The Internet address of the primary NetBIOS
nameserver host.
This MIB object corresponds to the NA/admin
Annex parameter 'pref_nbns1_addr'.
Parsed from file xylo-anx.mib.txt
Company: avaya
Module: XYLO-ANNEX-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
anxNbnServer1Addr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Internet address of the primary NetBIOS nameserver host. This MIB object corresponds to the NA/admin Annex parameter 'pref_nbns1_addr'." ::= { annexconfig 109 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.15.2.5.109.0 | anxNbnServer1Addr | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.15.2.5.59 | anxAppleTalkDefZones | 1 | 1 | The comma separated list of AppleTalk zone names used as a default when ACP cannot supply the actual set of zone names. Commas, … |
1.3.6.1.4.1.15.2.5.60 | anxAppleTalkNodeId | 1 | 1 | The AppleTalk node ID that the Annex first tries to use at startup. The address consists of two parts separated by a dot. The a… |
1.3.6.1.4.1.15.2.5.61 | anxAppleTalkZone | 1 | 1 | The zone name that the Annex first tries to use at startup. Spaces and double quotes can be used in the zone name by preceding t… |
1.3.6.1.4.1.15.2.5.62 | anxRipRouteList | 1 | 1 | A list of one to eight IP addresses in dotted address format (ddd.ddd.ddd.ddd) with comma separators between the addresses. This… |
1.3.6.1.4.1.15.2.5.63 | anxRipAuth | 1 | 1 | This is a clear text password that is used to authenticate the RIP packets. If the NULL string is specified, RIP packet authenti… |
1.3.6.1.4.1.15.2.5.64 | anxTcpKeepAlive | 1 | 1 | The default keep-alive value in minutes for connections to this Annex. If this is zero, use the default value of 120 minutes. I… |
1.3.6.1.4.1.15.2.5.65 | anxMaxModemCalls | 1 | 1 | The number of calls for which modem call accounting information is kept. The default value is 20. |
1.3.6.1.4.1.15.2.5.66 | anxOutputTtl | 1 | 1 | The value that is placed in the ttl field of all locally generated IP packets. The default value is 64. This MIB object correspo… |
1.3.6.1.4.1.15.2.5.67 | anxSessionLimit | 1 | 1 | The maximum number of sessions allowed on the Annex. The default is 1152. The maximum value that can be set is actually 16 time… |
1.3.6.1.4.1.15.2.5.68 | anxLockEnable | 1 | 1 | When enabled, allows any port user to use the LOCK DECServer command. The default value is enabled. This MIB object corresponds … |
1.3.6.1.4.1.15.2.5.69 | anxPasswdLimit | 1 | 1 | Defines the maximum number of times a user on a port can attempt to enter a password before the Annex resets the port. Setting t… |
1.3.6.1.4.1.15.2.5.70 | anxLatMulticastTimer | 1 | 1 | The elapsed time in seconds between transmission of service announcements. The default value is 30 seconds. This MIB object corre… |
1.3.6.1.4.1.15.2.5.71 | anxChapAuthname | 1 | 1 | The name associated with the Annex that is used to fill the Name field in the PPP CHAP challenge message. If this value is a zero… |
1.3.6.1.4.1.15.2.5.72 | anxTimeServerAddr | 1 | 1 | The Internet address of the time server host. This MIB object corresponds to the NA/admin Annex parameter 'time_server'. |
1.3.6.1.4.1.15.2.5.78 | anxMopPrefHost | 1 | 1 | The Ethernet address of the preferred MOP load/dump host. The default value is 0-0-0-0-0-0. Each part of the address must be a h… |
1.3.6.1.4.1.15.2.5.79 | anxMopPassword | 1 | 1 | The 8 byte hexadecimal MOP maintenance password. Each byte is represented by two hex digits in the string. This MIB object corre… |
1.3.6.1.4.1.15.2.5.80 | anxMopLoginPassword | 1 | 1 | The password for all ports where anxpCliInterface parameter is set to vci and anxpVciLoginPortPassword is enabled. The default v… |
1.3.6.1.4.1.15.2.5.81 | anxMopLoginPrompt | 1 | 1 | The password prompt for all ports whose anxpCliInterface parameter is set to vci. The default is '#'. This MIB object corresponds… |
1.3.6.1.4.1.15.2.5.82 | anxMopLoginTimer | 1 | 1 | The inactivity timer for all ports whose anxpCliInterface parameter is set to vci. Setting this object to 0 results in a default v… |
1.3.6.1.4.1.15.2.5.83 | anxIpxFrameType | 1 | 1 | The framing used for IPX protocol packets. The default value is raw802. This MIB object corresponds to the NA/admin Annex parame… |
1.3.6.1.4.1.15.2.5.89 | anxTmuxEnable | 1 | 1 | Controls whether the Annex uses TMux to multiplex small TCP or UDP packets into a single IP packet. The host must also support TM… |
