Returns or changes the value of the default horizontal
black resolution. The units are dots per inch.
Additional information:
In the Laserjet 3200, changing this OID
also causes DEFAULT-VERTICAL-BLACK RESOLUTION to change.
DEFAULT-HORIZONTAL-BLACK-RESOLUTION and
DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the
same. The supported values are 300, 600 and 1200.
Setting to an unsupported value causes the printer to
substitute in a snap value and to return
The snap values are as follows:
<450 snaps to 300
>=450 and <900 snaps to 600
>=900 snaps to 1200
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
Returns or changes the value of the default horizontal
black resolution. The units are dots per inch.
Additional information:
In LaserJet 5Si changing this OID also causes
DEFAULT- VERTICAL-BLACK RESOLUTION to change.
DEFAULT- HORIZONTAL-BLACK-RESOLUTION and
DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the
same. The supported values are 300 and 600.
Setting to an unsupported value causes the printer
to substitute in a snap value and to
return
The snap values are as follow:
<450 snap to 300
>=450 snap to 600
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
default-horizontal-black-resolution OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In the Laserjet 3200, changing this OID also causes DEFAULT-VERTICAL-BLACK RESOLUTION to change. DEFAULT-HORIZONTAL-BLACK-RESOLUTION and DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the same. The supported values are 300, 600 and 1200. Setting to an unsupported value causes the printer to substitute in a snap value and to return
status. The snap values are as follows: <450 snaps to 300 >=450 and <900 snaps to 600 >=900 snaps to 1200" ::= { settings-pdl 9 }
default-horizontal-black-resolution OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In LaserJet 5Si changing this OID also causes DEFAULT- VERTICAL-BLACK RESOLUTION to change. DEFAULT- HORIZONTAL-BLACK-RESOLUTION and DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the same. The supported values are 300 and 600. Setting to an unsupported value causes the printer to substitute in a snap value and to return
status. The snap values are as follow: <450 snap to 300 >=450 snap to 600" ::= { settings-pdl 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9.0 | default-horizontal-black-resolution | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.2 | default-orientation | 1 | 1 | Returns or changes the default orientation. The list of supported values should be documented in the device POS. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | default-copies | 1 | 1 | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 | form-feed | 1 | 1 | Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6 | resource-saving | 1 | 1 | Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another P… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.7 | maximum-resource-saving-memory | 1 | 1 | This object's name is misleading. This object returns the maximum amount of additional memory, in bytes, that can be dedicated t… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | default-vertical-black-resolution | 1 | 1 | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In La… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 | default-page-protect | 1 | 1 | Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raste… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | default-lines-per-page | 1 | 1 | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | default-vmi | 1 | 1 | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | default-media-size, default-pdl | 1 | 1 | This indicates the default media size. A write of an unsupported value cases an Complete list of supported media sizes along wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | cold-reset-media-size | 1 | 1 | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 | default-media-name, default-orientation | 1 | 1 | Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | reprint, context-sensitive-pdl-selection | 1 | 1 | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the devi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.37 | wide-a4 | 1 | 1 | Returns or changes the wide A4 logical page size setting. If eOn, then the margins/printable area of A4 paper will be changed to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.38 | dark-courier | 1 | 1 | Returns or changes the dark Courier setting. If eOn, then the Courier font used will approximate the same darkness as the LaserJ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 | default-bits-per-pixel | 1 | 1 | Controls the number of levels used (per pixel) when printing grayscale or color images. |