Enables a head end device not to keep state information for DHCP
records, used in DHCP relay. This will allow head end to be in
cluster topology. When enabled, DHCP records will exchanged via
ISAKMP private notify messages after ISAKMP SA is established. If
disabled then DHCP records are saved in NVM.
Parsed from file Ravlin.mib.txt
Company: None
Module: RCV3
Enables a head end device not to keep state information for DHCP
records, used in DHCP relay. This will allow head end to be in
cluster topology. When enabled, DHCP records will exchanged via
ISAKMP private notify messages after ISAKMP SA is established. If
disabled then DHCP records are saved in NVM.
Parsed from file RCV3.mib
Module: RCV3
Vendor: Red Creek Communications, Inc.
Module: RCV3
[Automatically extracted from oidview.com]
rc3StateLessDHCP OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables a head end device not to keep state information for DHCP records, used in DHCP relay. This will allow head end to be in cluster topology. When enabled, DHCP records will exchanged via ISAKMP private notify messages after ISAKMP SA is established. If disabled then DHCP records are saved in NVM." ::= { rc3Control 14 }
rc3StateLessDHCP OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables a head end device not to keep state information for DHCP records, used in DHCP relay. This will allow head end to be in cluster topology. When enabled, DHCP records will exchanged via ISAKMP private notify messages after ISAKMP SA is established. If disabled then DHCP records are saved in NVM." ::= { rc3Control 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1958.1.1.8.3.14.0 | rc3StateLessDHCP | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1958.1.1.8.3.1 | rc3Reset | 1 | 1 | Action object to do the following: warmstart - Reboots the device. Firmware and configuration information is maintained. clearal… |
| 1.3.6.1.4.1.1958.1.1.8.3.2 | rc3ArpCacheCleanupInterval | 1 | 1 | The duration in minutes to cleanup ARP cache. |
| 1.3.6.1.4.1.1958.1.1.8.3.3 | rc3Password | 1 | 1 | Object used to set new password for the box. For SNMP set operations the password is encrypted. The key for encrypt/Decrypt is g… |
| 1.3.6.1.4.1.1958.1.1.8.3.4 | rc3OperationalMode | 1 | 1 | The desired state of the Ravlin. For the passall and vpnready modes, the device will act as either a router or a bridge dependi… |
| 1.3.6.1.4.1.1958.1.1.8.3.5 | rc3InactiveClientTimeout | 1 | 1 | The duration in minutes to tear down the SA between the RavSoft client and Ravlin server. |
| 1.3.6.1.4.1.1958.1.1.8.3.6 | rc3DHCPServerIP | 1 | 1 | IP Address of the DHCP server. This address can ONLY configured manually by SNMP. |
| 1.3.6.1.4.1.1958.1.1.8.3.7 | rc3DHCPRequest | 1 | 1 | This is Bit Masked Object. Zero or more bits can be set or cleared. Bit 0 - Enable/Disable DHCP on the Local Port Bit 1 - Enable/… |
| 1.3.6.1.4.1.1958.1.1.8.3.8 | rc3PasswordFips | 1 | 1 | Available for release 3.30 and up. Object used to set new password for the box. Refer to the textual convention of PbeShaEncrypt… |
| 1.3.6.1.4.1.1958.1.1.8.3.9 | rc3DHCPRelayIpAddr | 1 | 1 | IP Address to be used for DHCP Relay. This is used when the Ravlin unit redeives a DHCP request from the Ravsoft client. |
| 1.3.6.1.4.1.1958.1.1.8.3.10 | rc3SysPerfTimeBetweenPolls | 1 | 1 | rc3SysPerftimeBetweenPolls |
| 1.3.6.1.4.1.1958.1.1.8.3.11 | rc3SysPerfTimeBetweenReports | 1 | 1 | rc3SysPerftimeBetweenReports |
| 1.3.6.1.4.1.1958.1.1.8.3.12 | rc3SysPerfTrapThreshold | 1 | 1 | rc3SysPerftrapThreshold |
| 1.3.6.1.4.1.1958.1.1.8.3.13 | rc3DHCPBroadcastIntf | 1 | 1 | Indentify the interface to broadcast DHCP requests. When the DHCP server IP Address is not a broadcast address, then SNMP agent … |