The largest buffer utilization since sysUpTime
Parsed from file xlr30.mib.txt
Company: None
Module: RAPID-CITY-MIB
The largest buffer utilization since sysUpTime
Parsed from file RAPID-CITY.mib
Module: RAPID-CITY
rcSysBufferUtilPeak OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The largest buffer utilization since sysUpTime" ::= { rcSystem 14 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
rcSysBufferUtilPeak OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "The largest buffer utilization since sysUpTime" ::= { rcSystem 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.1.14.0 | rcSysBufferUtilPeak | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.2272.1.1.1 | rcSysIpAddr | 1 | 1 | This entity's IP address. |
| 1.3.6.1.4.1.2272.1.1.2 | rcSysNetMask | 1 | 1 | This entity's subnet mask. |
| 1.3.6.1.4.1.2272.1.1.3 | rcSysBroadcast | 1 | 1 | This entity's broadcast address. |
| 1.3.6.1.4.1.2272.1.1.4 | rcSysCommReadWriteAll | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string first. If it m… |
| 1.3.6.1.4.1.2272.1.1.5 | rcSysCommReadWrite | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string second. If it … |
| 1.3.6.1.4.1.2272.1.1.6 | rcSysCommReadOnly | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it m… |
| 1.3.6.1.4.1.2272.1.1.7 | rcSysVersion | 1 | 1 | Software version running on device |
| 1.3.6.1.4.1.2272.1.1.8 | rcSysAction | 1 | 1 | Initiate a system action. |
| 1.3.6.1.4.1.2272.1.1.9 | rcSysResult | 1 | 1 | Result from the last system action. |
| 1.3.6.1.4.1.2272.1.1.10 | rcSysLastChange | 1 | 1 | Last management initiated configuration change since sysUpTime. |
| 1.3.6.1.4.1.2272.1.1.11 | rcSysLastVlanChange | 1 | 1 | Last management initiated VLAN configuration change since sysUpTime. |
| 1.3.6.1.4.1.2272.1.1.12 | rcSysLastStatisticsReset | 1 | 1 | Last management initiated statistics reset since sysUpTime. |
| 1.3.6.1.4.1.2272.1.1.13 | rcSysBufferUtil | 1 | 1 | Buffer utilization as a percentage of the total amount of buffer space in the system. A high value indicates congestion. |
| 1.3.6.1.4.1.2272.1.1.15 | rcSysBufferUtilPeakTime | 1 | 1 | Timestamp for rcSysPeakBandwidth |
| 1.3.6.1.4.1.2272.1.1.16 | rcSysNVRamSize | 1 | 1 | Total Non-volatile RAM in Kbytes |
| 1.3.6.1.4.1.2272.1.1.17 | rcSysNVRamUsed | 1 | 1 | Non-volatile RAM in use in Kbytes |
| 1.3.6.1.4.1.2272.1.1.18 | rcSysLastSaveToNVRam | 1 | 1 | SysUpTime of the last time when NVRAM was written to. This could be a save of the system configuration or via a file transfer of… |
| 1.3.6.1.4.1.2272.1.1.19 | rcSysLastSaveToStandbyNVRam | 1 | 1 | SysUpTime of the last time when the standby NVRAM (on the back-up CPU board) was written to. |
| 1.3.6.1.4.1.2272.1.1.20 | rcSysCpuUtil | 1 | 1 | Percentage of CPU utilization |
| 1.3.6.1.4.1.2272.1.1.21 | rcSysSwitchFabricUtil | 1 | 1 | Percentage of Switching Fabric utilization |
| 1.3.6.1.4.1.2272.1.1.22 | rcSysRmonMemSize | 1 | 1 | Amount of RAM in bytes to allocate for RMON to use when rcSysRmonEnable is TRUE. |
| 1.3.6.1.4.1.2272.1.1.23 | rcSysRmonEnable | 1 | 1 | Control whether the RMON feature should be enabled. To enable the RMON feature, set this variable to true. The RMON agent in the … |
| 1.3.6.1.4.1.2272.1.1.24 | rcSysRmonSaveConfig | 1 | 1 | Control whether RMON configuration information should be saved to NVRAM so RMON settings can be automatically reinstalled after a… |
| 1.3.6.1.4.1.2272.1.1.25 | rcSysRmonTrapOption | 1 | 1 | Used to indicate whether RMON traps should be sent to only the owner of the RMON alarm (i.e., the manager that created the alarm … |
| 1.3.6.1.4.1.2272.1.1.26 | rcSysSupportRouting | 1 | 1 | Used to indicate whether routing is supported in this product. |
| 1.3.6.1.4.1.2272.1.1.27 | rcSysSupportWebServer | 1 | 1 | Used to indicate whether WebServer is supported in this product. |
| 1.3.6.1.4.1.2272.1.1.28 | rcSysLastIpAddrChange | 1 | 1 | Last management initiated IP address change since sysUpTime. Any addition or deletion of an IP address to a single routable port… |
