Indicates whether the bits on the channel(s) being tested
are inverted. A Mark is a signal pulse on the line. A
Space is a bit time with no pulse. The choices for this
field are:
Normal - Indicates that the bits are not inverted;
therefore a Mark is represented by a binary 1.
Inverted - A Mark is represented by a binary 0.
NRZI - Non-Return to Zero Invert (on zeros), bit
timing follows derived line timing. Successive
Marks or Spaces represent binary 1. Changes from
Mark to Space or from Space to Mark represent a
binary 0.
This field applies only to the T1, E1, V-Series, T3/DS-3 WanProbes.
Parsed from file lanprobe.txt
Company: None
Module: PROBE-MIB
Indicates whether the bits on the channel(s) being tested
are inverted. A Mark is a signal pulse on the line. A
Space is a bit time with no pulse. The choices for this
field are:
Normal - Indicates that the bits are not inverted;
therefore a Mark is represented by a binary 1.
Inverted - A Mark is represented by a binary 0.
NRZI - Non-Return to Zero Invert (on zeros), bit
timing follows derived line timing. Successive
Marks or Spaces represent binary 1. Changes from
Mark to Space or from Space to Mark represent a
binary 0.
This field applies only to the T1, E1, V-Series, T3/DS-3 WanProbes.
Parsed from file PROBE-MIB.mib
Module: PROBE-MIB
Vendor: Hewlett-Packard
Module: PROBE-MIB
[Automatically extracted from oidview.com]
netConfigDataSense OBJECT-TYPE SYNTAX INTEGER { normal(1), inverted(2), nrzi(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the bits on the channel(s) being tested are inverted. A Mark is a signal pulse on the line. A Space is a bit time with no pulse. The choices for this field are: Normal - Indicates that the bits are not inverted; therefore a Mark is represented by a binary 1. Inverted - A Mark is represented by a binary 0. NRZI - Non-Return to Zero Invert (on zeros), bit timing follows derived line timing. Successive Marks or Spaces represent binary 1. Changes from Mark to Space or from Space to Mark represent a binary 0. This field applies only to the T1, E1, V-Series, T3/DS-3 WanProbes." DEFVAL { 1 } ::= { netConfigEntry 15 }
netConfigDataSense OBJECT-TYPE SYNTAX INTEGER { normal(1), inverted(2), nrzi(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the bits on the channel(s) being tested are inverted. A Mark is a signal pulse on the line. A Space is a bit time with no pulse. The choices for this field are: Normal - Indicates that the bits are not inverted; therefore a Mark is represented by a binary 1. Inverted - A Mark is represented by a binary 0. NRZI - Non-Return to Zero Invert (on zeros), bit timing follows derived line timing. Successive Marks or Spaces represent binary 1. Changes from Mark to Space or from Space to Mark represent a binary 0. This field applies only to the T1, E1, V-Series, T3/DS-3 WanProbes." DEFVAL { 1 } ::= { netConfigEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.6.1.1.1 | netConfigIfIndex | 0 | 0 | The value of this object uniquely identifies the physical interface on this device for which this entry contains configuration pa… |
1.3.6.1.4.1.11.2.4.6.1.1.2 | netConfigIfSpeed | 0 | 0 | The value of this object indicates the speed of the media. This is equivalent to the MIB-2 object ifSpeed. |
1.3.6.1.4.1.11.2.4.6.1.1.3 | netConfigIPAddress | 0 | 0 | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConf… |
1.3.6.1.4.1.11.2.4.6.1.1.4 | netConfigSubnetMask | 0 | 0 | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netCon… |
1.3.6.1.4.1.11.2.4.6.1.1.5 | netConfigRingNumber | 0 | 0 | The value of this object uniquely identifies the physical ring number on which the probe resides. This variable is only meaningfu… |
1.3.6.1.4.1.11.2.4.6.1.1.6 | netConfigPortType | 0 | 0 | This object indicates whether or not the port for this row (indicated in netConfigIfIndex) is monitor only or can transmit as wel… |
1.3.6.1.4.1.11.2.4.6.1.1.7 | netConfigDefaultGateway | 0 | 0 | The IP Address of the default gateway for this Net interface. |
1.3.6.1.4.1.11.2.4.6.1.1.8 | netConfigPhysicalConnector | 0 | 0 | The value of this object indicates the type of physical connector which is currently being used to connect the interface to the n… |
1.3.6.1.4.1.11.2.4.6.1.1.9 | netConfigLinkSpeed | 0 | 0 | Indicates the speed of the media (in one direction). For Fast Ethernet auto-negotiation and Token-Ring speed auto-detection, this… |
1.3.6.1.4.1.11.2.4.6.1.1.10 | netConfigDuplex | 0 | 0 | Indicates whether the interface supports half or full duplex mode. When LinkSpeed is set to auto-negotiate, this field has no ef… |
1.3.6.1.4.1.11.2.4.6.1.1.11 | netConfigLineCode | 0 | 0 | Line coding. The choices for this field are: B8ZS - Binary 8 Zeros Suppress. Used with more recent ESF T1 framing. Comm… |
1.3.6.1.4.1.11.2.4.6.1.1.12 | netConfigFramingType | 0 | 0 | Framing type. The choices for this field are: ESF - Extended Super Frame (24 frames/ESF). Valid for T1. D4 -… |
1.3.6.1.4.1.11.2.4.6.1.1.13 | netConfigChannelRate | 0 | 0 | Channel Rate. The choices for this field are: 56K - Valid for T1. 64K - Valid for T1/E1. 1536bps - Valid for … |
1.3.6.1.4.1.11.2.4.6.1.1.14 | netConfigDataChannel | 0 | 0 | This integer represents the ORed bit fields which can be set to indicate that the probe should monitor the specified channel on t… |
1.3.6.1.4.1.11.2.4.6.1.1.16 | netConfigLinkLayerType | 0 | 0 | Indicates the type of link layer analysis to be performed on the incoming data. This field applies only to WanProbes and ATMProbes |
1.3.6.1.4.1.11.2.4.6.1.1.17 | netConfigNetworkInterface | 0 | 0 | ATM network interface addressing mode. Valid values for this field are: NNI - Network to Network Interface. The Network to Networ… |
1.3.6.1.4.1.11.2.4.6.1.1.18 | netConfigCellSynchronization | 0 | 0 | ATM network interface addressing mode. Valid values for this field are: HEC - The Header Error Control (DEC) is an 8-bit field … |
1.3.6.1.4.1.11.2.4.6.1.1.19 | netConfigReceiverMode | 0 | 0 | Line: When monitoring, the selected challes are presented as the line and equipment signals for decoding and statistics. All cha… |
1.3.6.1.4.1.11.2.4.6.1.1.20 | netConfigMaximumFrameSize | 0 | 0 | The size of the buffer to be allocated at the physical layer for the reception of a frame from the network. Any frames which ar… |