This flag will enable certain debug messages depending on the value set.
The values are as follows:
1 - disable debugging (default)
2 - enable Signalling Layer Manager inbound and outbound messages
4 - enable CC inbound messages
8 - enable CC outbound messages
16 - enable CC<->APP messages
32 - enable CC<->DRV messages
64 - enable CC<->TRILL messages
128 - enable CC PVC Interface FSM messages
256 - enable CC PVC Interface FSM messages
4294967295 - All of the above
Parsed from file atm.mib.txt
Company: None
Module: Wellfleet-ATM-MIB
This flag will enable certain debug messages depending on the value set.
The values are as follows:
1 - disable debugging (default)
2 - enable Signalling Layer Manager inbound and outbound messages
4 - enable CC inbound messages
8 - enable CC outbound messages
16 - enable CC<->APP messages
32 - enable CC<->DRV messages
64 - enable CC<->TRILL messages
128 - enable CC PVC Interface FSM messages
256 - enable CC PVC Interface FSM messages
4294967295 - All of the above
Parsed from file Wellfleet-ATM-MIB.mib
Module: Wellfleet-ATM-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-MIB
[Automatically extracted from oidview.com]
wfAtmInterfaceDebug OBJECT-TYPE SYNTAX INTEGER { disabled(1), msgs(2), msgsIn(4), msgsOut(8), appMsgs(16), drvMsgs(32), trilMsgs(64), pvcFsm(128), svcFsm(256), oam(512), all(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging (default) 2 - enable Signalling Layer Manager inbound and outbound messages 4 - enable CC inbound messages 8 - enable CC outbound messages 16 - enable CC<->APP messages 32 - enable CC<->DRV messages 64 - enable CC<->TRILL messages 128 - enable CC PVC Interface FSM messages 256 - enable CC PVC Interface FSM messages 4294967295 - All of the above" DEFVAL { disabled } ::= { wfAtmInterfaceConfEntry 17 }
wfAtmInterfaceDebug OBJECT-TYPE SYNTAX INTEGER { disabled(1), msgs(2), msgsIn(4), msgsOut(8), appMsgs(16), drvMsgs(32), trilMsgs(64), pvcFsm(128), svcFsm(256), oam(512), all(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION "This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging (default) 2 - enable Signalling Layer Manager inbound and outbound messages 4 - enable CC inbound messages 8 - enable CC outbound messages 16 - enable CC<->APP messages 32 - enable CC<->DRV messages 64 - enable CC<->TRILL messages 128 - enable CC PVC Interface FSM messages 256 - enable CC PVC Interface FSM messages 4294967295 - All of the above" DEFVAL { disabled } ::= { wfAtmInterfaceConfEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.23.1.1.1.1 | wfAtmInterfaceConfDelete | 0 | 0 | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.2 | wfAtmInterfaceConfIndex | 0 | 0 | Uniquely identifies the interface (port) that contains the appropriate management information. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.3 | wfAtmInterfaceAdminStatus | 0 | 0 | Specifies the desired administrative state of the Interface. The up and down states indicate that the traffic flow is enabled an… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.4 | wfAtmInterfaceOperStatus | 0 | 0 | Indicates the current operational status of the Interface. The up and down states indicate that the Interface is currently opera… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.5 | wfAtmInterfaceMaxVpcs | 0 | 0 | The maximum number of VPCs supported at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.6 | wfAtmInterfaceMaxVccs | 0 | 0 | The maximum number of VCCs supported at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.7 | wfAtmInterfaceConfVpcs | 0 | 0 | The number of VPCs configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.8 | wfAtmInterfaceConfVccs | 0 | 0 | The number of VCCs configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.9 | wfAtmInterfaceMaxActiveVpiBits | 0 | 0 | The maximum number of active VPI bits configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.10 | wfAtmInterfaceMaxActiveVciBits | 0 | 0 | The maximum number of active VCI bits configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.11 | wfAtmInterfaceIlmiVpi | 0 | 0 | The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlm… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.12 | wfAtmInterfaceIlmiVci | 0 | 0 | The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlm… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.13 | wfAtmInterfaceAddressType | 0 | 0 | The type of ATM address configured for use at the ATM interface. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.14 | wfAtmInterfaceCct | 0 | 0 | The Wellfleet circuit number of this entry |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.15 | wfAtmInterfaceDrops | 0 | 0 | The cumulative count of packet drops on this ATM Interface above the SSCS layer. |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.16 | wfAtmInterfaceSigEnable | 0 | 0 | Spawning of ATM Signalling by the Control gate is determined by this attr |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.18 | wfAtmInterfaceUseHwMacAddr | 0 | 0 | If this is enabled, then the auto-generated ESI portion of the ATM address user suffix will be supplied by the hardware driver. I… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.19 | wfAtmInterfaceHwMacOverride | 0 | 0 | If wfAtmInterfaceUseHwMacAddr is disabled, this 48-bit Mac address will replace the hardware driver's address during auto-generat… |
| 1.3.6.1.4.1.18.3.4.23.1.1.1.20 | wfAtmServicePqOverride | 0 | 0 | This value denotes whether driver level PQ is to be applied to packets or driver decides to use the priority set by service level… |