Indicates the alarm state in the port(ch) agent level.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
Indicates the alarm state in the port(ch) agent level.
This attribute will be set to:
critical(7) - when there is at least one active (state ON)
critical alarm,
otherwise it will be set to
major(5) - when there is at least one active (state ON)
major alarm,
otherwise it will be set to
minor(4) - if there is at least one active (state ON) minor
alarm,
otherwise it will be set to
warning(6) - if there is at least one active (state ON)
warning alarm,
otherwise it will be set to
event(3) - if there was at least one alarm event (including
state on,off events) since the last clear operation.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications Ltd.
Module: DACS-MIB
[Automatically extracted from oidview.com]
prtSAlrStatus OBJECT-TYPE SYNTAX INTEGER { off (2), event (3), minor (4), major (5), warning (6), critical (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the alarm state in the port(ch) agent level. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation." ::= { prtSInstEntry 6}
prtSAlrStatus OBJECT-TYPE SYNTAX INTEGER { off (2), event (3), minor (4), major (5), warning (6), critical (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the alarm state in the port(ch) agent level. This attribute will be set to: critical(7) - when there is at least one active (state ON) critical alarm, otherwise it will be set to major(5) - when there is at least one active (state ON) major alarm, otherwise it will be set to minor(4) - if there is at least one active (state ON) minor alarm, otherwise it will be set to warning(6) - if there is at least one active (state ON) warning alarm, otherwise it will be set to event(3) - if there was at least one alarm event (including state on,off events) since the last clear operation." ::= { prtSInstEntry 6}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.1.4.1.1.1.1 | prtSInstSltIdx | 0 | 0 | This attribute indicates a unique number to identify the slot where the card is inserted. In the ?004 Unit the entries io6(10)..i… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.2 | prtSInstPrtIdx | 0 | 0 | This attribute indicates a unique number to identify a port in a specific card. The valid ports depend on the installed card: the … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.3 | prtSInstPrtType | 0 | 0 | This attribute describes the type of the designated port. In MX 3000 only external & internal options are used. All the other opt… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.4 | prtSInstIfIndex | 0 | 0 | This attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.5 | prtSActiveStatus | 0 | 0 | This attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.7 | prtSMaskedAlrStat | 0 | 0 | Indicates the alarm state in the port(ch) agent level, including Masked alarms. This attribute will be set to: critical(7) - when … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.8 | prtSClearAlrCmd | 0 | 0 | Setting this attribute to on(3) enforces a clear operation of the alarm status events in the given port. The clear operation will… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.9 | prtSTestMask | 0 | 0 | This is a mask which indicates which tests from the 'prtSTstCmd' list are allowed for the requested port. If a specific test is a… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.10 | prtSTstCmd | 0 | 0 | Setting this attribute to any of the above values will initiate a test on the specific port if the operation is legal. If the ope… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.11 | prtSTstDuration | 0 | 0 | This attribute indicates the maximum duration of executing a test on the specific port. This entry applies to all the test operat… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.12 | prtSBertClrCmd | 0 | 0 | Setting this attribute initiates bert count clear operation. It is valid only when bert test is active on the specific port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.13 | prtSBertTstRslt | 0 | 0 | This attribute indicates the number of Bit Error Rate indicated during the BERT operation. It is valid only when bert test is act… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.14 | prtSInterfaceType | 0 | 0 | This attribute indicates a unique HW interface type of the selected port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.15 | prtSParamStatus | 0 | 0 | This object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported… |