This object reflects the INFO size of a MAC
frame that can be transmitted/received by this
port. This value must be less than or equal
to the Maximum Bridge Frame Size (ie,
'atmBrCfgMaxBridgeFrameSize'). If a value greater
than the current Maximum Bridge Frame Size is
SET, then this object will take on the value of
Maximum Bridge Frame Size.
Parsed from file IBM8281.MIB.txt
Company: ibm
Module: ATM-BRIDGE-MIB
Vendor: IBM
Module: ATM-BRIDGE-MIB (IBM8281.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
atmBrCfgMacMaxFrameSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object reflects the INFO size of a MAC frame that can be transmitted/received by this port. This value must be less than or equal to the Maximum Bridge Frame Size (ie, 'atmBrCfgMaxBridgeFrameSize'). If a value greater than the current Maximum Bridge Frame Size is SET, then this object will take on the value of Maximum Bridge Frame Size." ::= { atmBrCfgMacLayerEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.8.1.1.1 | atmBrCfgMacEntityIndex | 0 | 0 | This object is a unique identifier of a instance in the atmBrCfgMacLayerTable. |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.3 | atmBrCfgMacPortType | 0 | 0 | This object reflects the MAC layer technology being employed at this port. The values are the same as that of the 'atmBrPortGenP… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.4 | atmBrCfgMacPortName | 0 | 0 | This object contains a textural name for this port. Instances are identified by 'dot1dBasePort' (RFC 1493) rather than 'ifIndex' … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.5 | atmBrCfgMacPortStpInitState | 0 | 0 | This object reflects whether the Spanning Tree Protocol (STP) on the port is enabled or disabled when the port is initialized. … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.6 | atmBrCfgMacAddress | 0 | 0 | This object reflects the 'burned-in' MAC address associated with this port. The MAC address will be presented in canonical format… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.7 | atmBrCfgMacLAA | 0 | 0 | This object reflects the Locally Administered Address (LAA) for this MAC layer entity. If the LAA is not configured, then this ob… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.9 | atmBrCfgMacBridgingType | 0 | 0 | This object reflects the type of bridging that will occur at this port. transparent-only(2): the port will perform Transparent b… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.10 | atmBrCfgMacTrMediaSpeed | 0 | 0 | This object reflects the choosen speed of a Token Ring MAC layer entity. four-mbps(3): Attempt to configure the token ring port t… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.11 | atmBrCfgMacTrActMonParticipate | 0 | 0 | If this object has a value of true(1) then this interface will participate in the active monitor selection process. If the value … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.12 | atmBrCfgMacTrEarlyTokenRel | 0 | 0 | This object indicates whether the Early Token Release option is currently in use. A value of on(1) indicates that Early Token Rel… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.13 | atmBrCfgMacEnetConnectorType | 0 | 0 | This object reflects the type of physical connector being used for this port. It has the same values as the 'atmBrPortGenEnetCon… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.14 | atmBrCfgMacHopCnt | 0 | 0 | This object reflects the number of bridges a frame can traverse in a source-route bridging environment before being discarded. … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.15 | atmBrCfgMacAllowFullDuplex | 0 | 0 | This object allows this token ring port to run in full duplex mode. |