This object reflects the MAC layer technology
being employed at this port. The values are
the same as that of the 'atmBrPortGenPortType'
object, with the exception of 'atm' & 'default'.
iso88023-csmacd(7): Attempt to configure the
port to be an Ethernet. If this fails
then a configuration error has occurred.
The port will remain unconfigured and the
status of the port will be reflected by the LEDs.
iso88025-tokenRing(9): Attempt to configure
the port to be a token ring. If this fails
then a configuration error has occurred.
The port will remain unconfigured and the
status of the port will be reflected by the LEDs.
atm(37): Return value for atm-tr and atm-en
product specific configuration.
atm-tr(240): This is a configuration value only.
It is used to specify the type of emulated LAN
to use on the ATM interface.
atm-en(241): This is a configuration value only.
It used to specify the type of emulated LAN
to use on the ATM interface.
default(250): Attempt to configure the
port as sensed by hardware (ie, auto-sense).
When dealing with a legacy LAN port, a connection
to the media must be present for auto-sensing to
occur properly. The determination of which MAC
layer technology to configure the port for is only
made once: as the system is powering up. Switching
MAC layer technologies while the system is running
will not be detected. This value is primarily used
when the system has never been configured.
Instances are identified by 'dot1dBasePort' (RFC 1493)
rather than 'ifIndex' (MIB-II).
Parsed from file IBM8281.MIB.txt
Company: ibm
Module: ATM-BRIDGE-MIB
Vendor: IBM
Module: ATM-BRIDGE-MIB (IBM8281.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
atmBrCfgMacPortType OBJECT-TYPE SYNTAX INTEGER { iso88023-csmacd(7), iso88025-tokenRing(9), atm(37), atm-tr(240), atm-en(241), default(250) } ACCESS read-write STATUS mandatory DESCRIPTION "This object reflects the MAC layer technology being employed at this port. The values are the same as that of the 'atmBrPortGenPortType' object, with the exception of 'atm' & 'default'. iso88023-csmacd(7): Attempt to configure the port to be an Ethernet. If this fails then a configuration error has occurred. The port will remain unconfigured and the status of the port will be reflected by the LEDs. iso88025-tokenRing(9): Attempt to configure the port to be a token ring. If this fails then a configuration error has occurred. The port will remain unconfigured and the status of the port will be reflected by the LEDs. atm(37): Return value for atm-tr and atm-en product specific configuration. atm-tr(240): This is a configuration value only. It is used to specify the type of emulated LAN to use on the ATM interface. atm-en(241): This is a configuration value only. It used to specify the type of emulated LAN to use on the ATM interface. default(250): Attempt to configure the port as sensed by hardware (ie, auto-sense). When dealing with a legacy LAN port, a connection to the media must be present for auto-sensing to occur properly. The determination of which MAC layer technology to configure the port for is only made once: as the system is powering up. Switching MAC layer technologies while the system is running will not be detected. This value is primarily used when the system has never been configured. Instances are identified by 'dot1dBasePort' (RFC 1493) rather than 'ifIndex' (MIB-II)." ::= { atmBrCfgMacLayerEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.5.8.1.1.1 | atmBrCfgMacEntityIndex | 0 | 0 | This object is a unique identifier of a instance in the atmBrCfgMacLayerTable. |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.4 | atmBrCfgMacPortName | 0 | 0 | This object contains a textural name for this port. Instances are identified by 'dot1dBasePort' (RFC 1493) rather than 'ifIndex' … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.5 | atmBrCfgMacPortStpInitState | 0 | 0 | This object reflects whether the Spanning Tree Protocol (STP) on the port is enabled or disabled when the port is initialized. … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.6 | atmBrCfgMacAddress | 0 | 0 | This object reflects the 'burned-in' MAC address associated with this port. The MAC address will be presented in canonical format… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.7 | atmBrCfgMacLAA | 0 | 0 | This object reflects the Locally Administered Address (LAA) for this MAC layer entity. If the LAA is not configured, then this ob… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.8 | atmBrCfgMacMaxFrameSize | 0 | 0 | This object reflects the INFO size of a MAC frame that can be transmitted/received by this port. This value must be less than or… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.9 | atmBrCfgMacBridgingType | 0 | 0 | This object reflects the type of bridging that will occur at this port. transparent-only(2): the port will perform Transparent b… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.10 | atmBrCfgMacTrMediaSpeed | 0 | 0 | This object reflects the choosen speed of a Token Ring MAC layer entity. four-mbps(3): Attempt to configure the token ring port t… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.11 | atmBrCfgMacTrActMonParticipate | 0 | 0 | If this object has a value of true(1) then this interface will participate in the active monitor selection process. If the value … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.12 | atmBrCfgMacTrEarlyTokenRel | 0 | 0 | This object indicates whether the Early Token Release option is currently in use. A value of on(1) indicates that Early Token Rel… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.13 | atmBrCfgMacEnetConnectorType | 0 | 0 | This object reflects the type of physical connector being used for this port. It has the same values as the 'atmBrPortGenEnetCon… |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.14 | atmBrCfgMacHopCnt | 0 | 0 | This object reflects the number of bridges a frame can traverse in a source-route bridging environment before being discarded. … |
| 1.3.6.1.4.1.2.6.28.5.8.1.1.15 | atmBrCfgMacAllowFullDuplex | 0 | 0 | This object allows this token ring port to run in full duplex mode. |