This is a mask which indicates which tests from the
'prtSTstCmd' list are allowed for the requested port.
If a specific test is allowed, its respective bit
will be SET in the mask :
TEST BIT
local-loop 1
remote-loop 2
loc-and-rem-main-loops 3
remote-analog-loop 4
remote-digital-loop 5
rem-loop-on-ext-unit 6
bert 7
tone-injection 8
dlci local-loop 9
all dlci local-loop 10
dlci remote-loop 11
all dlci remote-loop 12
bert-and-rem-loop-on-rem-unit 13
rem-loop-on-rem-unit 14
block 15
backward-tone-inject 16
llb 17
rlb 18
ft1Enable 21
lbbd 22
lb1 23
lb2 24
llb-on-rem-unit 25
bert-on-rem-unit 26
bert-on-rem-and-llb-on-rem-unit 27
local-and-bert-on-rem-unit 28
local-loop-on-rem-unit 29
localBert 30
test-per-TS 31
e.g : If the return value is 3 -> 0000000000000011 ->
Bits 1 & 2 are set -> the allowed tests are :
local-loop
remote-loop
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This is a mask which indicates which tests from the
'prtSTstCmd' list are allowed for the requested port.
If a specific test is allowed, its respective bit
will be SET in the mask :
TEST BIT
local-loop 1
remote-loop 2
loc-and-rem-main-loops 3
remote-analog-loop 4
remote-digital-loop 5
rem-loop-on-ext-unit 6
bert 7
tone-injection 8
dlci local-loop 9
all dlci local-loop 10
dlci remote-loop 11
all dlci remote-loop 12
bert-and-rem-loop-on-rem-unit 13
rem-loop-on-rem-unit 14
block 15
backward-tone-inject 16
llb 17
rlb 18
ft1Enable 21
lbbd 22
lb1 23
lb2 24
llb-on-rem-unit 25
bert-on-rem-unit 26
bert-on-rem-and-llb-on-rem-unit 27
local-and-bert-on-rem-unit 28
local-loop-on-rem-unit 29
localBert 30
test-per-TS 31
e.g : If the return value is 3 -> 0000000000000011 ->
Bits 1 & 2 are set -> the allowed tests are :
local-loop
remote-loop
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications Ltd.
Module: DACS-MIB
[Automatically extracted from oidview.com]
prtSTestMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a mask which indicates which tests from the 'prtSTstCmd' list are allowed for the requested port. If a specific test is allowed, its respective bit will be SET in the mask : TEST BIT local-loop 1 remote-loop 2 loc-and-rem-main-loops 3 remote-analog-loop 4 remote-digital-loop 5 rem-loop-on-ext-unit 6 bert 7 tone-injection 8 dlci local-loop 9 all dlci local-loop 10 dlci remote-loop 11 all dlci remote-loop 12 bert-and-rem-loop-on-rem-unit 13 rem-loop-on-rem-unit 14 block 15 backward-tone-inject 16 llb 17 rlb 18 ft1Enable 21 lbbd 22 lb1 23 lb2 24 llb-on-rem-unit 25 bert-on-rem-unit 26 bert-on-rem-and-llb-on-rem-unit 27 local-and-bert-on-rem-unit 28 local-loop-on-rem-unit 29 localBert 30 test-per-TS 31 e.g : If the return value is 3 -> 0000000000000011 -> Bits 1 & 2 are set -> the allowed tests are : local-loop remote-loop " ::= { prtSInstEntry 9}
prtSTestMask OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is a mask which indicates which tests from the 'prtSTstCmd' list are allowed for the requested port. If a specific test is allowed, its respective bit will be SET in the mask : TEST BIT local-loop 1 remote-loop 2 loc-and-rem-main-loops 3 remote-analog-loop 4 remote-digital-loop 5 rem-loop-on-ext-unit 6 bert 7 tone-injection 8 dlci local-loop 9 all dlci local-loop 10 dlci remote-loop 11 all dlci remote-loop 12 bert-and-rem-loop-on-rem-unit 13 rem-loop-on-rem-unit 14 block 15 backward-tone-inject 16 llb 17 rlb 18 ft1Enable 21 lbbd 22 lb1 23 lb2 24 llb-on-rem-unit 25 bert-on-rem-unit 26 bert-on-rem-and-llb-on-rem-unit 27 local-and-bert-on-rem-unit 28 local-loop-on-rem-unit 29 localBert 30 test-per-TS 31 e.g : If the return value is 3 -> 0000000000000011 -> Bits 1 & 2 are set -> the allowed tests are : local-loop remote-loop " ::= { prtSInstEntry 9}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.1.4.1.1.1.1 | prtSInstSltIdx | 0 | 0 | This attribute indicates a unique number to identify the slot where the card is inserted. In the ?004 Unit the entries io6(10)..i… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.2 | prtSInstPrtIdx | 0 | 0 | This attribute indicates a unique number to identify a port in a specific card. The valid ports depend on the installed card: the … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.3 | prtSInstPrtType | 0 | 0 | This attribute describes the type of the designated port. In MX 3000 only external & internal options are used. All the other opt… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.4 | prtSInstIfIndex | 0 | 0 | This attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.5 | prtSActiveStatus | 0 | 0 | This attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.6 | prtSAlrStatus | 0 | 0 | Indicates the alarm state in the port(ch) agent level. This attribute will be set to: critical(7) - when there is at least one ac… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.7 | prtSMaskedAlrStat | 0 | 0 | Indicates the alarm state in the port(ch) agent level, including Masked alarms. This attribute will be set to: critical(7) - when … |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.8 | prtSClearAlrCmd | 0 | 0 | Setting this attribute to on(3) enforces a clear operation of the alarm status events in the given port. The clear operation will… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.10 | prtSTstCmd | 0 | 0 | Setting this attribute to any of the above values will initiate a test on the specific port if the operation is legal. If the ope… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.11 | prtSTstDuration | 0 | 0 | This attribute indicates the maximum duration of executing a test on the specific port. This entry applies to all the test operat… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.12 | prtSBertClrCmd | 0 | 0 | Setting this attribute initiates bert count clear operation. It is valid only when bert test is active on the specific port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.13 | prtSBertTstRslt | 0 | 0 | This attribute indicates the number of Bit Error Rate indicated during the BERT operation. It is valid only when bert test is act… |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.14 | prtSInterfaceType | 0 | 0 | This attribute indicates a unique HW interface type of the selected port. |
| 1.3.6.1.4.1.164.3.1.4.1.1.1.15 | prtSParamStatus | 0 | 0 | This object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported… |