A parameter to specify which NAT log messages should be logged.
Each bit represents a message as defined below. A 1 in that
bit location means to log it and a 0 means not to put that
log message in the log. Changing this value will NOT restart
NAT, but will take effct immediately(if there are any messages
to be logged.
bit 31 bit 0
+
| |
+
NAT_DBG_MIB_LOG 0x00000001
NAT_DBG_IP_LOG 0x00000002
NAT_DBG_FWD_LOG 0x00000004
NAT_DBG_MAPPING_LOG 0x00000008
NAT_DBG_AGING_LOG 0x00000010
NAT_DBG_SYNCH_LOG 0x00000020
Parsed from file nat.mib.txt
Company: None
Module: Wellfleet-NAT-MIB
A parameter to specify which NAT log messages should be logged.
Each bit represents a message as defined below. A 1 in that
bit location means to log it and a 0 means not to put that
log message in the log. Changing this value will NOT restart
NAT, but will take effct immediately(if there are any messages
to be logged.
bit 31 bit 0
+
| |
+
NAT_DBG_MIB_LOG 0x00000001
NAT_DBG_IP_LOG 0x00000002
NAT_DBG_FWD_LOG 0x00000004
NAT_DBG_MAPPING_LOG 0x00000008
NAT_DBG_AGING_LOG 0x00000010
NAT_DBG_SYNCH_LOG 0x00000020
Parsed from file Wellfleet-NAT-MIB.mib
Module: Wellfleet-NAT-MIB
Vendor: Wellfleet
Module: Wellfleet-NAT-MIB
[Automatically extracted from oidview.com]
wfNatBaseLogMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A parameter to specify which NAT log messages should be logged. Each bit represents a message as defined below. A 1 in that bit location means to log it and a 0 means not to put that log message in the log. Changing this value will NOT restart NAT, but will take effct immediately(if there are any messages to be logged. bit 31 bit 0 + | | + NAT_DBG_MIB_LOG 0x00000001 NAT_DBG_IP_LOG 0x00000002 NAT_DBG_FWD_LOG 0x00000004 NAT_DBG_MAPPING_LOG 0x00000008 NAT_DBG_AGING_LOG 0x00000010 NAT_DBG_SYNCH_LOG 0x00000020 " DEFVAL { 0 } ::= { wfNatBase 6 }
wfNatBaseLogMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A parameter to specify which NAT log messages should be logged. Each bit represents a message as defined below. A 1 in that bit location means to log it and a 0 means not to put that log message in the log. Changing this value will NOT restart NAT, but will take effct immediately(if there are any messages to be logged. bit 31 bit 0 + | | + NAT_DBG_MIB_LOG 0x00000001 NAT_DBG_IP_LOG 0x00000002 NAT_DBG_FWD_LOG 0x00000004 NAT_DBG_MAPPING_LOG 0x00000008 NAT_DBG_AGING_LOG 0x00000010 NAT_DBG_SYNCH_LOG 0x00000020 " DEFVAL { 0 } ::= { wfNatBase 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.7.1.6.0 | wfNatBaseLogMask | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.2.7.1.1 | wfNatBaseDelete | 1 | 1 | 'This value determines whether NAT is configured' |
1.3.6.1.4.1.18.3.5.3.2.7.1.2 | wfNatBaseDisable | 1 | 1 | 'The administrative status of NAT in the router. The value 'enabled' denotes that the NAT Process is active on at least one inte… |
1.3.6.1.4.1.18.3.5.3.2.7.1.3 | wfNatBaseState | 1 | 1 | 'The state of NAT' |
1.3.6.1.4.1.18.3.5.3.2.7.1.4 | wfNatBaseSoloistSlotMask | 1 | 1 | Slot mask for which slots the soloist gate is eligible to run on. The MSBit represents slot 1, the next most significant bit rep… |
1.3.6.1.4.1.18.3.5.3.2.7.1.5 | wfNatBaseSoloistSlot | 1 | 1 | Slot on which NAT soloist gate is running. Slots can be 1-14. Default is zero. |
1.3.6.1.4.1.18.3.5.3.2.7.1.7 | wfNatBaseMapTimeout | 1 | 1 | This controls whether or not the dynamic mapping table entries are aged out when unused. |
1.3.6.1.4.1.18.3.5.3.2.7.1.8 | wfNatBaseMapMaxTimeout | 1 | 1 | The maximum time in seconds before unused NAT mapping table entries are deleted. This timeout or aging does not apply to static m… |
1.3.6.1.4.1.18.3.5.3.2.7.1.9 | wfNatBaseMapDynMapsCount | 1 | 1 | Number of Dynamic Mappings in the dymanic mapping table |
1.3.6.1.4.1.18.3.5.3.2.7.1.10 | wfNatBaseFtpSessionCount | 1 | 1 | Number of FTP sessions detected on this box translated by NAT |
1.3.6.1.4.1.18.3.5.3.2.7.1.11 | wfNatBaseNto1TrTotCount | 1 | 1 | Total number of active Nto1 translation counts on the box. |
1.3.6.1.4.1.18.3.5.3.2.7.1.12 | wfNatBaseSynchronization | 1 | 1 | The administrative status of NAT Synchronization in the router. The value `enabled' denotes that the NAT Synchronization is activ… |
1.3.6.1.4.1.18.3.5.3.2.7.1.13 | wfNatBaseSynRouterID | 1 | 1 | This represents the Router Identifier for NAT Synchronization Only. This is used to detect the duplicate TCP connection between p… |
1.3.6.1.4.1.18.3.5.3.2.7.1.14 | wfNatBaseSynPort | 1 | 1 | This represents the TCP port on which the connection requests from the peers will be accepted. When NAT Synchronization Protocol … |
1.3.6.1.4.1.18.3.5.3.2.7.1.15 | wfNatBaseSynKeepAlvInterval | 1 | 1 | Idle session timeout period, in seconds. If an established TCP connection remains inactive for this interval, KEEPALIVE messages… |
1.3.6.1.4.1.18.3.5.3.2.7.1.16 | wfNatBaseSynKeepAlvTimer | 1 | 1 | KEEPALIVE retransmit timeout period, in seconds. This is the interval at which unacknowledged KEEPALIVE messages will be retrans… |
1.3.6.1.4.1.18.3.5.3.2.7.1.17 | wfNatBaseSynKeepAlvRetries | 1 | 1 | Number of unacknowledged KEEPALIVE messages retransmitted before the TCP session is terminated. If this count is set to zero, on… |
1.3.6.1.4.1.18.3.5.3.2.7.1.18 | wfNatBaseLocalToLocalEnable | 1 | 1 | Allow forwarding of traffic from one local NAT interface to another local NAT interface. |
1.3.6.1.4.1.18.3.5.3.2.7.1.19 | wfNatBaseInstallUniPrivAddr | 1 | 1 | This MIB was added in BayRS 14.20 to address a compatibility issue concerning non-DNS NAT translations when upgrading from a pre-… |