This parameter is used as a flag which identifies whether the
device will accept association requests to this interface, for
client stations configured with a network name of 'ANY'. When
this parameter is disabled, it will accept association requests
from client stations with a network name of 'ANY'. If this
parameter is set to enable then the interface will only accept
association requests that match the interface's network name. The
default value for this parameter is disable.
Parsed from file orinoco.mib.txt
Company: None
Module: ORiNOCO-MIB
This parameter is used as a flag which identifies whether the
device will accept association requests to this interface, for
client stations configured with a network name of 'ANY'. When
this parameter is disabled, it will accept association requests
from client stations with a network name of 'ANY'. If this
parameter is set to enable then the interface will only accept
association requests that match the interface's network name. The
default value for this parameter is disable.
Parsed from file ORiNOCO-MIB.mib
Module: ORiNOCO-MIB
Vendor: Lucent Technologies
Module: ORiNOCO-MIB
[Automatically extracted from oidview.com]
oriWirelessIfClosedSystem OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used as a flag which identifies whether the device will accept association requests to this interface, for client stations configured with a network name of 'ANY'. When this parameter is disabled, it will accept association requests from client stations with a network name of 'ANY'. If this parameter is set to enable then the interface will only accept association requests that match the interface's network name. The default value for this parameter is disable." DEFVAL { disable } ::= { oriWirelessIfPropertiesEntry 9 }
oriWirelessIfClosedSystem OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used as a flag which identifies whether the device will accept association requests to this interface, for client stations configured with a network name of 'ANY'. When this parameter is disabled, it will accept association requests from client stations with a network name of 'ANY'. If this parameter is set to enable then the interface will only accept association requests that match the interface's network name. The default value for this parameter is disable." DEFVAL { disable } ::= { oriWirelessIfPropertiesEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.1 | oriWirelessIfPropertiesIndex | 0 | 0 | This parameter represents a unique value for each interface. The value for each interface must remain constant at least from on… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.2 | oriWirelessIfNetworkName | 0 | 0 | This parameter represents the network name SSID) for this wireless interface. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.3 | oriWirelessIfMediumReservation | 0 | 0 | This parameter identifies the medium reservation value. The range for this parameter is 0 - 2347. The medium reservation speci… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.4 | oriWirelessIfInterferenceRobustness | 0 | 0 | This parameter enables or disables the interference robustness feature. The default value for this parameter is disable. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.5 | oriWirelessIfDTIMPeriod | 0 | 0 | This parameter represents the delivery traffic indication map period. This is the interval between the transmission of multicas… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.6 | oriWirelessIfChannel | 0 | 0 | This parameter represents the radio frequency channel for this wireless interface. The default value for this parameter is 3. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.7 | oriWirelessIfDistancebetweenAPs | 0 | 0 | This parameter identifies the distance between access points. The default value for this parameter should be large. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.8 | oriWirelessIfMulticastRate | 0 | 0 | This parameter identifies multicast rate of the wireless card. This is dependent on the distance between APs. This parameter is d… |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.10 | oriWirelessIfAllowedSupportedDataRates | 0 | 0 | This parameter reflects the transmit rates supported by the physical interface or radio card. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.11 | oriWirelessIfRegulatoryDomainList | 0 | 0 | This parameter specifies to which regulatory domain the interface belongs to. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.12 | oriWirelessIfAllowedChannels | 0 | 0 | This parameter reflects the radio frequency channels that the interface supports. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.13 | oriWirelessIfMACAddress | 0 | 0 | The MAC address of the ORiNOCO PC card inserted in the ORiNOCO device. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.14 | oriWirelessIfLoadBalancing | 0 | 0 | This object is used to configure the load balancing feature in the ORiNOCO device. |
| 1.3.6.1.4.1.1751.2.4.2.1.1.1.15 | oriWirelessIfMediumDensityDistribution | 0 | 0 | This object is used to configure the medium density distribution feature in the ORiNOCO device. |