This is Bit Masked Object. Zero or more bits can be set or cleared.
Bit 0 - Enable/Disable DHCP on the Local Port
Bit 1 - Enable/Disable DHCP on the Remote Port
Bit 2 - Tunnel local host's DHCP request
If the Bit is set, then DHCP is enabled, else it is disabled. By default
DHCP is enabled on both ports.
Parsed from file Ravlin.mib.txt
Company: None
Module: RCV3
This is Bit Masked Object. Zero or more bits can be set or cleared.
Bit 0 - Enable/Disable DHCP on the Local Port
Bit 1 - Enable/Disable DHCP on the Remote Port
Bit 2 - Tunnel local host's DHCP request
If the Bit is set, then DHCP is enabled, else it is disabled. By default
DHCP is enabled on both ports.
Parsed from file RCV3.mib
Module: RCV3
Vendor: Red Creek Communications, Inc.
Module: RCV3
[Automatically extracted from oidview.com]
rc3DHCPRequest OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is Bit Masked Object. Zero or more bits can be set or cleared. Bit 0 - Enable/Disable DHCP on the Local Port Bit 1 - Enable/Disable DHCP on the Remote Port Bit 2 - Tunnel local host's DHCP request If the Bit is set, then DHCP is enabled, else it is disabled. By default DHCP is enabled on both ports." ::= { rc3Control 7 }
rc3DHCPRequest OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is Bit Masked Object. Zero or more bits can be set or cleared. Bit 0 - Enable/Disable DHCP on the Local Port Bit 1 - Enable/Disable DHCP on the Remote Port Bit 2 - Tunnel local host's DHCP request If the Bit is set, then DHCP is enabled, else it is disabled. By default DHCP is enabled on both ports." ::= { rc3Control 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1958.1.1.8.3.7.0 | rc3DHCPRequest | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1958.1.1.8.3.1 | rc3Reset | 1 | 1 | Action object to do the following: warmstart - Reboots the device. Firmware and configuration information is maintained. clearal… |
| 1.3.6.1.4.1.1958.1.1.8.3.2 | rc3ArpCacheCleanupInterval | 1 | 1 | The duration in minutes to cleanup ARP cache. |
| 1.3.6.1.4.1.1958.1.1.8.3.3 | rc3Password | 1 | 1 | Object used to set new password for the box. For SNMP set operations the password is encrypted. The key for encrypt/Decrypt is g… |
| 1.3.6.1.4.1.1958.1.1.8.3.4 | rc3OperationalMode | 1 | 1 | The desired state of the Ravlin. For the passall and vpnready modes, the device will act as either a router or a bridge dependi… |
| 1.3.6.1.4.1.1958.1.1.8.3.5 | rc3InactiveClientTimeout | 1 | 1 | The duration in minutes to tear down the SA between the RavSoft client and Ravlin server. |
| 1.3.6.1.4.1.1958.1.1.8.3.6 | rc3DHCPServerIP | 1 | 1 | IP Address of the DHCP server. This address can ONLY configured manually by SNMP. |
| 1.3.6.1.4.1.1958.1.1.8.3.8 | rc3PasswordFips | 1 | 1 | Available for release 3.30 and up. Object used to set new password for the box. Refer to the textual convention of PbeShaEncrypt… |
| 1.3.6.1.4.1.1958.1.1.8.3.9 | rc3DHCPRelayIpAddr | 1 | 1 | IP Address to be used for DHCP Relay. This is used when the Ravlin unit redeives a DHCP request from the Ravsoft client. |
| 1.3.6.1.4.1.1958.1.1.8.3.10 | rc3SysPerfTimeBetweenPolls | 1 | 1 | rc3SysPerftimeBetweenPolls |
| 1.3.6.1.4.1.1958.1.1.8.3.11 | rc3SysPerfTimeBetweenReports | 1 | 1 | rc3SysPerftimeBetweenReports |
| 1.3.6.1.4.1.1958.1.1.8.3.12 | rc3SysPerfTrapThreshold | 1 | 1 | rc3SysPerftrapThreshold |
| 1.3.6.1.4.1.1958.1.1.8.3.13 | rc3DHCPBroadcastIntf | 1 | 1 | Indentify the interface to broadcast DHCP requests. When the DHCP server IP Address is not a broadcast address, then SNMP agent … |
| 1.3.6.1.4.1.1958.1.1.8.3.14 | rc3StateLessDHCP | 1 | 1 | Enables a head end device not to keep state information for DHCP records, used in DHCP relay. This will allow head end to be in c… |