This parameter identifies multicast rate of the wireless card.
This is dependent on the distance between APs. This parameter is
directly correlated with the multicast rate. When this parameter
is set to small, the multicast rates can be 11 Mbit/s, 5.5 Mbit/s,
2 Mbit/s, and 1 Mbit/s. When this parameter is set to medium, the
allowed rates are 5.5 Mbit/s, 2 Mbit/s, 1 Mbit/s. When this
parameter is set to large, then the multicast rates can be set to
2 Mbits/s or 1 Mbits/s. The default value for this parameter
should be two Mbits/sec.
Parsed from file orinoco.mib.txt
Company: None
Module: ORiNOCO-MIB
This parameter identifies multicast rate of the wireless card.
This is dependent on the distance between APs. This parameter is
directly correlated with the multicast rate. When this parameter
is set to small, the multicast rates can be 11 Mbit/s, 5.5 Mbit/s,
2 Mbit/s, and 1 Mbit/s. When this parameter is set to medium, the
allowed rates are 5.5 Mbit/s, 2 Mbit/s, 1 Mbit/s. When this
parameter is set to large, then the multicast rates can be set to
2 Mbits/s or 1 Mbits/s. The default value for this parameter
should be two Mbits/sec.
Parsed from file ORiNOCO-MIB.mib
Module: ORiNOCO-MIB
Vendor: Lucent Technologies
Module: ORiNOCO-MIB
[Automatically extracted from oidview.com]
oriWirelessIfMulticastRate OBJECT-TYPE SYNTAX INTEGER { oneMegabitPerSecond(1), twoMegabitsPerSecond(2), fivedotfiveMegabitsPerSecond(3), elevenMegabitsPerSecond(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter identifies multicast rate of the wireless card. This is dependent on the distance between APs. This parameter is directly correlated with the multicast rate. When this parameter is set to small, the multicast rates can be 11 Mbit/s, 5.5 Mbit/s, 2 Mbit/s, and 1 Mbit/s. When this parameter is set to medium, the allowed rates are 5.5 Mbit/s, 2 Mbit/s, 1 Mbit/s. When this parameter is set to large, then the multicast rates can be set to 2 Mbits/s or 1 Mbits/s. The default value for this parameter should be two Mbits/sec." DEFVAL { twoMegabitsPerSecond } ::= { oriWirelessIfPropertiesEntry 8 }
oriWirelessIfMulticastRate OBJECT-TYPE SYNTAX INTEGER { oneMegabitPerSecond(1), twoMegabitsPerSecond(2), fivedotfiveMegabitsPerSecond(3), elevenMegabitsPerSecond(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter identifies multicast rate of the wireless card. This is dependent on the distance between APs. This parameter is directly correlated with the multicast rate. When this parameter is set to small, the multicast rates can be 11 Mbit/s, 5.5 Mbit/s, 2 Mbit/s, and 1 Mbit/s. When this parameter is set to medium, the allowed rates are 5.5 Mbit/s, 2 Mbit/s, 1 Mbit/s. When this parameter is set to large, then the multicast rates can be set to 2 Mbits/s or 1 Mbits/s. The default value for this parameter should be two Mbits/sec." DEFVAL { twoMegabitsPerSecond } ::= { oriWirelessIfPropertiesEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.1 | oriWirelessIfPropertiesIndex | 0 | 0 | This parameter represents a unique value for each interface. The value for each interface must remain constant at least from on… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.2 | oriWirelessIfNetworkName | 0 | 0 | This parameter represents the network name SSID) for this wireless interface. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.3 | oriWirelessIfMediumReservation | 0 | 0 | This parameter identifies the medium reservation value. The range for this parameter is 0 - 2347. The medium reservation speci… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.4 | oriWirelessIfInterferenceRobustness | 0 | 0 | This parameter enables or disables the interference robustness feature. The default value for this parameter is disable. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.5 | oriWirelessIfDTIMPeriod | 0 | 0 | This parameter represents the delivery traffic indication map period. This is the interval between the transmission of multicas… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.6 | oriWirelessIfChannel | 0 | 0 | This parameter represents the radio frequency channel for this wireless interface. The default value for this parameter is 3. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.7 | oriWirelessIfDistancebetweenAPs | 0 | 0 | This parameter identifies the distance between access points. The default value for this parameter should be large. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.9 | oriWirelessIfClosedSystem | 0 | 0 | This parameter is used as a flag which identifies whether the device will accept association requests to this interface, for clie… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.10 | oriWirelessIfAllowedSupportedDataRates | 0 | 0 | This parameter reflects the transmit rates supported by the physical interface or radio card. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.11 | oriWirelessIfRegulatoryDomainList | 0 | 0 | This parameter specifies to which regulatory domain the interface belongs to. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.12 | oriWirelessIfAllowedChannels | 0 | 0 | This parameter reflects the radio frequency channels that the interface supports. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.13 | oriWirelessIfMACAddress | 0 | 0 | The MAC address of the ORiNOCO PC card inserted in the ORiNOCO device. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.14 | oriWirelessIfLoadBalancing | 0 | 0 | This object is used to configure the load balancing feature in the ORiNOCO device. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.15 | oriWirelessIfMediumDensityDistribution | 0 | 0 | This object is used to configure the medium density distribution feature in the ORiNOCO device. |