Action object to do the following:
warmstart - Reboots the device. Firmware and configuration
information is maintained.
clearallactiveSA - All active SA entries are removed.
clearARPcache - All entries in the ARP cache are removed.
clearmessagetable - All entries in the status message table
will be removed.
resettodefaults - IP address and subnet mask are maintained. All
other configuration information is removed. Firmware is maintained.
resettofactorydefaults - All configuration information is removed.
Firmware is maintained.
eraseflash - Firmware is removed and the device will be in BOOT
ROM mode. Configuration information is maintained.
disablebox - Delete Box's manufactured certificate and private key.
**
** WARNING: this function will render the Ravlin box useless.
** Use only when device is no longer required to be in service FOREVER.
**
Parsed from file Ravlin.mib.txt
Company: None
Module: RCV3
Action object to do the following:
warmstart - Reboots the device. Firmware and configuration
information is maintained.
clearallactiveSA - All active SA entries are removed.
clearARPcache - All entries in the ARP cache are removed.
clearmessagetable - All entries in the status message table
will be removed.
resettodefaults - IP address and subnet mask are maintained. All
other configuration information is removed. Firmware is maintained.
resettofactorydefaults - All configuration information is removed.
Firmware is maintained.
eraseflash - Firmware is removed and the device will be in BOOT
ROM mode. Configuration information is maintained.
disablebox - Delete Box's manufactured certificate and private key.
**
** WARNING: this function will render the Ravlin box useless.
** Use only when device is no longer required to be in service FOREVER.
**
Parsed from file RCV3.mib
Module: RCV3
Vendor: Red Creek Communications, Inc.
Module: RCV3
[Automatically extracted from oidview.com]
rc3Reset OBJECT-TYPE SYNTAX INTEGER { other(1), warmstart(2), clearallactiveSA(3), clearARPcache(4), clearmessagetable(5), resettodefaults(6), resettofactorydefaults(7), eraseflash(8), disablebox(9) } ACCESS read-write STATUS mandatory DESCRIPTION "Action object to do the following: warmstart - Reboots the device. Firmware and configuration information is maintained. clearallactiveSA - All active SA entries are removed. clearARPcache - All entries in the ARP cache are removed. clearmessagetable - All entries in the status message table will be removed. resettodefaults - IP address and subnet mask are maintained. All other configuration information is removed. Firmware is maintained. resettofactorydefaults - All configuration information is removed. Firmware is maintained. eraseflash - Firmware is removed and the device will be in BOOT ROM mode. Configuration information is maintained. disablebox - Delete Box's manufactured certificate and private key. ** ** WARNING: this function will render the Ravlin box useless. ** Use only when device is no longer required to be in service FOREVER. ** " ::= { rc3Control 1 }
rc3Reset OBJECT-TYPE SYNTAX INTEGER { other(1), warmstart(2), clearallactiveSA(3), clearARPcache(4), clearmessagetable(5), resettodefaults(6), resettofactorydefaults(7), eraseflash(8), disablebox(9) } ACCESS read-write STATUS mandatory DESCRIPTION "Action object to do the following: warmstart - Reboots the device. Firmware and configuration information is maintained. clearallactiveSA - All active SA entries are removed. clearARPcache - All entries in the ARP cache are removed. clearmessagetable - All entries in the status message table will be removed. resettodefaults - IP address and subnet mask are maintained. All other configuration information is removed. Firmware is maintained. resettofactorydefaults - All configuration information is removed. Firmware is maintained. eraseflash - Firmware is removed and the device will be in BOOT ROM mode. Configuration information is maintained. disablebox - Delete Box's manufactured certificate and private key. ** ** WARNING: this function will render the Ravlin box useless. ** Use only when device is no longer required to be in service FOREVER. ** " ::= { rc3Control 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1958.1.1.8.3.1.0 | rc3Reset | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1958.1.1.8.3.2 | rc3ArpCacheCleanupInterval | 1 | 1 | The duration in minutes to cleanup ARP cache. |
| 1.3.6.1.4.1.1958.1.1.8.3.3 | rc3Password | 1 | 1 | Object used to set new password for the box. For SNMP set operations the password is encrypted. The key for encrypt/Decrypt is g… |
| 1.3.6.1.4.1.1958.1.1.8.3.4 | rc3OperationalMode | 1 | 1 | The desired state of the Ravlin. For the passall and vpnready modes, the device will act as either a router or a bridge dependi… |
| 1.3.6.1.4.1.1958.1.1.8.3.5 | rc3InactiveClientTimeout | 1 | 1 | The duration in minutes to tear down the SA between the RavSoft client and Ravlin server. |
| 1.3.6.1.4.1.1958.1.1.8.3.6 | rc3DHCPServerIP | 1 | 1 | IP Address of the DHCP server. This address can ONLY configured manually by SNMP. |
| 1.3.6.1.4.1.1958.1.1.8.3.7 | rc3DHCPRequest | 1 | 1 | This is Bit Masked Object. Zero or more bits can be set or cleared. Bit 0 - Enable/Disable DHCP on the Local Port Bit 1 - Enable/… |
| 1.3.6.1.4.1.1958.1.1.8.3.8 | rc3PasswordFips | 1 | 1 | Available for release 3.30 and up. Object used to set new password for the box. Refer to the textual convention of PbeShaEncrypt… |
| 1.3.6.1.4.1.1958.1.1.8.3.9 | rc3DHCPRelayIpAddr | 1 | 1 | IP Address to be used for DHCP Relay. This is used when the Ravlin unit redeives a DHCP request from the Ravsoft client. |
| 1.3.6.1.4.1.1958.1.1.8.3.10 | rc3SysPerfTimeBetweenPolls | 1 | 1 | rc3SysPerftimeBetweenPolls |
| 1.3.6.1.4.1.1958.1.1.8.3.11 | rc3SysPerfTimeBetweenReports | 1 | 1 | rc3SysPerftimeBetweenReports |
| 1.3.6.1.4.1.1958.1.1.8.3.12 | rc3SysPerfTrapThreshold | 1 | 1 | rc3SysPerftrapThreshold |
| 1.3.6.1.4.1.1958.1.1.8.3.13 | rc3DHCPBroadcastIntf | 1 | 1 | Indentify the interface to broadcast DHCP requests. When the DHCP server IP Address is not a broadcast address, then SNMP agent … |
| 1.3.6.1.4.1.1958.1.1.8.3.14 | rc3StateLessDHCP | 1 | 1 | Enables a head end device not to keep state information for DHCP records, used in DHCP relay. This will allow head end to be in c… |