If this object has a value of true(1) then
this interface will participate in the
active monitor selection process. If the
value is false(2) then it will not.
This object is only valid if the 'atmBrCfgMacPortType'
object indicates the port is a Token Ring port.
The special value '0' applies when the port is not
Token Ring.
Parsed from file IBM8281.MIB.txt
Company: ibm
Module: ATM-BRIDGE-MIB
Vendor: IBM
Module: ATM-BRIDGE-MIB (IBM8281.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
atmBrCfgMacTrActMonParticipate OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object has a value of true(1) then this interface will participate in the active monitor selection process. If the value is false(2) then it will not. This object is only valid if the 'atmBrCfgMacPortType' object indicates the port is a Token Ring port. The special value '0' applies when the port is not Token Ring." ::= { atmBrCfgMacLayerEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.8.1.1.1 | atmBrCfgMacEntityIndex | 0 | 0 | This object is a unique identifier of a instance in the atmBrCfgMacLayerTable. |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.3 | atmBrCfgMacPortType | 0 | 0 | This object reflects the MAC layer technology being employed at this port. The values are the same as that of the 'atmBrPortGenP… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.4 | atmBrCfgMacPortName | 0 | 0 | This object contains a textural name for this port. Instances are identified by 'dot1dBasePort' (RFC 1493) rather than 'ifIndex' … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.5 | atmBrCfgMacPortStpInitState | 0 | 0 | This object reflects whether the Spanning Tree Protocol (STP) on the port is enabled or disabled when the port is initialized. … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.6 | atmBrCfgMacAddress | 0 | 0 | This object reflects the 'burned-in' MAC address associated with this port. The MAC address will be presented in canonical format… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.7 | atmBrCfgMacLAA | 0 | 0 | This object reflects the Locally Administered Address (LAA) for this MAC layer entity. If the LAA is not configured, then this ob… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.8 | atmBrCfgMacMaxFrameSize | 0 | 0 | This object reflects the INFO size of a MAC frame that can be transmitted/received by this port. This value must be less than or… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.9 | atmBrCfgMacBridgingType | 0 | 0 | This object reflects the type of bridging that will occur at this port. transparent-only(2): the port will perform Transparent b… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.10 | atmBrCfgMacTrMediaSpeed | 0 | 0 | This object reflects the choosen speed of a Token Ring MAC layer entity. four-mbps(3): Attempt to configure the token ring port t… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.12 | atmBrCfgMacTrEarlyTokenRel | 0 | 0 | This object indicates whether the Early Token Release option is currently in use. A value of on(1) indicates that Early Token Rel… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.13 | atmBrCfgMacEnetConnectorType | 0 | 0 | This object reflects the type of physical connector being used for this port. It has the same values as the 'atmBrPortGenEnetCon… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.14 | atmBrCfgMacHopCnt | 0 | 0 | This object reflects the number of bridges a frame can traverse in a source-route bridging environment before being discarded. … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.15 | atmBrCfgMacAllowFullDuplex | 0 | 0 | This object allows this token ring port to run in full duplex mode. |