The VPI value of the VCC supporting the ILMI at this ATM interface.
If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci
are both equal to zero then the ILMI is not supported at this ATM
interface. Subract 1 from the default! (ILMI VPI = 0).
Parsed from file atm.mib.txt
Company: None
Module: Wellfleet-ATM-MIB
The VPI value of the VCC supporting the ILMI at this ATM interface.
If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci
are both equal to zero then the ILMI is not supported at this ATM
interface. Subract 1 from the default! (ILMI VPI = 0).
Parsed from file Wellfleet-ATM-MIB.mib
Module: Wellfleet-ATM-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-MIB
[Automatically extracted from oidview.com]
wfAtmInterfaceIlmiVpi OBJECT-TYPE SYNTAX INTEGER { default(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface. Subract 1 from the default! (ILMI VPI = 0)." DEFVAL { default } ::= { wfAtmInterfaceConfEntry 11 }
wfAtmInterfaceIlmiVpi OBJECT-TYPE SYNTAX INTEGER { default(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface. Subract 1 from the default! (ILMI VPI = 0)." DEFVAL { default } ::= { wfAtmInterfaceConfEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.4.23.1.1.1.1 | wfAtmInterfaceConfDelete | 0 | 0 | Create/delete MIB instance parameter. |
1.3.6.1.4.1.18.3.4.23.1.1.1.2 | wfAtmInterfaceConfIndex | 0 | 0 | Uniquely identifies the interface (port) that contains the appropriate management information. |
1.3.6.1.4.1.18.3.4.23.1.1.1.3 | wfAtmInterfaceAdminStatus | 0 | 0 | Specifies the desired administrative state of the Interface. The up and down states indicate that the traffic flow is enabled an… |
1.3.6.1.4.1.18.3.4.23.1.1.1.4 | wfAtmInterfaceOperStatus | 0 | 0 | Indicates the current operational status of the Interface. The up and down states indicate that the Interface is currently opera… |
1.3.6.1.4.1.18.3.4.23.1.1.1.5 | wfAtmInterfaceMaxVpcs | 0 | 0 | The maximum number of VPCs supported at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.6 | wfAtmInterfaceMaxVccs | 0 | 0 | The maximum number of VCCs supported at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.7 | wfAtmInterfaceConfVpcs | 0 | 0 | The number of VPCs configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.8 | wfAtmInterfaceConfVccs | 0 | 0 | The number of VCCs configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.9 | wfAtmInterfaceMaxActiveVpiBits | 0 | 0 | The maximum number of active VPI bits configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.10 | wfAtmInterfaceMaxActiveVciBits | 0 | 0 | The maximum number of active VCI bits configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.12 | wfAtmInterfaceIlmiVci | 0 | 0 | The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlm… |
1.3.6.1.4.1.18.3.4.23.1.1.1.13 | wfAtmInterfaceAddressType | 0 | 0 | The type of ATM address configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.14 | wfAtmInterfaceCct | 0 | 0 | The Wellfleet circuit number of this entry |
1.3.6.1.4.1.18.3.4.23.1.1.1.15 | wfAtmInterfaceDrops | 0 | 0 | The cumulative count of packet drops on this ATM Interface above the SSCS layer. |
1.3.6.1.4.1.18.3.4.23.1.1.1.16 | wfAtmInterfaceSigEnable | 0 | 0 | Spawning of ATM Signalling by the Control gate is determined by this attr |
1.3.6.1.4.1.18.3.4.23.1.1.1.17 | wfAtmInterfaceDebug | 0 | 0 | This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging (defaul… |
1.3.6.1.4.1.18.3.4.23.1.1.1.18 | wfAtmInterfaceUseHwMacAddr | 0 | 0 | If this is enabled, then the auto-generated ESI portion of the ATM address user suffix will be supplied by the hardware driver. I… |
1.3.6.1.4.1.18.3.4.23.1.1.1.19 | wfAtmInterfaceHwMacOverride | 0 | 0 | If wfAtmInterfaceUseHwMacAddr is disabled, this 48-bit Mac address will replace the hardware driver's address during auto-generat… |
1.3.6.1.4.1.18.3.4.23.1.1.1.20 | wfAtmServicePqOverride | 0 | 0 | This value denotes whether driver level PQ is to be applied to packets or driver decides to use the priority set by service level… |