Reference record for OID 1.3.6.1.4.1.164.3.1.4.1.1.1.15

parent: 1.3.6.1.4.1.164.3.1.4.1.1.1 (prtSInstEntry)
node code: 15
node name: prtSParamStatus
dot oid: 1.3.6.1.4.1.164.3.1.4.1.1.1.15
type: OBJECT-TYPE
asn1 oid: {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radWan(3) wanGen(1) prtWanGen(4) statPrtGen(1) prtSInstTable(1) prtSInstEntry(1) prtSParamStatus(15)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radWan(3) wanGen(1) prtWanGen(4) statPrtGen(1) prtSInstTable(1) prtSInstEntry(1) prtSParamStatus(15)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radWan(3) wanGen(1) prtWanGen(4) statPrtGen(1) prtSInstTable(1) prtSInstEntry(1) prtSParamStatus(15)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radWan(3) wanGen(1) prtWanGen(4) statPrtGen(1) prtSInstTable(1) prtSInstEntry(1) prtSParamStatus(15)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radWan(3) wanGen(1) prtWanGen(4) statPrtGen(1) prtSInstTable(1) prtSInstEntry(1) prtSParamStatus(15)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radWan(3) wanGen(1) prtWanGen(4) statPrtGen(1) prtSInstTable(1) prtSInstEntry(1) prtSParamStatus(15)}
iri oid: /iso/identified-organization/dod/internet/private/enterprise/rad/radWan/wanGen/prtWanGen/statPrtGen/prtSInstTable/prtSInstEntry/prtSParamStatus

/iso/identified-organization/dod/internet/private/enterprises/rad/radWan/wanGen/prtWanGen/statPrtGen/prtSInstTable/prtSInstEntry/prtSParamStatus

/iso/org/dod/internet/private/enterprise/rad/radWan/wanGen/prtWanGen/statPrtGen/prtSInstTable/prtSInstEntry/prtSParamStatus

/iso/org/dod/internet/private/enterprises/rad/radWan/wanGen/prtWanGen/statPrtGen/prtSInstTable/prtSInstEntry/prtSParamStatus

/iso/iso-identified-organization/dod/internet/private/enterprise/rad/radWan/wanGen/prtWanGen/statPrtGen/prtSInstTable/prtSInstEntry/prtSParamStatus

/iso/iso-identified-organization/dod/internet/private/enterprises/rad/radWan/wanGen/prtWanGen/statPrtGen/prtSInstTable/prtSInstEntry/prtSParamStatus
iri by oid_info: /ISO/Identified-Organization/6/1/4/1/164/3/1/4/1/1/1/15

Description by mibdepot

This object indicates Status of parameters specific to the
selected port.
- For a port that has no special status or is supported
by prtSExHsfStatTable - 1 Octet: 00hex

- For VC-6, VC-6A, VC-6AG, VC-6A/4LB, VC-12, VC-12/6, external ports - 1 Octet :
Bit 7 (MSB)..Bit 2 = 0 (NA)
Bit 1: Tx Signaling '1'=On ; '0'=Off
Bit 0 (LSB): Rx Signaling '1'=On ; '0'=Off

- For VC-2/R2(FXS) external ports - 1 Octet :
Bit - 7 6 5 4 3 2 1 0
|_| |_________|
Call Call State
Direction

Bit 7 (MSB) and Bit 6 : Call Direction
00 - Incoming
01 - Outgoing
Bit 5..Bit 0: Call State
000000 - Idle
000001 - Seized
000010 - Both-Way Conflict
000011 - Seizure Ack
000100 - Answered
000101 - Clear Backward
000110 - Clear Forward
000111 - Blocked
001000 - Fault
001001 - Fault 3
001010 - Fault 4
001011 - Fault 5
001100 - Fault 6
001101 - Fault 7

- For ML-20 external port - 3 Octets :
- 1 MS Octet will represent the Real Rate used:
Bit - 7 6 5 4 3 2 1 0
|___| |_______|
spare Rate

Valid values: 0..31, meaning 0..31x64Kbps
Invalid values: 32..255.
- 2 LS Octets will represent the Status of 7 Control
Signals:
Signal -
Bit - 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
Octet - 2 3 (LS)
'
Rest of the Signals (2 bits each) can have the following
values:
00=NA ; 01=unused ; 10=Off ; 11=On

- For ML-H/E1, ML-H/1/E1, ML-H/S/E1 internal port - 1 Octet
Bit - 7 6 5 4 3 2 1 0
|___________|
spare Mode of Operation

Mode of Operation: '1'=Central ; '0'=Remote

- For ACM external port - 1 Octet
Bit - 7 6 5 4 3 2 1 0
|_________|
spare Alarm State

Alarm State: according to bits 1,0:
00=NA ; 01=unused ; 10=Off ; 11=On

- For HS-U/1 external port - 1 Octet
Bit 7 6 5 4 3 2 1 0 LSB
|________| |__| |__|
spare modem sync

modem: 00 = other sync: 00 = not sync
01 = unknown 01 = sync
10 = ASMi-31/2 10 = reserved
11 = reserved 11 = reserved

- For MTML-2 external ports, MTML-E2 internal ports - 1 Octet :
Bit 7 6 5 4 3 2 1 0 LSB
|
BERT State
BERT State (Bit 0):
0 = OFF (BERT is not running on this port or any of its TSs/Bits)
1 = ON (BERT is running on this port OR on one of its TSs/Bits)

Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB

Description by circitor

Information by oid_info

Vendor: Rad Data Communications Ltd.
Module: DACS-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

prtSParamStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Octet: 00hex - For VC-6, VC-6A, VC-6AG, VC-6A/4LB, VC-12, VC-12/6, external ports - 1 Octet : Bit 7 (MSB)..Bit 2 = 0 (NA) Bit 1: Tx Signaling '1'=On ; '0'=Off Bit 0 (LSB): Rx Signaling '1'=On ; '0'=Off - For VC-2/R2(FXS) external ports - 1 Octet : Bit - 7 6 5 4 3 2 1 0 |_| |_________| Call Call State Direction Bit 7 (MSB) and Bit 6 : Call Direction 00 - Incoming 01 - Outgoing Bit 5..Bit 0: Call State 000000 - Idle 000001 - Seized 000010 - Both-Way Conflict 000011 - Seizure Ack 000100 - Answered 000101 - Clear Backward 000110 - Clear Forward 000111 - Blocked 001000 - Fault 001001 - Fault 3 001010 - Fault 4 001011 - Fault 5 001100 - Fault 6 001101 - Fault 7 - For ML-20 external port - 3 Octets : - 1 MS Octet will represent the Real Rate used: Bit - 7 6 5 4 3 2 1 0 |___| |_______| spare Rate Valid values: 0..31, meaning 0..31x64Kbps Invalid values: 32..255. - 2 LS Octets will represent the Status of 7 Control Signals: Signal - Bit - 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 Octet - 2 3 (LS) ' Rest of the Signals (2 bits each) can have the following values: 00=NA ; 01=unused ; 10=Off ; 11=On - For ML-H/E1, ML-H/1/E1, ML-H/S/E1 internal port - 1 Octet Bit - 7 6 5 4 3 2 1 0 |___________| spare Mode of Operation Mode of Operation: '1'=Central ; '0'=Remote - For ACM external port - 1 Octet Bit - 7 6 5 4 3 2 1 0 |_________| spare Alarm State Alarm State: according to bits 1,0: 00=NA ; 01=unused ; 10=Off ; 11=On - For HS-U/1 external port - 1 Octet Bit 7 6 5 4 3 2 1 0 LSB |________| |__| |__| spare modem sync modem: 00 = other sync: 00 = not sync 01 = unknown 01 = sync 10 = ASMi-31/2 10 = reserved 11 = reserved 11 = reserved - For MTML-2 external ports, MTML-E2 internal ports - 1 Octet : Bit 7 6 5 4 3 2 1 0 LSB | BERT State BERT State (Bit 0): 0 = OFF (BERT is not running on this port or any of its TSs/Bits) 1 = ON (BERT is running on this port OR on one of its TSs/Bits)" ::= { prtSInstEntry 15}

Information by circitor

First Registration Authority (recovered by parent 1.3.6.1.4.1.164)

Brighitte Shalom

Current Registration Authority (recovered by parent 1.3.6.1.4.1.164)

Smadar Tauber

Brothers (14)

OID	Name	Description
1.3.6.1.4.1.164.3.1.4.1.1.1.1	prtSInstSltIdx	This attribute indicates a unique number to identify the slot where the card is inserted. In the ?004 Unit the entries io6(10)..i…
1.3.6.1.4.1.164.3.1.4.1.1.1.2	prtSInstPrtIdx	This attribute indicates a unique number to identify a port in a specific card. The valid ports depend on the installed card: the …
1.3.6.1.4.1.164.3.1.4.1.1.1.3	prtSInstPrtType	This attribute describes the type of the designated port. In MX 3000 only external & internal options are used. All the other opt…
1.3.6.1.4.1.164.3.1.4.1.1.1.4	prtSInstIfIndex	This attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same…
1.3.6.1.4.1.164.3.1.4.1.1.1.5	prtSActiveStatus	This attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) …
1.3.6.1.4.1.164.3.1.4.1.1.1.6	prtSAlrStatus	Indicates the alarm state in the port(ch) agent level. This attribute will be set to: critical(7) - when there is at least one ac…
1.3.6.1.4.1.164.3.1.4.1.1.1.7	prtSMaskedAlrStat	Indicates the alarm state in the port(ch) agent level, including Masked alarms. This attribute will be set to: critical(7) - when …
1.3.6.1.4.1.164.3.1.4.1.1.1.8	prtSClearAlrCmd	Setting this attribute to on(3) enforces a clear operation of the alarm status events in the given port. The clear operation will…
1.3.6.1.4.1.164.3.1.4.1.1.1.9	prtSTestMask	This is a mask which indicates which tests from the 'prtSTstCmd' list are allowed for the requested port. If a specific test is a…
1.3.6.1.4.1.164.3.1.4.1.1.1.10	prtSTstCmd	Setting this attribute to any of the above values will initiate a test on the specific port if the operation is legal. If the ope…
1.3.6.1.4.1.164.3.1.4.1.1.1.11	prtSTstDuration	This attribute indicates the maximum duration of executing a test on the specific port. This entry applies to all the test operat…
1.3.6.1.4.1.164.3.1.4.1.1.1.12	prtSBertClrCmd	Setting this attribute initiates bert count clear operation. It is valid only when bert test is active on the specific port.
1.3.6.1.4.1.164.3.1.4.1.1.1.13	prtSBertTstRslt	This attribute indicates the number of Bit Error Rate indicated during the BERT operation. It is valid only when bert test is act…
1.3.6.1.4.1.164.3.1.4.1.1.1.14	prtSInterfaceType	This attribute indicates a unique HW interface type of the selected port.