Entry definition.
Parsed from file atm.mib.txt
Company: None
Module: Wellfleet-ATM-MIB
Entry definition.
Parsed from file Wellfleet-ATM-MIB.mib
Module: Wellfleet-ATM-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-MIB
[Automatically extracted from oidview.com]
wfAtmInterfaceConfEntry OBJECT-TYPE SYNTAX WfAtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmInterfaceConfIndex } ::= { wfAtmInterfaceConfTable 1 }
wfAtmInterfaceConfEntry OBJECT-TYPE SYNTAX WfAtmInterfaceConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entry definition." INDEX { wfAtmInterfaceConfIndex } ::= { wfAtmInterfaceConfTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.4.23.1.1.1.1 | wfAtmInterfaceConfDelete | 0 | 0 | Create/delete MIB instance parameter. |
1.3.6.1.4.1.18.3.4.23.1.1.1.2 | wfAtmInterfaceConfIndex | 0 | 0 | Uniquely identifies the interface (port) that contains the appropriate management information. |
1.3.6.1.4.1.18.3.4.23.1.1.1.3 | wfAtmInterfaceAdminStatus | 0 | 0 | Specifies the desired administrative state of the Interface. The up and down states indicate that the traffic flow is enabled an… |
1.3.6.1.4.1.18.3.4.23.1.1.1.4 | wfAtmInterfaceOperStatus | 0 | 0 | Indicates the current operational status of the Interface. The up and down states indicate that the Interface is currently opera… |
1.3.6.1.4.1.18.3.4.23.1.1.1.5 | wfAtmInterfaceMaxVpcs | 0 | 0 | The maximum number of VPCs supported at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.6 | wfAtmInterfaceMaxVccs | 0 | 0 | The maximum number of VCCs supported at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.7 | wfAtmInterfaceConfVpcs | 0 | 0 | The number of VPCs configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.8 | wfAtmInterfaceConfVccs | 0 | 0 | The number of VCCs configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.9 | wfAtmInterfaceMaxActiveVpiBits | 0 | 0 | The maximum number of active VPI bits configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.10 | wfAtmInterfaceMaxActiveVciBits | 0 | 0 | The maximum number of active VCI bits configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.11 | wfAtmInterfaceIlmiVpi | 0 | 0 | The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlm… |
1.3.6.1.4.1.18.3.4.23.1.1.1.12 | wfAtmInterfaceIlmiVci | 0 | 0 | The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlm… |
1.3.6.1.4.1.18.3.4.23.1.1.1.13 | wfAtmInterfaceAddressType | 0 | 0 | The type of ATM address configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.14 | wfAtmInterfaceCct | 0 | 0 | The Wellfleet circuit number of this entry |
1.3.6.1.4.1.18.3.4.23.1.1.1.15 | wfAtmInterfaceDrops | 0 | 0 | The cumulative count of packet drops on this ATM Interface above the SSCS layer. |
1.3.6.1.4.1.18.3.4.23.1.1.1.16 | wfAtmInterfaceSigEnable | 0 | 0 | Spawning of ATM Signalling by the Control gate is determined by this attr |
1.3.6.1.4.1.18.3.4.23.1.1.1.17 | wfAtmInterfaceDebug | 0 | 0 | This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging (defaul… |
1.3.6.1.4.1.18.3.4.23.1.1.1.18 | wfAtmInterfaceUseHwMacAddr | 0 | 0 | If this is enabled, then the auto-generated ESI portion of the ATM address user suffix will be supplied by the hardware driver. I… |
1.3.6.1.4.1.18.3.4.23.1.1.1.19 | wfAtmInterfaceHwMacOverride | 0 | 0 | If wfAtmInterfaceUseHwMacAddr is disabled, this 48-bit Mac address will replace the hardware driver's address during auto-generat… |
1.3.6.1.4.1.18.3.4.23.1.1.1.20 | wfAtmServicePqOverride | 0 | 0 | This value denotes whether driver level PQ is to be applied to packets or driver decides to use the priority set by service level… |