This value denotes whether driver level PQ is to be applied
to packets or driver decides to use the priority set by
service level PQ, if both service level and driver level PQ
is used.
Parsed from file atm.mib.txt
Company: None
Module: Wellfleet-ATM-MIB
This value denotes whether driver level PQ is to be applied
to packets or driver decides to use the priority set by
service level PQ, if both service level and driver level PQ
is used.
Parsed from file Wellfleet-ATM-MIB.mib
Module: Wellfleet-ATM-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-MIB
[Automatically extracted from oidview.com]
wfAtmServicePqOverride OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This value denotes whether driver level PQ is to be applied to packets or driver decides to use the priority set by service level PQ, if both service level and driver level PQ is used." DEFVAL { disabled } ::= { wfAtmInterfaceConfEntry 20}
wfAtmServicePqOverride OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This value denotes whether driver level PQ is to be applied to packets or driver decides to use the priority set by service level PQ, if both service level and driver level PQ is used." DEFVAL { disabled } ::= { wfAtmInterfaceConfEntry 20}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.4.23.1.1.1.1 | wfAtmInterfaceConfDelete | 0 | 0 | Create/delete MIB instance parameter. |
1.3.6.1.4.1.18.3.4.23.1.1.1.2 | wfAtmInterfaceConfIndex | 0 | 0 | Uniquely identifies the interface (port) that contains the appropriate management information. |
1.3.6.1.4.1.18.3.4.23.1.1.1.3 | wfAtmInterfaceAdminStatus | 0 | 0 | Specifies the desired administrative state of the Interface. The up and down states indicate that the traffic flow is enabled an… |
1.3.6.1.4.1.18.3.4.23.1.1.1.4 | wfAtmInterfaceOperStatus | 0 | 0 | Indicates the current operational status of the Interface. The up and down states indicate that the Interface is currently opera… |
1.3.6.1.4.1.18.3.4.23.1.1.1.5 | wfAtmInterfaceMaxVpcs | 0 | 0 | The maximum number of VPCs supported at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.6 | wfAtmInterfaceMaxVccs | 0 | 0 | The maximum number of VCCs supported at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.7 | wfAtmInterfaceConfVpcs | 0 | 0 | The number of VPCs configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.8 | wfAtmInterfaceConfVccs | 0 | 0 | The number of VCCs configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.9 | wfAtmInterfaceMaxActiveVpiBits | 0 | 0 | The maximum number of active VPI bits configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.10 | wfAtmInterfaceMaxActiveVciBits | 0 | 0 | The maximum number of active VCI bits configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.11 | wfAtmInterfaceIlmiVpi | 0 | 0 | The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlm… |
1.3.6.1.4.1.18.3.4.23.1.1.1.12 | wfAtmInterfaceIlmiVci | 0 | 0 | The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlm… |
1.3.6.1.4.1.18.3.4.23.1.1.1.13 | wfAtmInterfaceAddressType | 0 | 0 | The type of ATM address configured for use at the ATM interface. |
1.3.6.1.4.1.18.3.4.23.1.1.1.14 | wfAtmInterfaceCct | 0 | 0 | The Wellfleet circuit number of this entry |
1.3.6.1.4.1.18.3.4.23.1.1.1.15 | wfAtmInterfaceDrops | 0 | 0 | The cumulative count of packet drops on this ATM Interface above the SSCS layer. |
1.3.6.1.4.1.18.3.4.23.1.1.1.16 | wfAtmInterfaceSigEnable | 0 | 0 | Spawning of ATM Signalling by the Control gate is determined by this attr |
1.3.6.1.4.1.18.3.4.23.1.1.1.17 | wfAtmInterfaceDebug | 0 | 0 | This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging (defaul… |
1.3.6.1.4.1.18.3.4.23.1.1.1.18 | wfAtmInterfaceUseHwMacAddr | 0 | 0 | If this is enabled, then the auto-generated ESI portion of the ATM address user suffix will be supplied by the hardware driver. I… |
1.3.6.1.4.1.18.3.4.23.1.1.1.19 | wfAtmInterfaceHwMacOverride | 0 | 0 | If wfAtmInterfaceUseHwMacAddr is disabled, this 48-bit Mac address will replace the hardware driver's address during auto-generat… |