Reference record for OID 1.3.6.1.4.1.272.4.25.1.1.15



parent
1.3.6.1.4.1.272.4.25.1.1 (serialIfEntry)
node code
15
node name
serialIfL1State
dot oid
1.3.6.1.4.1.272.4.25.1.1.15
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) bintec(272) bibo(4) serial(25) serialIfTable(1) serialIfEntry(1) serialIfL1State(15)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) bintec(272) bibo(4) serial(25) serialIfTable(1) serialIfEntry(1) serialIfL1State(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) bintec(272) bibo(4) serial(25) serialIfTable(1) serialIfEntry(1) serialIfL1State(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) bintec(272) bibo(4) serial(25) serialIfTable(1) serialIfEntry(1) serialIfL1State(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) bintec(272) bibo(4) serial(25) serialIfTable(1) serialIfEntry(1) serialIfL1State(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) bintec(272) bibo(4) serial(25) serialIfTable(1) serialIfEntry(1) serialIfL1State(15)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/bintec/bibo/serial/serialIfTable/serialIfEntry/serialIfL1State
  • /iso/identified-organization/dod/internet/private/enterprises/bintec/bibo/serial/serialIfTable/serialIfEntry/serialIfL1State
  • /iso/org/dod/internet/private/enterprise/bintec/bibo/serial/serialIfTable/serialIfEntry/serialIfL1State
  • /iso/org/dod/internet/private/enterprises/bintec/bibo/serial/serialIfTable/serialIfEntry/serialIfL1State
  • /iso/iso-identified-organization/dod/internet/private/enterprise/bintec/bibo/serial/serialIfTable/serialIfEntry/serialIfL1State
  • /iso/iso-identified-organization/dod/internet/private/enterprises/bintec/bibo/serial/serialIfTable/serialIfEntry/serialIfL1State
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/272/4/25/1/1/15

    Description by mibdepot

    The serial physical layer state
    dn(1) physical layer is inactive
    up(2) physical layer is active

    Parsed from file mibserial.mib.txt
    Company: None
    Module: BIANCA-BRICK-SERIAL-MIB

    Description by circitor

    The serial physical layer state
    dn(1) physical layer is inactive
    up(2) physical layer is active

    Parsed from file BIANCA-BRICK-SERIAL-MIB.mib
    Module: BIANCA-BRICK-SERIAL-MIB

    Information by oid_info

    Vendor: BinTec Communications GmbH
    Module: BIANCA-BRICK-SERIAL-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    serialIfL1State OBJECT-TYPE
            SYNTAX  INTEGER { dn(1), up(2) }
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The serial physical layer state
 		  dn(1)		physical layer is inactive
                  up(2)		physical layer is active"
	::= { serialIfEntry 15 }

    Information by circitor

    serialIfL1State OBJECT-TYPE
            SYNTAX  INTEGER { dn(1), up(2) }
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The serial physical layer state
 		  dn(1)		physical layer is inactive
                  up(2)		physical layer is active"
	::= { serialIfEntry 15 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.272)

    Hertlein Elisabeth

    Brothers (26)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.272.4.25.1.1.1 serialIfIndex 0 0 Unique interface index of the serial interface.
    1.3.6.1.4.1.272.4.25.1.1.2 serialIfType 0 0 serialIftype
    1.3.6.1.4.1.272.4.25.1.1.3 serialIfConnector 0 0 The physical connector type.
    When configured as DCE the pins on the output connector
    act as a DCE interface. If configured as DTE…
    1.3.6.1.4.1.272.4.25.1.1.4 serialIfLeads 0 0 The value of IfLeads has influence on the state of the
    physical layer (L1State). When configured as
    IfLeads=enabled, the state of…
    1.3.6.1.4.1.272.4.25.1.1.5 serialIfClock 0 0 The physical layer (layer 1) clocking mode.
    When configured as AUTO the clock provided depends what is
    configured on connector. I…
    1.3.6.1.4.1.272.4.25.1.1.6 serialIfClockEdge 0 0 The value of IfClockEdge influences the (internal) active
    clock edge(s) for generating/sampling data on the serial line.
    This val…
    1.3.6.1.4.1.272.4.25.1.1.8 serialIfSpeed 0 0 The serial interface speed in bits per second. The range
    is dependant on the type of the line (balanced/unbalanced)
    and the quali…
    1.3.6.1.4.1.272.4.25.1.1.10 serialIfL2Mode 0 0 The layer 2 mode. This value has influence on the
    HDLC address field (first byte of a HDCL frame). When
    configured as DTE the add…
    1.3.6.1.4.1.272.4.25.1.1.11 serialIfCableDetection 0 0 Cable autodetection for:
    manual(1) disabled
    auto(2) serialIfType and serialIfConnector
    iftype(3) serialIfType
    connector(…
    1.3.6.1.4.1.272.4.25.1.1.12 serialIfCableType 0 0 Show the detected cable type:
    unknown(1) cable type unknown.
    x21(2) DB15, X27/V11 (sync)
    v35(3) …
    1.3.6.1.4.1.272.4.25.1.1.13 serialIfCableConnector 0 0 Show the detected cable connector type:
    dte(1) DTE cable
    dce(2) DCE cable
    unknown(3) cable type unknown.…
    1.3.6.1.4.1.272.4.25.1.1.14 serialIfBundle 0 0 Index of the bundle to aggregate multiple Channels
    to one interface.
    1.3.6.1.4.1.272.4.25.1.1.16 serialIfSpeedReal 0 0 In DCE/internal clock mode this is the rounded speed in bits per
    second, because not every baudrate can exactly be generated.
    In …
    1.3.6.1.4.1.272.4.25.1.1.20 serialIfRxPackets 0 0 Count of received valid Frames.
    1.3.6.1.4.1.272.4.25.1.1.21 serialIfRxOctets 0 0 Count of received bytes.
    1.3.6.1.4.1.272.4.25.1.1.22 serialIfTxPackets 0 0 serialIftxPackets
    1.3.6.1.4.1.272.4.25.1.1.23 serialIfTxOctets 0 0 serialIftxOctets
    1.3.6.1.4.1.272.4.25.1.1.24 serialIfRxResets 0 0 Count of receiver resets. Under rare circumstances it
    might be necessary to reset the receiver to work
    properly.
    1.3.6.1.4.1.272.4.25.1.1.25 serialIfRxAborts 0 0 Count of receiver aborts. The sender of a frame can
    indicate a frame as aborted with a special Abort
    sequence.
    1.3.6.1.4.1.272.4.25.1.1.26 serialIfRxOverruns 0 0 Count of receiver overruns. If the serial port is unable
    to grant sufficiently soon/often the bus, the
    RxFIFO may fill up. This l…
    1.3.6.1.4.1.272.4.25.1.1.27 serialIfRxCRCErrors 0 0 Count of corrupted frames. Errors due to interference
    on the serial cable.
    1.3.6.1.4.1.272.4.25.1.1.28 serialIfRxGiantFrames 0 0 Count of received frames with illegal framesize. This
    can occur if a frame delimiter is destroyed.
    1.3.6.1.4.1.272.4.25.1.1.29 serialIfTxResets 0 0 serialIftxResets
    1.3.6.1.4.1.272.4.25.1.1.30 serialIfTxAborts 0 0 serialIftxAborts
    1.3.6.1.4.1.272.4.25.1.1.31 serialIfTxUnderruns 0 0 serialIftxUnderruns
    1.3.6.1.4.1.272.4.25.1.1.32 serialIfTxGiantFrames 0 0 serialIftxGiantFrames