serialIftype
View at oid-info.com
The serial physical interface type
none(1) interface disabled
x21(2) X21(V11) terminated (sync)
v35(3) V35(V11 & V28) (sync)
v36(4) V36(V10 & V11) (sync)
x21bis(5) RS232(V28) (sync)
rs422(6) X21(V11) not terminated (sync)
rs449(7) RS449(V10 & V11) (sync)
rs530(8) RS530(V10 & V11) (sync)
rs530a(9) RS530A(V10 & V11) (sync)
Parsed from file mibserial.mib.txt
Company: None
Module: BIANCA-BRICK-SERIAL-MIB
The serial physical interface type
none(1) interface disabled
x21(2) X.21/V11 (synchronous)
v35(3) V.35/V11 (synchronous)
v36(4) V.36/V11 (synchronous)
x21bis(5) RS232/V.28 (synchronous)
Parsed from file BIANCA-BRICK-SERIAL-MIB.mib
Module: BIANCA-BRICK-SERIAL-MIB
Vendor: BinTec Communications GmbH
Module: BIANCA-BRICK-SERIAL-MIB
[Automatically extracted from oidview.com]
serialIfType OBJECT-TYPE SYNTAX INTEGER { none(1), x21(2), v35(3), v36(4), x21bis(5), rs422(6), rs449(7), rs530(8), rs530a(9) } ACCESS read-write STATUS mandatory DESCRIPTION "The serial physical interface type none(1) interface disabled x21(2) X21(V11) terminated (sync) v35(3) V35(V11 & V28) (sync) v36(4) V36(V10 & V11) (sync) x21bis(5) RS232(V28) (sync) rs422(6) X21(V11) not terminated (sync) rs449(7) RS449(V10 & V11) (sync) rs530(8) RS530(V10 & V11) (sync) rs530a(9) RS530A(V10 & V11) (sync) " ::= { serialIfEntry 2 }
serialIfType OBJECT-TYPE SYNTAX INTEGER { none(1), x21(2), v35(3), v36(4), x21bis(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The serial physical interface type none(1) interface disabled x21(2) X.21/V11 (synchronous) v35(3) V.35/V11 (synchronous) v36(4) V.36/V11 (synchronous) x21bis(5) RS232/V.28 (synchronous)" ::= { serialIfEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.25.1.1.1 | serialIfIndex | 0 | 0 | Unique interface index of the serial interface. |
| 1.3.6.1.4.1.272.4.25.1.1.3 | serialIfConnector | 0 | 0 | The physical connector type. When configured as DCE the pins on the output connector act as a DCE interface. If configured as DTE… |
| 1.3.6.1.4.1.272.4.25.1.1.4 | serialIfLeads | 0 | 0 | The value of IfLeads has influence on the state of the physical layer (L1State). When configured as IfLeads=enabled, the state of… |
| 1.3.6.1.4.1.272.4.25.1.1.5 | serialIfClock | 0 | 0 | The physical layer (layer 1) clocking mode. When configured as AUTO the clock provided depends what is configured on connector. I… |
| 1.3.6.1.4.1.272.4.25.1.1.6 | serialIfClockEdge | 0 | 0 | The value of IfClockEdge influences the (internal) active clock edge(s) for generating/sampling data on the serial line. This val… |
| 1.3.6.1.4.1.272.4.25.1.1.8 | serialIfSpeed | 0 | 0 | The serial interface speed in bits per second. The range is dependant on the type of the line (balanced/unbalanced) and the quali… |
| 1.3.6.1.4.1.272.4.25.1.1.10 | serialIfL2Mode | 0 | 0 | The layer 2 mode. This value has influence on the HDLC address field (first byte of a HDCL frame). When configured as DTE the add… |
| 1.3.6.1.4.1.272.4.25.1.1.11 | serialIfCableDetection | 0 | 0 | Cable autodetection for: manual(1) disabled auto(2) serialIfType and serialIfConnector iftype(3) serialIfType connector(… |
| 1.3.6.1.4.1.272.4.25.1.1.12 | serialIfCableType | 0 | 0 | Show the detected cable type: unknown(1) cable type unknown. x21(2) DB15, X27/V11 (sync) v35(3) … |
| 1.3.6.1.4.1.272.4.25.1.1.13 | serialIfCableConnector | 0 | 0 | Show the detected cable connector type: dte(1) DTE cable dce(2) DCE cable unknown(3) cable type unknown.… |
| 1.3.6.1.4.1.272.4.25.1.1.14 | serialIfBundle | 0 | 0 | Index of the bundle to aggregate multiple Channels to one interface. |
| 1.3.6.1.4.1.272.4.25.1.1.15 | serialIfL1State | 0 | 0 | The serial physical layer state dn(1) physical layer is inactive up(2) physical layer is active |
| 1.3.6.1.4.1.272.4.25.1.1.16 | serialIfSpeedReal | 0 | 0 | In DCE/internal clock mode this is the rounded speed in bits per second, because not every baudrate can exactly be generated. In … |
| 1.3.6.1.4.1.272.4.25.1.1.20 | serialIfRxPackets | 0 | 0 | Count of received valid Frames. |
| 1.3.6.1.4.1.272.4.25.1.1.21 | serialIfRxOctets | 0 | 0 | Count of received bytes. |
| 1.3.6.1.4.1.272.4.25.1.1.22 | serialIfTxPackets | 0 | 0 | serialIftxPackets |
| 1.3.6.1.4.1.272.4.25.1.1.23 | serialIfTxOctets | 0 | 0 | serialIftxOctets |
| 1.3.6.1.4.1.272.4.25.1.1.24 | serialIfRxResets | 0 | 0 | Count of receiver resets. Under rare circumstances it might be necessary to reset the receiver to work properly. |
| 1.3.6.1.4.1.272.4.25.1.1.25 | serialIfRxAborts | 0 | 0 | Count of receiver aborts. The sender of a frame can indicate a frame as aborted with a special Abort sequence. |
| 1.3.6.1.4.1.272.4.25.1.1.26 | serialIfRxOverruns | 0 | 0 | Count of receiver overruns. If the serial port is unable to grant sufficiently soon/often the bus, the RxFIFO may fill up. This l… |
| 1.3.6.1.4.1.272.4.25.1.1.27 | serialIfRxCRCErrors | 0 | 0 | Count of corrupted frames. Errors due to interference on the serial cable. |
| 1.3.6.1.4.1.272.4.25.1.1.28 | serialIfRxGiantFrames | 0 | 0 | Count of received frames with illegal framesize. This can occur if a frame delimiter is destroyed. |
| 1.3.6.1.4.1.272.4.25.1.1.29 | serialIfTxResets | 0 | 0 | serialIftxResets |
| 1.3.6.1.4.1.272.4.25.1.1.30 | serialIfTxAborts | 0 | 0 | serialIftxAborts |
| 1.3.6.1.4.1.272.4.25.1.1.31 | serialIfTxUnderruns | 0 | 0 | serialIftxUnderruns |
| 1.3.6.1.4.1.272.4.25.1.1.32 | serialIfTxGiantFrames | 0 | 0 | serialIftxGiantFrames |