This object's name is misleading. This object returns
the maximum amount of additional memory, in bytes, that
can be dedicated to holding PDL permanent soft
resources.
Additional information:
For a PCL-only printer, the value of this
object is zero (all resource saving memory is dedicated
to PCL).
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
Returns the maximum amount of additional memory, in
bytes, that can be dedicated to holding PDL permanent
soft resources.
Additional information:
The following numbers assume that IO-BUFFERING=eOff;
if IO-BUFFERING<>eOff, the following numbers will be reduced by the value of
IO-BUFFER-SIZE.
Memory for resource saving is allocated in increments of 102400 bytes.
Therefore, for each 1M (1048576 bytes) of memory added to the printer, 1024000
bytes are made available to resource saving (and I/O buffering) and 24576
bytes are retained until an additional 102400 byte block can be made
available. The value reported by this object is always rounded down to the
nearest multiple of 102400.
For a PCL-only printer, the value of this object is zero (all resource saving
memory is dedicated to PCL).
If PostScript is installed without a duplex unit, the value of this object is
as follows:
Zero if <13M memory is installed.
1024000 if 13M memory is installed and RESOURCE-SAVING=eOff.
1024000 if 13M memory is installed and RESOURCE-SAVING=eOn (note that this
value will be reduced by the amount of memory allocated to
PCL-RESOURCE-SAVING-MEMORY-SIZE and POSTSCRIPT-RESOURCE-SAVING-MEMORY-SIZE).
204800 if 13M memory is installed and RESOURCE-SAVING=eAuto.
When RESOURCE-SAVING=eAuto, 204800 bytes of each 1M over 13M memory installed
are allocated to PCL and PostScript (102400 each) with the remaining bytes
added to this object.
When RESOURCE-SAVING=eOn or eOff, all bytes over 13M memory installed are
added to this object.
If PostScript is installed with a duplex unit, the value of this object is as
follows:
Zero if <24M memory is installed.
1024000 if 24M memory is installed and RESOURCE-SAVING=eOff.
1024000 if 24M memory is installed and RESOURCE-SAVING=eOn (note that this
value will be reduced by the amount of memory allocated to
PCL-RESOURCE-SAVING-MEMORY-SIZE and POSTSCRIPT-RESOURCE-SAVING-MEMORY-SIZE).
204800 if 24M memory is installed and RESOURCE-SAVING=eAuto.
When RESOURCE-SAVING=eAuto, 204800 bytes of each 1M over 24M memory installed
are allocated to PCL and PostScript (102400 each) with the remaining bytes
added to this object.
When RESOURCE-SAVING=eOn or eOff, all bytes over 24M memory installed are
added to this object.
The above listed values returned by this object will be reduced by the amount
of memory added to PCL-RESOURCE-SAVING-MEMORY-SIZE and
POSTSCRIPT-RESOURCE-SAVING-MEMORY-SIZE when RESOURCE-SAVING=eOn.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
maximum-resource-saving-memory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object's name is misleading. This object returns the maximum amount of additional memory, in bytes, that can be dedicated to holding PDL permanent soft resources. Additional information: For a PCL-only printer, the value of this object is zero (all resource saving memory is dedicated to PCL)." ::= { settings-pdl 7 }
maximum-resource-saving-memory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Returns the maximum amount of additional memory, in bytes, that can be dedicated to holding PDL permanent soft resources. Additional information: The following numbers assume that IO-BUFFERING=eOff; if IO-BUFFERING<>eOff, the following numbers will be reduced by the value of IO-BUFFER-SIZE. Memory for resource saving is allocated in increments of 102400 bytes. Therefore, for each 1M (1048576 bytes) of memory added to the printer, 1024000 bytes are made available to resource saving (and I/O buffering) and 24576 bytes are retained until an additional 102400 byte block can be made available. The value reported by this object is always rounded down to the nearest multiple of 102400. For a PCL-only printer, the value of this object is zero (all resource saving memory is dedicated to PCL). If PostScript is installed without a duplex unit, the value of this object is as follows: Zero if <13M memory is installed. 1024000 if 13M memory is installed and RESOURCE-SAVING=eOff. 1024000 if 13M memory is installed and RESOURCE-SAVING=eOn (note that this value will be reduced by the amount of memory allocated to PCL-RESOURCE-SAVING-MEMORY-SIZE and POSTSCRIPT-RESOURCE-SAVING-MEMORY-SIZE). 204800 if 13M memory is installed and RESOURCE-SAVING=eAuto. When RESOURCE-SAVING=eAuto, 204800 bytes of each 1M over 13M memory installed are allocated to PCL and PostScript (102400 each) with the remaining bytes added to this object. When RESOURCE-SAVING=eOn or eOff, all bytes over 13M memory installed are added to this object. If PostScript is installed with a duplex unit, the value of this object is as follows: Zero if <24M memory is installed. 1024000 if 24M memory is installed and RESOURCE-SAVING=eOff. 1024000 if 24M memory is installed and RESOURCE-SAVING=eOn (note that this value will be reduced by the amount of memory allocated to PCL-RESOURCE-SAVING-MEMORY-SIZE and POSTSCRIPT-RESOURCE-SAVING-MEMORY-SIZE). 204800 if 24M memory is installed and RESOURCE-SAVING=eAuto. When RESOURCE-SAVING=eAuto, 204800 bytes of each 1M over 24M memory installed are allocated to PCL and PostScript (102400 each) with the remaining bytes added to this object. When RESOURCE-SAVING=eOn or eOff, all bytes over 24M memory installed are added to this object. The above listed values returned by this object will be reduced by the amount of memory added to PCL-RESOURCE-SAVING-MEMORY-SIZE and POSTSCRIPT-RESOURCE-SAVING-MEMORY-SIZE when RESOURCE-SAVING=eOn." ::= { settings-pdl 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.7.0 | maximum-resource-saving-memory | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.2 | default-orientation | 1 | 1 | Returns or changes the default orientation. The list of supported values should be documented in the device POS. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.4 | default-copies | 1 | 1 | Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.5 | form-feed | 1 | 1 | Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.6 | resource-saving | 1 | 1 | Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another P… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.8 | default-vertical-black-resolution | 1 | 1 | Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In La… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.9 | default-horizontal-black-resolution | 1 | 1 | Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.10 | default-page-protect | 1 | 1 | Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raste… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.11 | default-lines-per-page | 1 | 1 | Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.12 | default-vmi | 1 | 1 | Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.13 | default-media-size, default-pdl | 1 | 1 | This indicates the default media size. A write of an unsupported value cases an Complete list of supported media sizes along wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.19 | cold-reset-media-size | 1 | 1 | Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.22 | default-media-name, default-orientation | 1 | 1 | Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This s… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.36 | reprint, context-sensitive-pdl-selection | 1 | 1 | Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the devi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.37 | wide-a4 | 1 | 1 | Returns or changes the wide A4 logical page size setting. If eOn, then the margins/printable area of A4 paper will be changed to… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.38 | dark-courier | 1 | 1 | Returns or changes the dark Courier setting. If eOn, then the Courier font used will approximate the same darkness as the LaserJ… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.1.39 | default-bits-per-pixel | 1 | 1 | Controls the number of levels used (per pixel) when printing grayscale or color images. |