This parameter represents the entry in the interface table. This
is described below.
Parsed from file orinoco.mib.txt
Company: None
Module: ORiNOCO-MIB
This parameter represents the entry in the interface table. This
is described below.
Parsed from file ORiNOCO-MIB.mib
Module: ORiNOCO-MIB
Vendor: Lucent Technologies
Module: ORiNOCO-MIB
[Automatically extracted from oidview.com]
oriWirelessIfPropertiesEntry OBJECT-TYPE SYNTAX OriWirelessIfPropertiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter represents the entry in the interface table. This is described below." INDEX { oriWirelessIfPropertiesIndex } ::= { oriWirelessIfPropertiesTable 1 }
oriWirelessIfPropertiesEntry OBJECT-TYPE SYNTAX OriWirelessIfPropertiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This parameter represents the entry in the interface table. This is described below." INDEX { oriWirelessIfPropertiesIndex } ::= { oriWirelessIfPropertiesTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.1 | oriWirelessIfPropertiesIndex | 0 | 0 | This parameter represents a unique value for each interface. The value for each interface must remain constant at least from on… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.2 | oriWirelessIfNetworkName | 0 | 0 | This parameter represents the network name SSID) for this wireless interface. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.3 | oriWirelessIfMediumReservation | 0 | 0 | This parameter identifies the medium reservation value. The range for this parameter is 0 - 2347. The medium reservation speci… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.4 | oriWirelessIfInterferenceRobustness | 0 | 0 | This parameter enables or disables the interference robustness feature. The default value for this parameter is disable. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.5 | oriWirelessIfDTIMPeriod | 0 | 0 | This parameter represents the delivery traffic indication map period. This is the interval between the transmission of multicas… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.6 | oriWirelessIfChannel | 0 | 0 | This parameter represents the radio frequency channel for this wireless interface. The default value for this parameter is 3. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.7 | oriWirelessIfDistancebetweenAPs | 0 | 0 | This parameter identifies the distance between access points. The default value for this parameter should be large. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.8 | oriWirelessIfMulticastRate | 0 | 0 | This parameter identifies multicast rate of the wireless card. This is dependent on the distance between APs. This parameter is d… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.9 | oriWirelessIfClosedSystem | 0 | 0 | This parameter is used as a flag which identifies whether the device will accept association requests to this interface, for clie… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.10 | oriWirelessIfAllowedSupportedDataRates | 0 | 0 | This parameter reflects the transmit rates supported by the physical interface or radio card. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.11 | oriWirelessIfRegulatoryDomainList | 0 | 0 | This parameter specifies to which regulatory domain the interface belongs to. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.12 | oriWirelessIfAllowedChannels | 0 | 0 | This parameter reflects the radio frequency channels that the interface supports. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.13 | oriWirelessIfMACAddress | 0 | 0 | The MAC address of the ORiNOCO PC card inserted in the ORiNOCO device. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.14 | oriWirelessIfLoadBalancing | 0 | 0 | This object is used to configure the load balancing feature in the ORiNOCO device. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.15 | oriWirelessIfMediumDensityDistribution | 0 | 0 | This object is used to configure the medium density distribution feature in the ORiNOCO device. |