| 1.3.6.1.4.1.2272.1.1.29 | rcSysCommReadWriteLayer3 | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it m… |
| 1.3.6.1.4.1.2272.1.1.30 | rcSysCommReadWriteLayer2 | 1 | 1 | When an SNMP message is received by this entity, the community string in the message is compared with this string fourth. If it … |
| 1.3.6.1.4.1.2272.1.1.31 | rcSysAccessPolicyEnable | 1 | 1 | Used to configure the system access policy feature. if 'true', the rcSysAccessPolicyTable is examined to determine which packets … |
| 1.3.6.1.4.1.2272.1.1.32 | rcSysDefaultRuntimeConfigFileName | 1 | 1 | default config. |
| 1.3.6.1.4.1.2272.1.1.33 | rcSysDefaultBootConfigFileName | 1 | 1 | default boot config. |
| 1.3.6.1.4.1.2272.1.1.34 | rcSysConfigFileName | 1 | 1 | File name used in conjunction with rcSysAction. If rcSysAction is set to 'saveRuntimeConfig' or 'saveRuntimeConfigToSlave' then t… |
| 1.3.6.1.4.1.2272.1.1.35 | rcSysLastRunTimeConfigSave | 1 | 1 | SysUpTime of the last time when the run time configuration was written to. |
| 1.3.6.1.4.1.2272.1.1.36 | rcSysLastRunTimeConfigSaveToSlave | 1 | 1 | SysUpTime of the last time when the run time configuration was written to slave NVRAM. |
| 1.3.6.1.4.1.2272.1.1.37 | rcSysLastBootConfigSave | 1 | 1 | SysUpTime of the last time when the boot configuration was written to. |
| 1.3.6.1.4.1.2272.1.1.38 | rcSysLastBootConfigSaveOnSlave | 1 | 1 | SysUpTime of the last time when the boot configuration was written on the slave NVRAM. |
| 1.3.6.1.4.1.2272.1.1.39 | rcSysRmonUtilizationMethod | 1 | 1 | Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDupl… |
| 1.3.6.1.4.1.2272.1.1.40 | rcSysCommReadWriteLayer1 | 1 | 1 | read-write L1 access |
| 1.3.6.1.4.1.2272.1.1.41 | rcSysOtherBufferUtil | 1 | 1 | bw currently consumed |
| 1.3.6.1.4.1.2272.1.1.42 | rcSysOtherBufferUtilPeak | 1 | 1 | peak bw since reset |
| 1.3.6.1.4.1.2272.1.1.43 | rcSysOtherBufferUtilPeakTime | 1 | 1 | timestamp for rcSysPeakBw |
| 1.3.6.1.4.1.2272.1.1.44 | rcSysOtherCpuUtil | 1 | 1 | % cpu utilization |
| 1.3.6.1.4.1.2272.1.1.45 | rcSysOtherSwitchFabricUtil | 1 | 1 | % switch fabric util |
| 1.3.6.1.4.1.2272.1.1.46 | rcSysDramSize | 1 | 1 | Dram size in mega-bytes |
| 1.3.6.1.4.1.2272.1.1.47 | rcSysDramUsed | 1 | 1 | Dram used in percentage |
| 1.3.6.1.4.1.2272.1.1.48 | rcSysDramFree | 1 | 1 | Dram free size in kilo-bytes |
| 1.3.6.1.4.1.2272.1.1.49 | rcSysDramMaxBlockFree | 1 | 1 | Dram max block free size in kilo-bytes |
| 1.3.6.1.4.1.2272.1.1.51 | rcSysVirtualIpAddr | 1 | 1 | Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP addres… |
| 1.3.6.1.4.1.2272.1.1.52 | rcSysVirtualNetMask | 1 | 1 | Net mask of the management virtual Ip address |
| 1.3.6.1.4.1.2272.1.1.53 | rcSysReadWriteLevel | 1 | 1 | The status of the read/write level |
| 1.3.6.1.4.1.2272.1.1.55 | rcSysMTUSize | 1 | 1 | This is the maximum transmission size of frames that all the ports on the chassis support. |
| 1.3.6.1.4.1.2272.1.1.56 | rcSysClockSyncTime | 1 | 1 | Time interval at which RTC and system clocks are synchronized. |
| 1.3.6.1.4.1.2272.1.1.57 | rcSysForceTrapSender | 1 | 1 | This is a flag that if user wants to configured CLIP (Circuit Less IP) as trap originator. |
| 1.3.6.1.4.1.2272.1.1.58 | rcSysMrouteStrLimit | 1 | 1 | enable or disable mroute stream limit in system. |
| 1.3.6.1.4.1.2272.1.1.60 | rcSysTrapRecvTable | 1 | 6 | The trap receiver table (0 to 25 entries). This table lists the addresses of Network Management Stations that should receive tra… |
| 1.3.6.1.4.1.2272.1.1.61 | rcSysAccessPolicyTable | 1 | 20 | Management access policy table. This table is used to permit or deny access to this device via the specified source Id. |
| 1.3.6.1.4.1.2272.1.1.62 | rcSysTrapSenderTable | 1 | 3 | The trap sender table (0 to 25 entries). This table lists the addresses of Network Management Stations and the Source Address th… |
| 1.3.6.1.4.1.2272.1.1.63 | rcSysDnsServerListTableSize | 1 | 1 | Used to indicate the number of entries in the table. |
| 1.3.6.1.4.1.2272.1.1.64 | rcSysDnsServerListTable | 1 | 9 | DNS serever list table used to store the details of the DNS server configured. |
| ... | ||||