Returns or changes the default number of lines per page.
The POS indicates the supported values. An unsupported
value causes the printer to use the closest supported
value, causing the printer to return the
Additional information:
The supported values in the Laserjet 3200
are 5 to 128. Setting to an unsupported value
causes the printer to substitute in a snap value and to
return
The snap values are as follows:
<5 snaps to 5
>128 snaps to 128
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
Returns or changes the default number of lines per page.
The POS indicates the supported values. An unsupported
value causes the printer to use the closest supported
value, causing the printer to return the
Additional information:
The supported values in LaserJet 5Si are 5 to 128.
Setting to an unsupported value causes the
the printer to substitute in a snap value and to return
status.
The snap values are as follow:
<5 snaps to 5
>128 snaps to 128
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
default-lines-per-page OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return the
. Additional information: The supported values in the Laserjet 3200 are 5 to 128. Setting to an unsupported value causes the printer to substitute in a snap value and to return status. The snap values are as follows: <5 snaps to 5 >128 snaps to 128" ::= { settings-pdl 11 }
default-lines-per-page OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return the
. Additional information: The supported values in LaserJet 5Si are 5 to 128. Setting to an unsupported value causes the the printer to substitute in a snap value and to return status. The snap values are as follow: <5 snaps to 5 >128 snaps to 128" ::= { settings-pdl 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11.0 | default-lines-per-page | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.2 | default-orientation | 1 | 1 | Returns or changes the default orientation. The list of supported values should be documented in the device POS. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | default-copies | 1 | 1 | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 | form-feed | 1 | 1 | Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6 | resource-saving | 1 | 1 | Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another P… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.7 | maximum-resource-saving-memory | 1 | 1 | This object's name is misleading. This object returns the maximum amount of additional memory, in bytes, that can be dedicated t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | default-vertical-black-resolution | 1 | 1 | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In La… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | default-horizontal-black-resolution | 1 | 1 | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 | default-page-protect | 1 | 1 | Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raste… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | default-vmi | 1 | 1 | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | default-media-size, default-pdl | 1 | 1 | This indicates the default media size. A write of an unsupported value cases an Complete list of supported media sizes along wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | cold-reset-media-size | 1 | 1 | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 | default-media-name, default-orientation | 1 | 1 | Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | reprint, context-sensitive-pdl-selection | 1 | 1 | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the devi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.37 | wide-a4 | 1 | 1 | Returns or changes the wide A4 logical page size setting. If eOn, then the margins/printable area of A4 paper will be changed to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.38 | dark-courier | 1 | 1 | Returns or changes the dark Courier setting. If eOn, then the Courier font used will approximate the same darkness as the LaserJ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 | default-bits-per-pixel | 1 | 1 | Controls the number of levels used (per pixel) when printing grayscale or color images. |