1.3.6.1.4.1.15.2.5.90 | anxTmuxMaxHost | 1 | 1 | The maximum size of the Tmux address table. If the number of host addresses exceeds this limit, the oldest entry is flushed. The… |
1.3.6.1.4.1.15.2.5.91 | anxTmuxMaxMpx | 1 | 1 | The largest packet that can be placed in a TMux packet. Larger packets are not multiplexed but are directly passed to the IP lay… |
1.3.6.1.4.1.15.2.5.92 | anxTmuxDelay | 1 | 1 | The maximum amount of time used to accumulate smaller packets into a larger packet. When the time expires, the multiplexed packe… |
1.3.6.1.4.1.15.2.5.93 | anxAllowSets | 1 | 1 | This object will return whether SNMP manager(client) has access to read or read-write the MIB objects. The access is determined b… |
1.3.6.1.4.1.15.2.5.94 | anxDefaultImageName | 1 | 1 | The name of the image file that is loaded by default when booting the Annex. This MIB object corresponds to the NA/admin Annex pa… |
1.3.6.1.4.1.15.2.5.95 | anxLatGroupMap | 1 | 1 | This parameter is functionally identical to anxLatGroupVal and corresponds to the NA/admin Annex parameter 'group_value'. The synt… |
1.3.6.1.4.1.15.2.5.96 | anxLatVcliGroupMap | 1 | 1 | This parameter is functionally identical to anxLatVcliGroupVal and corresponds to the NA/admin Annex parameter 'vcli_groups'. The … |
1.3.6.1.4.1.15.2.5.97 | anxMultiSession | 1 | 1 | This parameter allows multisession operation to be managed on a terminal server basis. It tells that the server is configured for… |
1.3.6.1.4.1.15.2.5.98 | anxVcliInactivity | 1 | 1 | This parameter will specify the amount of time in minutes that a vcli session can remain inactive. If the timer expires, the anne… |
1.3.6.1.4.1.15.2.5.99 | anxDHCPServer1Addr | 1 | 1 | The Internet address of the primary DHCP server host. This MIB object corresponds to the NA/admin Annex parameter `pref_DHCP1_addr… |
1.3.6.1.4.1.15.2.5.100 | anxDHCPServer2Addr | 1 | 1 | The Internet address of the secondary DHCP server host. This MIB object corresponds to the NA/admin Annex parameter `pref_DHCP2_ad… |
1.3.6.1.4.1.15.2.5.101 | anxDHCPServerBcast | 1 | 1 | This parameter controls whether the Annex broadcasts a DHCPDISCOVER request if the preferred DHCP servers do not respond. This MIB… |
1.3.6.1.4.1.15.2.5.102 | anxConfigServer | 1 | 1 | The IP address of the host from where the config file was downloaded. |
1.3.6.1.4.1.15.2.5.103 | anxMaxChapChallInt | 1 | 1 | Specifies maximum value for the random CHAP re-challenge interval. Valid values are in range of 0 to 65535 seconds. Value of 0 … |
1.3.6.1.4.1.15.2.5.104 | anxMMPEnable | 1 | 1 | Enables or disables MMP in the Remote Annex. This MIB object corresponds to the NA/admin parameter mmp_enabled. |
1.3.6.1.4.1.15.2.5.106 | anxModulesDisabled | 1 | 1 | A bit array that contains the setting of selectable modules that are currently disabled. The allowable values are: 0x00000001 - ad… |
1.3.6.1.4.1.15.2.5.107 | securityProtocol | 1 | 1 | Values of this object can either be set to acp or radius to indicate which protocol this annex will use. Change of this parameter… |
1.3.6.1.4.1.15.2.5.108 | anxRipForceNewrt | 1 | 1 | When enabled, this parameter specifies the timeout value in seconds that the Annex waits for a router to send periodic RIP update… |
1.3.6.1.4.1.15.2.5.110 | anxNbnServer2Addr | 1 | 1 | The Internet address of the secondary NetBIOS nameserver host. This MIB object corresponds to the NA/admin Annex parameter 'pref_… |
1.3.6.1.4.1.15.2.5.111 | anxNameserverOverride | 1 | 1 | Indicates whether or not to override the PPP Client's nameserver address during IPCP negotiations. Set this to `enable' for serve… |
1.3.6.1.4.1.15.2.5.112 | anxBootpEnable | 1 | 1 | This parameter turns on and off the BOOTP relay functionality. This MIB object corresponds to the na/admin parameter 'bootp_enabl… |
1.3.6.1.4.1.15.2.5.113 | anxRoutePref | 1 | 1 | This parameter determines which routing protocol will take precedence in the routing table. The default value is 'rip'. This MIB… |
1.3.6.1.4.1.15.2.5.114 | anxRtableSize | 1 | 1 | This parameter sets the maximun number of different routes (address and mask) allowed in the routing table. The allowable values… |
1.3.6.1.4.1.15.2.5.115 | anxOppasswd | 1 | 1 | Setting this parameter changes the Annex's operator level password. Reading this parameter will return either |
... |