This object reflects the type of physical connector
being used for this port. It has the same values
as the 'atmBrPortGenEnetConnectorType', with the
exception of 'default'.
rj45(1): Attempt to configure the Ethernet
port to use the rj45 interface. If this
fails then a configuration error has
occurred. The port will be left unconfigured.
aui(2): Attempt to configure the Ethernet
port to use the aui interface. If this
fails then a configuration error has
occurred. The port will be left unconfigured.
default(250): Let the hardware sense the connector type.
If a cable is connected to both physical connectors,
then the rj45 will be selected. If no cables are
connected, then the rj45 will be selected.
The determination of the appropriate connector type
only occurs once: as the system is powering on.
Cable connection changes (ie, swap from rj45 to aui)
while the system is running will not be sensed.
This value is primarily used when the system has
never been configured (ie, default configuration
is being utilized).
Parsed from file IBM8281.MIB.txt
Company: ibm
Module: ATM-BRIDGE-MIB
Vendor: IBM
Module: ATM-BRIDGE-MIB (IBM8281.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
atmBrCfgMacEnetConnectorType OBJECT-TYPE SYNTAX INTEGER { rj45(1), aui(2), default(250) } ACCESS read-write STATUS mandatory DESCRIPTION "This object reflects the type of physical connector being used for this port. It has the same values as the 'atmBrPortGenEnetConnectorType', with the exception of 'default'. rj45(1): Attempt to configure the Ethernet port to use the rj45 interface. If this fails then a configuration error has occurred. The port will be left unconfigured. aui(2): Attempt to configure the Ethernet port to use the aui interface. If this fails then a configuration error has occurred. The port will be left unconfigured. default(250): Let the hardware sense the connector type. If a cable is connected to both physical connectors, then the rj45 will be selected. If no cables are connected, then the rj45 will be selected. The determination of the appropriate connector type only occurs once: as the system is powering on. Cable connection changes (ie, swap from rj45 to aui) while the system is running will not be sensed. This value is primarily used when the system has never been configured (ie, default configuration is being utilized). " ::= { atmBrCfgMacLayerEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.8.1.1.1 | atmBrCfgMacEntityIndex | 0 | 0 | This object is a unique identifier of a instance in the atmBrCfgMacLayerTable. |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.3 | atmBrCfgMacPortType | 0 | 0 | This object reflects the MAC layer technology being employed at this port. The values are the same as that of the 'atmBrPortGenP… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.4 | atmBrCfgMacPortName | 0 | 0 | This object contains a textural name for this port. Instances are identified by 'dot1dBasePort' (RFC 1493) rather than 'ifIndex' … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.5 | atmBrCfgMacPortStpInitState | 0 | 0 | This object reflects whether the Spanning Tree Protocol (STP) on the port is enabled or disabled when the port is initialized. … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.6 | atmBrCfgMacAddress | 0 | 0 | This object reflects the 'burned-in' MAC address associated with this port. The MAC address will be presented in canonical format… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.7 | atmBrCfgMacLAA | 0 | 0 | This object reflects the Locally Administered Address (LAA) for this MAC layer entity. If the LAA is not configured, then this ob… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.8 | atmBrCfgMacMaxFrameSize | 0 | 0 | This object reflects the INFO size of a MAC frame that can be transmitted/received by this port. This value must be less than or… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.9 | atmBrCfgMacBridgingType | 0 | 0 | This object reflects the type of bridging that will occur at this port. transparent-only(2): the port will perform Transparent b… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.10 | atmBrCfgMacTrMediaSpeed | 0 | 0 | This object reflects the choosen speed of a Token Ring MAC layer entity. four-mbps(3): Attempt to configure the token ring port t… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.11 | atmBrCfgMacTrActMonParticipate | 0 | 0 | If this object has a value of true(1) then this interface will participate in the active monitor selection process. If the value … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.12 | atmBrCfgMacTrEarlyTokenRel | 0 | 0 | This object indicates whether the Early Token Release option is currently in use. A value of on(1) indicates that Early Token Rel… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.14 | atmBrCfgMacHopCnt | 0 | 0 | This object reflects the number of bridges a frame can traverse in a source-route bridging environment before being discarded. … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.15 | atmBrCfgMacAllowFullDuplex | 0 | 0 | This object allows this token ring port to run in full duplex mode. |