Line coding. The choices for this field are:
B8ZS - Binary 8 Zeros Suppress. Used with more recent
ESF T1 framing. Commonly used in 64 Kbps,
fractional T1 and Primary Rate ISDN lines.
Valid for T1.
AMI - Alternate Mark Inversion. Usually the choice
with D4 framing. Common in existing 56 Kbps
DDS type circuits.
Valid for T1 and E1.
HDB3 - High Density Bipolar, 3 zeros.
Valid for E1 and E3.
B3ZS - Binary 3 Zeros Suppress.
Valid for T3.
This field applies only to the T1, E1 and T3/DS-3 WanProbes.
Parsed from file lanprobe.txt
Company: None
Module: PROBE-MIB
Line coding. The choices for this field are:
B8ZS - Binary 8 Zeros Suppress. Used with more recent
ESF T1 framing. Commonly used in 64 Kbps,
fractional T1 and Primary Rate ISDN lines.
Valid for T1.
AMI - Alternate Mark Inversion. Usually the choice
with D4 framing. Common in existing 56 Kbps
DDS type circuits.
Valid for T1 and E1.
HDB3 - High Density Bipolar, 3 zeros.
Valid for E1 and E3.
B3ZS - Binary 3 Zeros Suppress.
Valid for T3.
This field applies only to the T1, E1 and T3/DS-3 WanProbes.
Parsed from file PROBE-MIB.mib
Module: PROBE-MIB
Vendor: Hewlett-Packard
Module: PROBE-MIB
[Automatically extracted from oidview.com]
netConfigLineCode OBJECT-TYPE SYNTAX INTEGER { b8zs(1), ami(2), hdb3(3), b3zs(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Line coding. The choices for this field are: B8ZS - Binary 8 Zeros Suppress. Used with more recent ESF T1 framing. Commonly used in 64 Kbps, fractional T1 and Primary Rate ISDN lines. Valid for T1. AMI - Alternate Mark Inversion. Usually the choice with D4 framing. Common in existing 56 Kbps DDS type circuits. Valid for T1 and E1. HDB3 - High Density Bipolar, 3 zeros. Valid for E1 and E3. B3ZS - Binary 3 Zeros Suppress. Valid for T3. This field applies only to the T1, E1 and T3/DS-3 WanProbes." ::= { netConfigEntry 11 }
netConfigLineCode OBJECT-TYPE SYNTAX INTEGER { b8zs(1), ami(2), hdb3(3), b3zs(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Line coding. The choices for this field are: B8ZS - Binary 8 Zeros Suppress. Used with more recent ESF T1 framing. Commonly used in 64 Kbps, fractional T1 and Primary Rate ISDN lines. Valid for T1. AMI - Alternate Mark Inversion. Usually the choice with D4 framing. Common in existing 56 Kbps DDS type circuits. Valid for T1 and E1. HDB3 - High Density Bipolar, 3 zeros. Valid for E1 and E3. B3ZS - Binary 3 Zeros Suppress. Valid for T3. This field applies only to the T1, E1 and T3/DS-3 WanProbes." ::= { netConfigEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.6.1.1.1 | netConfigIfIndex | 0 | 0 | The value of this object uniquely identifies the physical interface on this device for which this entry contains configuration pa… |
1.3.6.1.4.1.11.2.4.6.1.1.2 | netConfigIfSpeed | 0 | 0 | The value of this object indicates the speed of the media. This is equivalent to the MIB-2 object ifSpeed. |
1.3.6.1.4.1.11.2.4.6.1.1.3 | netConfigIPAddress | 0 | 0 | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConf… |
1.3.6.1.4.1.11.2.4.6.1.1.4 | netConfigSubnetMask | 0 | 0 | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netCon… |
1.3.6.1.4.1.11.2.4.6.1.1.5 | netConfigRingNumber | 0 | 0 | The value of this object uniquely identifies the physical ring number on which the probe resides. This variable is only meaningfu… |
1.3.6.1.4.1.11.2.4.6.1.1.6 | netConfigPortType | 0 | 0 | This object indicates whether or not the port for this row (indicated in netConfigIfIndex) is monitor only or can transmit as wel… |
1.3.6.1.4.1.11.2.4.6.1.1.7 | netConfigDefaultGateway | 0 | 0 | The IP Address of the default gateway for this Net interface. |
1.3.6.1.4.1.11.2.4.6.1.1.8 | netConfigPhysicalConnector | 0 | 0 | The value of this object indicates the type of physical connector which is currently being used to connect the interface to the n… |
1.3.6.1.4.1.11.2.4.6.1.1.9 | netConfigLinkSpeed | 0 | 0 | Indicates the speed of the media (in one direction). For Fast Ethernet auto-negotiation and Token-Ring speed auto-detection, this… |
1.3.6.1.4.1.11.2.4.6.1.1.10 | netConfigDuplex | 0 | 0 | Indicates whether the interface supports half or full duplex mode. When LinkSpeed is set to auto-negotiate, this field has no ef… |
1.3.6.1.4.1.11.2.4.6.1.1.12 | netConfigFramingType | 0 | 0 | Framing type. The choices for this field are: ESF - Extended Super Frame (24 frames/ESF). Valid for T1. D4 -… |
1.3.6.1.4.1.11.2.4.6.1.1.13 | netConfigChannelRate | 0 | 0 | Channel Rate. The choices for this field are: 56K - Valid for T1. 64K - Valid for T1/E1. 1536bps - Valid for … |
1.3.6.1.4.1.11.2.4.6.1.1.14 | netConfigDataChannel | 0 | 0 | This integer represents the ORed bit fields which can be set to indicate that the probe should monitor the specified channel on t… |
1.3.6.1.4.1.11.2.4.6.1.1.15 | netConfigDataSense | 0 | 0 | Indicates whether the bits on the channel(s) being tested are inverted. A Mark is a signal pulse on the line. A Space is a bit … |
1.3.6.1.4.1.11.2.4.6.1.1.16 | netConfigLinkLayerType | 0 | 0 | Indicates the type of link layer analysis to be performed on the incoming data. This field applies only to WanProbes and ATMProbes |
1.3.6.1.4.1.11.2.4.6.1.1.17 | netConfigNetworkInterface | 0 | 0 | ATM network interface addressing mode. Valid values for this field are: NNI - Network to Network Interface. The Network to Networ… |
1.3.6.1.4.1.11.2.4.6.1.1.18 | netConfigCellSynchronization | 0 | 0 | ATM network interface addressing mode. Valid values for this field are: HEC - The Header Error Control (DEC) is an 8-bit field … |
1.3.6.1.4.1.11.2.4.6.1.1.19 | netConfigReceiverMode | 0 | 0 | Line: When monitoring, the selected challes are presented as the line and equipment signals for decoding and statistics. All cha… |
1.3.6.1.4.1.11.2.4.6.1.1.20 | netConfigMaximumFrameSize | 0 | 0 | The size of the buffer to be allocated at the physical layer for the reception of a frame from the network. Any frames which ar… |