Returns or changes PDL resource saving. Resource saving
stores a PDL's permanent soft resources, like fonts,
even when another PDL is active. Resource saving is
also called environment saving. When eOff, resource
saving is disabled. When ON, resource saving is enabled
and memory is set aside for each PDL based on that PDL's
resource saving memory size object, to store that PDL's
permanent soft resources. When eAuto, resource saving
is enabled and memory space for each installed PDL is
determined automatically. The device POS should
document what values are legal when only one PDL is
installed.
Additional information:
When PCL is the only PDL installed in
LaserJet 5Si, all resource saving memory is dedicated to
PCL so eOff is the only valid value. Attempting to set this object to eAuto
or eOn with a PCL-only printer will result in a status of
When PostScript is installed and there is less than
13M of memory installed, the only valid value for this object is eOff.
Attempting to set this object to eOn or eAuto will cause
When PostScript and a duplex unit are installed and there is less than
24M of memory installed, the only valid value for this object is eOff.
Attempting to set this object to eOn or eAuto will cause
When PostScript and 13M (24M with duplex unit) or more are installed, all
values are valid, provided I/O Buffering has not consumed the needed
memory.
Parsed from file LJ5SIMOP.MIB.txt
Company: None
Module: LaserJet5Si-Mopier-MIB
Returns or changes PDL resource saving. Resource saving
stores a PDL's permanent soft resources, like fonts,
even when another PDL is active. Resource saving is
also called environment saving. When eOff, resource
saving is disabled. When ON, resource saving is enabled
and memory is set aside for each PDL based on that PDL's
resource saving memory size object, to store that PDL's
permanent soft resources. When eAuto, resource saving
is enabled and memory space for each installed PDL is
determined automatically. The device POS should
document what values are legal when only one PDL is
installed.
Additional information:
When PCL is the only PDL installed in
LaserJet 5Si, all resource saving memory is dedicated to
PCL so eOff is the only valid value. Attempting to set this object to eAuto
or eOn with a PCL-only printer will result in a status of
When PostScript is installed and there is less than
13M of memory installed, the only valid value for this object is eOff.
Attempting to set this object to eOn or eAuto will cause
When PostScript and a duplex unit are installed and there is less than
24M of memory installed, the only valid value for this object is eOff.
Attempting to set this object to eOn or eAuto will cause
When PostScript and 13M (24M with duplex unit) or more are installed, all
values are valid, provided I/O Buffering has not consumed the needed
memory.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
resource-saving OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2), eAuto(3) } ACCESS read-write STATUS optional DESCRIPTION "Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another PDL is active. Resource saving is also called environment saving. When eOff, resource saving is disabled. When ON, resource saving is enabled and memory is set aside for each PDL based on that PDL's resource saving memory size object, to store that PDL's permanent soft resources. When eAuto, resource saving is enabled and memory space for each installed PDL is determined automatically. The device POS should document what values are legal when only one PDL is installed. Additional information: When PCL is the only PDL installed in LaserJet 5Si, all resource saving memory is dedicated to PCL so eOff is the only valid value. Attempting to set this object to eAuto or eOn with a PCL-only printer will result in a status of
being returned. When PostScript is installed and there is less than 13M of memory installed, the only valid value for this object is eOff. Attempting to set this object to eOn or eAuto will cause to be returned. When PostScript and a duplex unit are installed and there is less than 24M of memory installed, the only valid value for this object is eOff. Attempting to set this object to eOn or eAuto will cause to be returned. When PostScript and 13M (24M with duplex unit) or more are installed, all values are valid, provided I/O Buffering has not consumed the needed memory." ::= { settings-pdl 6 }
resource-saving OBJECT-TYPE SYNTAX INTEGER { eOff(1), eOn(2), eAuto(3) } ACCESS read-write STATUS optional DESCRIPTION "Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another PDL is active. Resource saving is also called environment saving. When eOff, resource saving is disabled. When ON, resource saving is enabled and memory is set aside for each PDL based on that PDL's resource saving memory size object, to store that PDL's permanent soft resources. When eAuto, resource saving is enabled and memory space for each installed PDL is determined automatically. The device POS should document what values are legal when only one PDL is installed. Additional information: When PCL is the only PDL installed in LaserJet 5Si, all resource saving memory is dedicated to PCL so eOff is the only valid value. Attempting to set this object to eAuto or eOn with a PCL-only printer will result in a status of
being returned. When PostScript is installed and there is less than 13M of memory installed, the only valid value for this object is eOff. Attempting to set this object to eOn or eAuto will cause to be returned. When PostScript and a duplex unit are installed and there is less than 24M of memory installed, the only valid value for this object is eOff. Attempting to set this object to eOn or eAuto will cause to be returned. When PostScript and 13M (24M with duplex unit) or more are installed, all values are valid, provided I/O Buffering has not consumed the needed memory." ::= { settings-pdl 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6.0 | resource-saving | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.2 | default-orientation | 1 | 1 | Returns or changes the default orientation. The list of supported values should be documented in the device POS. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | default-copies | 1 | 1 | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 | form-feed | 1 | 1 | Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.7 | maximum-resource-saving-memory | 1 | 1 | This object's name is misleading. This object returns the maximum amount of additional memory, in bytes, that can be dedicated t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | default-vertical-black-resolution | 1 | 1 | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In La… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | default-horizontal-black-resolution | 1 | 1 | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 | default-page-protect | 1 | 1 | Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raste… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | default-lines-per-page | 1 | 1 | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | default-vmi | 1 | 1 | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | default-media-size, default-pdl | 1 | 1 | This indicates the default media size. A write of an unsupported value cases an Complete list of supported media sizes along wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | cold-reset-media-size | 1 | 1 | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 | default-media-name, default-orientation | 1 | 1 | Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | reprint, context-sensitive-pdl-selection | 1 | 1 | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the devi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.37 | wide-a4 | 1 | 1 | Returns or changes the wide A4 logical page size setting. If eOn, then the margins/printable area of A4 paper will be changed to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.38 | dark-courier | 1 | 1 | Returns or changes the dark Courier setting. If eOn, then the Courier font used will approximate the same darkness as the LaserJ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 | default-bits-per-pixel | 1 | 1 | Controls the number of levels used (per pixel) when printing grayscale or color images. |