Setting this parameter changes the Annex's
operator level password. Reading this parameter
will return either
defined or
defined.
This MIB object corresponds to the NA/admin
Annex parameter 'oppasswd'.
Parsed from file xylo-anx.mib.txt
Company: avaya
Module: XYLO-ANNEX-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
anxOppasswd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Setting this parameter changes the Annex's operator level password. Reading this parameter will return either
if the password is defined or if the password is not defined. This MIB object corresponds to the NA/admin Annex parameter 'oppasswd'." ::= { annexconfig 115 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.15.2.5.115.0 | anxOppasswd | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.15.2.5.65 | anxMaxModemCalls | 1 | 1 | The number of calls for which modem call accounting information is kept. The default value is 20. |
1.3.6.1.4.1.15.2.5.66 | anxOutputTtl | 1 | 1 | The value that is placed in the ttl field of all locally generated IP packets. The default value is 64. This MIB object correspo… |
1.3.6.1.4.1.15.2.5.67 | anxSessionLimit | 1 | 1 | The maximum number of sessions allowed on the Annex. The default is 1152. The maximum value that can be set is actually 16 time… |
1.3.6.1.4.1.15.2.5.68 | anxLockEnable | 1 | 1 | When enabled, allows any port user to use the LOCK DECServer command. The default value is enabled. This MIB object corresponds … |
1.3.6.1.4.1.15.2.5.69 | anxPasswdLimit | 1 | 1 | Defines the maximum number of times a user on a port can attempt to enter a password before the Annex resets the port. Setting t… |
1.3.6.1.4.1.15.2.5.70 | anxLatMulticastTimer | 1 | 1 | The elapsed time in seconds between transmission of service announcements. The default value is 30 seconds. This MIB object corre… |
1.3.6.1.4.1.15.2.5.71 | anxChapAuthname | 1 | 1 | The name associated with the Annex that is used to fill the Name field in the PPP CHAP challenge message. If this value is a zero… |
1.3.6.1.4.1.15.2.5.72 | anxTimeServerAddr | 1 | 1 | The Internet address of the time server host. This MIB object corresponds to the NA/admin Annex parameter 'time_server'. |
1.3.6.1.4.1.15.2.5.78 | anxMopPrefHost | 1 | 1 | The Ethernet address of the preferred MOP load/dump host. The default value is 0-0-0-0-0-0. Each part of the address must be a h… |
1.3.6.1.4.1.15.2.5.79 | anxMopPassword | 1 | 1 | The 8 byte hexadecimal MOP maintenance password. Each byte is represented by two hex digits in the string. This MIB object corre… |
1.3.6.1.4.1.15.2.5.80 | anxMopLoginPassword | 1 | 1 | The password for all ports where anxpCliInterface parameter is set to vci and anxpVciLoginPortPassword is enabled. The default v… |
1.3.6.1.4.1.15.2.5.81 | anxMopLoginPrompt | 1 | 1 | The password prompt for all ports whose anxpCliInterface parameter is set to vci. The default is '#'. This MIB object corresponds… |
1.3.6.1.4.1.15.2.5.82 | anxMopLoginTimer | 1 | 1 | The inactivity timer for all ports whose anxpCliInterface parameter is set to vci. Setting this object to 0 results in a default v… |
1.3.6.1.4.1.15.2.5.83 | anxIpxFrameType | 1 | 1 | The framing used for IPX protocol packets. The default value is raw802. This MIB object corresponds to the NA/admin Annex parame… |
1.3.6.1.4.1.15.2.5.89 | anxTmuxEnable | 1 | 1 | Controls whether the Annex uses TMux to multiplex small TCP or UDP packets into a single IP packet. The host must also support TM… |
1.3.6.1.4.1.15.2.5.90 | anxTmuxMaxHost | 1 | 1 | The maximum size of the Tmux address table. If the number of host addresses exceeds this limit, the oldest entry is flushed. The… |
1.3.6.1.4.1.15.2.5.91 | anxTmuxMaxMpx | 1 | 1 | The largest packet that can be placed in a TMux packet. Larger packets are not multiplexed but are directly passed to the IP lay… |
