This parameter represents the delivery traffic indication map
period. This is the interval between the transmission of multicast
frames on the wireless inteface. It is expressed in the Beacon
messages. The recommended default value for this parameter is 1.
Parsed from file orinoco.mib.txt
Company: None
Module: ORiNOCO-MIB
This parameter represents the delivery traffic indication map
period. This is the interval between the transmission of multicast
frames on the wireless inteface. It is expressed in the Beacon
messages. The recommended default value for this parameter is 1.
Parsed from file ORiNOCO-MIB.mib
Module: ORiNOCO-MIB
Vendor: Lucent Technologies
Module: ORiNOCO-MIB
[Automatically extracted from oidview.com]
oriWirelessIfDTIMPeriod OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter represents the delivery traffic indication map period. This is the interval between the transmission of multicast frames on the wireless inteface. It is expressed in the Beacon messages. The recommended default value for this parameter is 1." DEFVAL { 1 } ::= { oriWirelessIfPropertiesEntry 5 }
oriWirelessIfDTIMPeriod OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter represents the delivery traffic indication map period. This is the interval between the transmission of multicast frames on the wireless inteface. It is expressed in the Beacon messages. The recommended default value for this parameter is 1." DEFVAL { 1 } ::= { oriWirelessIfPropertiesEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.1 | oriWirelessIfPropertiesIndex | 0 | 0 | This parameter represents a unique value for each interface. The value for each interface must remain constant at least from on… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.2 | oriWirelessIfNetworkName | 0 | 0 | This parameter represents the network name SSID) for this wireless interface. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.3 | oriWirelessIfMediumReservation | 0 | 0 | This parameter identifies the medium reservation value. The range for this parameter is 0 - 2347. The medium reservation speci… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.4 | oriWirelessIfInterferenceRobustness | 0 | 0 | This parameter enables or disables the interference robustness feature. The default value for this parameter is disable. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.6 | oriWirelessIfChannel | 0 | 0 | This parameter represents the radio frequency channel for this wireless interface. The default value for this parameter is 3. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.7 | oriWirelessIfDistancebetweenAPs | 0 | 0 | This parameter identifies the distance between access points. The default value for this parameter should be large. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.8 | oriWirelessIfMulticastRate | 0 | 0 | This parameter identifies multicast rate of the wireless card. This is dependent on the distance between APs. This parameter is d… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.9 | oriWirelessIfClosedSystem | 0 | 0 | This parameter is used as a flag which identifies whether the device will accept association requests to this interface, for clie… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.10 | oriWirelessIfAllowedSupportedDataRates | 0 | 0 | This parameter reflects the transmit rates supported by the physical interface or radio card. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.11 | oriWirelessIfRegulatoryDomainList | 0 | 0 | This parameter specifies to which regulatory domain the interface belongs to. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.12 | oriWirelessIfAllowedChannels | 0 | 0 | This parameter reflects the radio frequency channels that the interface supports. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.13 | oriWirelessIfMACAddress | 0 | 0 | The MAC address of the ORiNOCO PC card inserted in the ORiNOCO device. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.14 | oriWirelessIfLoadBalancing | 0 | 0 | This object is used to configure the load balancing feature in the ORiNOCO device. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.15 | oriWirelessIfMediumDensityDistribution | 0 | 0 | This object is used to configure the medium density distribution feature in the ORiNOCO device. |