This represents the Router Identifier for NAT Synchronization
Only. This is used to detect the duplicate TCP connection
between peers. The value of it can be any integer which is
unique between all the NAT Syn peers this router has.
An IP Address of one of the router interfaces can be used as
the RouterID. Changing the value will result into breaking and
reconnecting using new ID with all the peers.'
Parsed from file nat.mib.txt
Company: None
Module: Wellfleet-NAT-MIB
This represents the Router Identifier for NAT Synchronization
Only. This is used to detect the duplicate TCP connection
between peers. The value of it can be any integer which is
unique between all the NAT Syn peers this router has.
An IP Address of one of the router interfaces can be used as
the RouterID. Changing the value will result into breaking and
reconnecting using new ID with all the peers.'
Parsed from file Wellfleet-NAT-MIB.mib
Module: Wellfleet-NAT-MIB
Vendor: Wellfleet
Module: Wellfleet-NAT-MIB
[Automatically extracted from oidview.com]
wfNatBaseSynRouterID OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This represents the Router Identifier for NAT Synchronization Only. This is used to detect the duplicate TCP connection between peers. The value of it can be any integer which is unique between all the NAT Syn peers this router has. An IP Address of one of the router interfaces can be used as the RouterID. Changing the value will result into breaking and reconnecting using new ID with all the peers.'" ::= { wfNatBase 13 }
wfNatBaseSynRouterID OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This represents the Router Identifier for NAT Synchronization Only. This is used to detect the duplicate TCP connection between peers. The value of it can be any integer which is unique between all the NAT Syn peers this router has. An IP Address of one of the router interfaces can be used as the RouterID. Changing the value will result into breaking and reconnecting using new ID with all the peers.'" ::= { wfNatBase 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.7.1.13.0 | wfNatBaseSynRouterID | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.7.1.1 | wfNatBaseDelete | 1 | 1 | 'This value determines whether NAT is configured' |
1.3.6.1.4.1.18.3.5.3.2.7.1.2 | wfNatBaseDisable | 1 | 1 | 'The administrative status of NAT in the router. The value 'enabled' denotes that the NAT Process is active on at least one inte… |
1.3.6.1.4.1.18.3.5.3.2.7.1.3 | wfNatBaseState | 1 | 1 | 'The state of NAT' |
1.3.6.1.4.1.18.3.5.3.2.7.1.4 | wfNatBaseSoloistSlotMask | 1 | 1 | Slot mask for which slots the soloist gate is eligible to run on. The MSBit represents slot 1, the next most significant bit rep… |
1.3.6.1.4.1.18.3.5.3.2.7.1.5 | wfNatBaseSoloistSlot | 1 | 1 | Slot on which NAT soloist gate is running. Slots can be 1-14. Default is zero. |
1.3.6.1.4.1.18.3.5.3.2.7.1.6 | wfNatBaseLogMask | 1 | 1 | A parameter to specify which NAT log messages should be logged. Each bit represents a message as defined below. A 1 in that bit … |
1.3.6.1.4.1.18.3.5.3.2.7.1.7 | wfNatBaseMapTimeout | 1 | 1 | This controls whether or not the dynamic mapping table entries are aged out when unused. |
1.3.6.1.4.1.18.3.5.3.2.7.1.8 | wfNatBaseMapMaxTimeout | 1 | 1 | The maximum time in seconds before unused NAT mapping table entries are deleted. This timeout or aging does not apply to static m… |
1.3.6.1.4.1.18.3.5.3.2.7.1.9 | wfNatBaseMapDynMapsCount | 1 | 1 | Number of Dynamic Mappings in the dymanic mapping table |
1.3.6.1.4.1.18.3.5.3.2.7.1.10 | wfNatBaseFtpSessionCount | 1 | 1 | Number of FTP sessions detected on this box translated by NAT |
1.3.6.1.4.1.18.3.5.3.2.7.1.11 | wfNatBaseNto1TrTotCount | 1 | 1 | Total number of active Nto1 translation counts on the box. |
1.3.6.1.4.1.18.3.5.3.2.7.1.12 | wfNatBaseSynchronization | 1 | 1 | The administrative status of NAT Synchronization in the router. The value `enabled' denotes that the NAT Synchronization is activ… |
1.3.6.1.4.1.18.3.5.3.2.7.1.14 | wfNatBaseSynPort | 1 | 1 | This represents the TCP port on which the connection requests from the peers will be accepted. When NAT Synchronization Protocol … |
1.3.6.1.4.1.18.3.5.3.2.7.1.15 | wfNatBaseSynKeepAlvInterval | 1 | 1 | Idle session timeout period, in seconds. If an established TCP connection remains inactive for this interval, KEEPALIVE messages… |
1.3.6.1.4.1.18.3.5.3.2.7.1.16 | wfNatBaseSynKeepAlvTimer | 1 | 1 | KEEPALIVE retransmit timeout period, in seconds. This is the interval at which unacknowledged KEEPALIVE messages will be retrans… |
1.3.6.1.4.1.18.3.5.3.2.7.1.17 | wfNatBaseSynKeepAlvRetries | 1 | 1 | Number of unacknowledged KEEPALIVE messages retransmitted before the TCP session is terminated. If this count is set to zero, on… |
1.3.6.1.4.1.18.3.5.3.2.7.1.18 | wfNatBaseLocalToLocalEnable | 1 | 1 | Allow forwarding of traffic from one local NAT interface to another local NAT interface. |
1.3.6.1.4.1.18.3.5.3.2.7.1.19 | wfNatBaseInstallUniPrivAddr | 1 | 1 | This MIB was added in BayRS 14.20 to address a compatibility issue concerning non-DNS NAT translations when upgrading from a pre-… |