value 65537). The value 65535 may only be
used to indicate the value in use by a
circuit."
REFERENCE "See ISO 8208, Section 15.2.2.13"
DEFVAL { 65536 }
View at oid-info.com
The Transit Delay Selection and Indication
value. A value of 65536 indicates no
facility requested. A value of 65537 for a
circuit means use the PLE default (the PLE
default parameters entry may not use the
value 65537). The value 65535 may only be
used to indicate the value in use by a
circuit.
Agent variations:
DESCRIPTION
always 0
Parsed from file it-router-12.mib.txt
Company: None
Module: IT-ROUTER-12
The Transit Delay Selection and Indication
value. A value of 65536 indicates no
facility requested. A value of 65537 for a
circuit means use the PLE default (the PLE
default parameters entry may not use the
value 65537). The value 65535 may only be
used to indicate the value in use by a
circuit.
Parsed from file ITOUCHHUB.mib
Module: ITOUCHHUB
x25CallParmTrnstDly OBJECT-TYPE SYNTAX INTEGER (0..65537) ACCESS read-write STATUS mandatory DESCRIPTION "The Transit Delay Selection and Indication value. A value of 65536 indicates no facility requested. A value of 65537 for a circuit means use the PLE default (the PLE default parameters entry may not use the value 65537). The value 65535 may only be used to indicate the value in use by a circuit." REFERENCE "See ISO 8208, Section 15.2.2.13" DEFVAL { 65536 } ::= { x25CallParmEntry 19 }
Automatically extracted from RFC1382
x25CallParmTrnstDly OBJECT-TYPE SYNTAX INTEGER (0..65537) ACCESS read-only STATUS mandatory DESCRIPTION "The Transit Delay Selection and Indication value. A value of 65536 indicates no facility requested. A value of 65537 for a circuit means use the PLE default (the PLE default parameters entry may not use the value 65537). The value 65535 may only be used to indicate the value in use by a circuit. Agent variations: DESCRIPTION always 0" REFERENCE "See ISO 8208, Section 15.2.2.13" DEFVAL { 65536 } ::= { x25CallParmEntry 19 }
x25CallParmTrnstDly OBJECT-TYPE SYNTAX INTEGER (0..65537) ACCESS read-write STATUS mandatory DESCRIPTION "The Transit Delay Selection and Indication value. A value of 65536 indicates no facility requested. A value of 65537 for a circuit means use the PLE default (the PLE default parameters entry may not use the value 65537). The value 65535 may only be used to indicate the value in use by a circuit." REFERENCE "See ISO 8208, Section 15.2.2.13" DEFVAL { 65536 } ::= { x25CallParmEntry 19 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.5.9.1.1 | x25CallParmIndex | 0 | 0 | A value that distinguishes this entry from another entry. Entries in this table are referenced from other objects which identify… |
| 1.3.6.1.2.1.10.5.9.1.2 | x25CallParmStatus | 0 | 0 | The status of this call parameter entry. See RFC 1271 for details of usage. |
| 1.3.6.1.2.1.10.5.9.1.3 | x25CallParmRefCount | 0 | 0 | The number of references know by a management station to exist to this set of call parameters. This is the number of other object… |
| 1.3.6.1.2.1.10.5.9.1.4 | x25CallParmInPacketSize | 0 | 0 | The maximum receive packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size of… |
| 1.3.6.1.2.1.10.5.9.1.5 | x25CallParmOutPacketSize | 0 | 0 | The maximum transmit packet size in octets for a circuit. A size of zero for a circuit means use the PLE default size. A size o… |
| 1.3.6.1.2.1.10.5.9.1.6 | x25CallParmInWindowSize | 0 | 0 | The receive window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE d… |
| 1.3.6.1.2.1.10.5.9.1.7 | x25CallParmOutWindowSize | 0 | 0 | The transmit window size for a circuit. A size of zero for a circuit means use the PLE default size. A size of zero for the PLE… |
| 1.3.6.1.2.1.10.5.9.1.8 | x25CallParmAcceptReverseCharging | 0 | 0 | An enumeration defining if the PLE will accept or refuse charges. A value of default for a circuit means use the PLE default valu… |