1.3.6.1.4.1.15.2.5.92 | anxTmuxDelay | 1 | 1 | The maximum amount of time used to accumulate smaller packets into a larger packet. When the time expires, the multiplexed packe… |
1.3.6.1.4.1.15.2.5.93 | anxAllowSets | 1 | 1 | This object will return whether SNMP manager(client) has access to read or read-write the MIB objects. The access is determined b… |
1.3.6.1.4.1.15.2.5.94 | anxDefaultImageName | 1 | 1 | The name of the image file that is loaded by default when booting the Annex. This MIB object corresponds to the NA/admin Annex pa… |
1.3.6.1.4.1.15.2.5.95 | anxLatGroupMap | 1 | 1 | This parameter is functionally identical to anxLatGroupVal and corresponds to the NA/admin Annex parameter 'group_value'. The synt… |
1.3.6.1.4.1.15.2.5.96 | anxLatVcliGroupMap | 1 | 1 | This parameter is functionally identical to anxLatVcliGroupVal and corresponds to the NA/admin Annex parameter 'vcli_groups'. The … |
1.3.6.1.4.1.15.2.5.97 | anxMultiSession | 1 | 1 | This parameter allows multisession operation to be managed on a terminal server basis. It tells that the server is configured for… |
1.3.6.1.4.1.15.2.5.98 | anxVcliInactivity | 1 | 1 | This parameter will specify the amount of time in minutes that a vcli session can remain inactive. If the timer expires, the anne… |
1.3.6.1.4.1.15.2.5.99 | anxDHCPServer1Addr | 1 | 1 | The Internet address of the primary DHCP server host. This MIB object corresponds to the NA/admin Annex parameter `pref_DHCP1_addr… |
1.3.6.1.4.1.15.2.5.100 | anxDHCPServer2Addr | 1 | 1 | The Internet address of the secondary DHCP server host. This MIB object corresponds to the NA/admin Annex parameter `pref_DHCP2_ad… |
1.3.6.1.4.1.15.2.5.101 | anxDHCPServerBcast | 1 | 1 | This parameter controls whether the Annex broadcasts a DHCPDISCOVER request if the preferred DHCP servers do not respond. This MIB… |
1.3.6.1.4.1.15.2.5.102 | anxConfigServer | 1 | 1 | The IP address of the host from where the config file was downloaded. |
1.3.6.1.4.1.15.2.5.103 | anxMaxChapChallInt | 1 | 1 | Specifies maximum value for the random CHAP re-challenge interval. Valid values are in range of 0 to 65535 seconds. Value of 0 … |
1.3.6.1.4.1.15.2.5.104 | anxMMPEnable | 1 | 1 | Enables or disables MMP in the Remote Annex. This MIB object corresponds to the NA/admin parameter mmp_enabled. |
1.3.6.1.4.1.15.2.5.106 | anxModulesDisabled | 1 | 1 | A bit array that contains the setting of selectable modules that are currently disabled. The allowable values are: 0x00000001 - ad… |
1.3.6.1.4.1.15.2.5.107 | securityProtocol | 1 | 1 | Values of this object can either be set to acp or radius to indicate which protocol this annex will use. Change of this parameter… |
1.3.6.1.4.1.15.2.5.108 | anxRipForceNewrt | 1 | 1 | When enabled, this parameter specifies the timeout value in seconds that the Annex waits for a router to send periodic RIP update… |
1.3.6.1.4.1.15.2.5.109 | anxNbnServer1Addr | 1 | 1 | The Internet address of the primary NetBIOS nameserver host. This MIB object corresponds to the NA/admin Annex parameter 'pref_nb… |
1.3.6.1.4.1.15.2.5.110 | anxNbnServer2Addr | 1 | 1 | The Internet address of the secondary NetBIOS nameserver host. This MIB object corresponds to the NA/admin Annex parameter 'pref_… |
1.3.6.1.4.1.15.2.5.111 | anxNameserverOverride | 1 | 1 | Indicates whether or not to override the PPP Client's nameserver address during IPCP negotiations. Set this to `enable' for serve… |
1.3.6.1.4.1.15.2.5.112 | anxBootpEnable | 1 | 1 | This parameter turns on and off the BOOTP relay functionality. This MIB object corresponds to the na/admin parameter 'bootp_enabl… |
1.3.6.1.4.1.15.2.5.113 | anxRoutePref | 1 | 1 | This parameter determines which routing protocol will take precedence in the routing table. The default value is 'rip'. This MIB… |
1.3.6.1.4.1.15.2.5.114 | anxRtableSize | 1 | 1 | This parameter sets the maximun number of different routes (address and mask) allowed in the routing table. The allowable values… |
... |