serialIftxGiantFrames
View at oid-info.com
Count of transmitted frames with illegal
framesize. This can occur if an upper module creates
packets with more than the maximum allowed packet size.
Parsed from file mibserial.mib.txt
Company: None
Module: BIANCA-BRICK-SERIAL-MIB
Count of transmitted frames with illegal
framesize. This can occur if an upper module creates
packets with more than the maximum allowed packet size.
Parsed from file BIANCA-BRICK-SERIAL-MIB.mib
Module: BIANCA-BRICK-SERIAL-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-SERIAL-MIB
[Automatically extracted from oidview.com]
serialIfTxGiantFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of transmitted frames with illegal framesize. This can occur if an upper module creates packets with more than the maximum allowed packet size." ::= { serialIfEntry 32 }
serialIfTxGiantFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of transmitted frames with illegal framesize. This can occur if an upper module creates packets with more than the maximum allowed packet size." ::= { serialIfEntry 32 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.25.1.1.1 | serialIfIndex | 0 | 0 | Unique interface index of the serial interface. |
| 1.3.6.1.4.1.272.4.25.1.1.2 | serialIfType | 0 | 0 | serialIftype |
| 1.3.6.1.4.1.272.4.25.1.1.3 | serialIfConnector | 0 | 0 | The physical connector type. When configured as DCE the pins on the output connector act as a DCE interface. If configured as DTE… |
| 1.3.6.1.4.1.272.4.25.1.1.4 | serialIfLeads | 0 | 0 | The value of IfLeads has influence on the state of the physical layer (L1State). When configured as IfLeads=enabled, the state of… |
| 1.3.6.1.4.1.272.4.25.1.1.5 | serialIfClock | 0 | 0 | The physical layer (layer 1) clocking mode. When configured as AUTO the clock provided depends what is configured on connector. I… |
| 1.3.6.1.4.1.272.4.25.1.1.6 | serialIfClockEdge | 0 | 0 | The value of IfClockEdge influences the (internal) active clock edge(s) for generating/sampling data on the serial line. This val… |
| 1.3.6.1.4.1.272.4.25.1.1.8 | serialIfSpeed | 0 | 0 | The serial interface speed in bits per second. The range is dependant on the type of the line (balanced/unbalanced) and the quali… |
| 1.3.6.1.4.1.272.4.25.1.1.10 | serialIfL2Mode | 0 | 0 | The layer 2 mode. This value has influence on the HDLC address field (first byte of a HDCL frame). When configured as DTE the add… |
| 1.3.6.1.4.1.272.4.25.1.1.11 | serialIfCableDetection | 0 | 0 | Cable autodetection for: manual(1) disabled auto(2) serialIfType and serialIfConnector iftype(3) serialIfType connector(… |
| 1.3.6.1.4.1.272.4.25.1.1.12 | serialIfCableType | 0 | 0 | Show the detected cable type: unknown(1) cable type unknown. x21(2) DB15, X27/V11 (sync) v35(3) … |
| 1.3.6.1.4.1.272.4.25.1.1.13 | serialIfCableConnector | 0 | 0 | Show the detected cable connector type: dte(1) DTE cable dce(2) DCE cable unknown(3) cable type unknown.… |
| 1.3.6.1.4.1.272.4.25.1.1.14 | serialIfBundle | 0 | 0 | Index of the bundle to aggregate multiple Channels to one interface. |
| 1.3.6.1.4.1.272.4.25.1.1.15 | serialIfL1State | 0 | 0 | The serial physical layer state dn(1) physical layer is inactive up(2) physical layer is active |
| 1.3.6.1.4.1.272.4.25.1.1.16 | serialIfSpeedReal | 0 | 0 | In DCE/internal clock mode this is the rounded speed in bits per second, because not every baudrate can exactly be generated. In … |
| 1.3.6.1.4.1.272.4.25.1.1.20 | serialIfRxPackets | 0 | 0 | Count of received valid Frames. |
| 1.3.6.1.4.1.272.4.25.1.1.21 | serialIfRxOctets | 0 | 0 | Count of received bytes. |
| 1.3.6.1.4.1.272.4.25.1.1.22 | serialIfTxPackets | 0 | 0 | serialIftxPackets |
| 1.3.6.1.4.1.272.4.25.1.1.23 | serialIfTxOctets | 0 | 0 | serialIftxOctets |
| 1.3.6.1.4.1.272.4.25.1.1.24 | serialIfRxResets | 0 | 0 | Count of receiver resets. Under rare circumstances it might be necessary to reset the receiver to work properly. |
| 1.3.6.1.4.1.272.4.25.1.1.25 | serialIfRxAborts | 0 | 0 | Count of receiver aborts. The sender of a frame can indicate a frame as aborted with a special Abort sequence. |
| 1.3.6.1.4.1.272.4.25.1.1.26 | serialIfRxOverruns | 0 | 0 | Count of receiver overruns. If the serial port is unable to grant sufficiently soon/often the bus, the RxFIFO may fill up. This l… |
| 1.3.6.1.4.1.272.4.25.1.1.27 | serialIfRxCRCErrors | 0 | 0 | Count of corrupted frames. Errors due to interference on the serial cable. |
| 1.3.6.1.4.1.272.4.25.1.1.28 | serialIfRxGiantFrames | 0 | 0 | Count of received frames with illegal framesize. This can occur if a frame delimiter is destroyed. |
| 1.3.6.1.4.1.272.4.25.1.1.29 | serialIfTxResets | 0 | 0 | serialIftxResets |
| 1.3.6.1.4.1.272.4.25.1.1.30 | serialIfTxAborts | 0 | 0 | serialIftxAborts |
| 1.3.6.1.4.1.272.4.25.1.1.31 | serialIfTxUnderruns | 0 | 0 | serialIftxUnderruns |