| 1.3.6.1.2.1.10.5.9.1.9 | x25CallParmProposeReverseCharging | 0 | 0 | An enumeration defining if the PLE should propose reverse or local charging. The value of default for a circuit means use the PLE… |
| 1.3.6.1.2.1.10.5.9.1.10 | x25CallParmFastSelect | 0 | 0 | Expresses preference for use of fast select facility. The value of default for a circuit is the PLE default. A value of default … |
| 1.3.6.1.2.1.10.5.9.1.11 | x25CallParmInThruPutClasSize | 0 | 0 | The incoming throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault f… |
| 1.3.6.1.2.1.10.5.9.1.12 | x25CallParmOutThruPutClasSize | 0 | 0 | The outgoing throughput class to negotiate. A value of tcDefault for a circuit means use the PLE default. A value of tcDefault f… |
| 1.3.6.1.2.1.10.5.9.1.13 | x25CallParmCug | 0 | 0 | The Closed User Group to specify. This consists of two or four octets containing the characters 0 through 9. A zero length strin… |
| 1.3.6.1.2.1.10.5.9.1.14 | x25CallParmCugoa | 0 | 0 | The Closed User Group with Outgoing Access to specify. This consists of two or four octets containing the characters 0 through 9.… |
| 1.3.6.1.2.1.10.5.9.1.15 | x25CallParmBcug | 0 | 0 | The Bilateral Closed User Group to specify. This consists of two octets containing the characters 0 through 9. A string length o… |
| 1.3.6.1.2.1.10.5.9.1.16 | x25CallParmNui | 0 | 0 | The Network User Identifier facility. This is binary value to be included immediately after the length field. The PLE will supp… |
| 1.3.6.1.2.1.10.5.9.1.17 | x25CallParmChargingInfo | 0 | 0 | The charging Information facility. A value of default for a circuit means use the PLE default. The value of default for the defa… |
| 1.3.6.1.2.1.10.5.9.1.18 | x25CallParmRpoa | 0 | 0 | The RPOA facility. The octet string contains n * 4 sequences of the characters 0-9 to specify a facility with n entries. The octe… |
| 1.3.6.1.2.1.10.5.9.1.20 | x25CallParmCallingExt | 0 | 0 | The Calling Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the faci… |
| 1.3.6.1.2.1.10.5.9.1.21 | x25CallParmCalledExt | 0 | 0 | The Called Extension facility. This contains one of the following: A sequence of hex digits with the value to be put in the facil… |
| 1.3.6.1.2.1.10.5.9.1.22 | x25CallParmInMinThuPutCls | 0 | 0 | The minimum input throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use t… |
| 1.3.6.1.2.1.10.5.9.1.23 | x25CallParmOutMinThuPutCls | 0 | 0 | The minimum output throughput Class. A value of 16 for a circuit means use the PLE default (the PLE parameters entry may not use … |
| 1.3.6.1.2.1.10.5.9.1.24 | x25CallParmEndTrnsDly | 0 | 0 | The End-to-End Transit Delay to negotiate. An octet string of length 2, 4, or 6 contains the facility encoded as specified in ISO/… |
| 1.3.6.1.2.1.10.5.9.1.25 | x25CallParmPriority | 0 | 0 | The priority facility to negotiate. The octet string encoded as specified in ISO/IEC 8208 section 15.3.2.5. A zero length strin… |
| 1.3.6.1.2.1.10.5.9.1.26 | x25CallParmProtection | 0 | 0 | A string contains the following: A hex string containing the value for the protection facility. This will be converted from hex t… |
| 1.3.6.1.2.1.10.5.9.1.27 | x25CallParmExptData | 0 | 0 | The Expedited Data facility to negotiate. A value of default for a circuit means use the PLE default value. The entry for the PLE… |
| 1.3.6.1.2.1.10.5.9.1.28 | x25CallParmUserData | 0 | 0 | The call user data as placed in the packet. A zero length string indicates no call user data. If both the circuit call parameter… |
| 1.3.6.1.2.1.10.5.9.1.29 | x25CallParmCallingNetworkFacilities | 0 | 0 | The calling network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not i… |
| 1.3.6.1.2.1.10.5.9.1.30 | x25CallParmCalledNetworkFacilities | 0 | 0 | The called network facilities. The facilities are encoded here exactly as encoded in the call packet. These facilities do not in… |